Abstract：GUM Sup.1 is concerned with the propagation of distribution through a mathematical model of measurement as a basis for evaluation of uncertainty of measurement. It introduced the principles and the detail processes of Adaptive Monte Carlo method to carry out the propagation of distribution. Then two measurement models were provided, including linear model and non-linear model, to validate the applicative of Adaptive Monte Carlo method. And it proved that both models reached the reasonable evaluation results. At the same time, some problems such as how to choose proper Monte Carlo simulation sample M and numerical tolerance δ were still need to be further researched.
［1］BIPM,IEC,IFCC,ISO,IUPAC,IUPAP,OIML. Guide to the expression of uncertainty in measurement［S］. 1995.
［2］BIPM/JCGM. Evaluation of Measurement Data-Supplement 1 to the ‘Guide to the Expression of Uncertainty in Measurement’-Propagation of Distributions using a Monte Carlo method ［S］. 2008.
［3］王伟,宋明顺,陈意华,等. 蒙特卡罗方法在复杂模型测量不确定度评定中的应用 ［J］. 仪器仪表学报, 2008, 29 (7): 1446-1449.
［4］陈怀艳,曹芸,韩洁. 基于蒙特卡罗法的测量不确定度评定 ［J］. 电子测量与仪器学报,2011, 25(4): 301-308.
［5］Sommer K D, Kühn O, León F P, et al. A Bayesion approach to information fusion for evaluation the measurement uncertainty［J］. Robotics and Autonomous Systems, 2009, 57:339-344.
［6］Forbes A B. An MCMC algorithm based on GUM Supplement 1 for uncertainty evaluation［J］. Measurement, 2012,45(5): 1188-1199.
［7］崔孝海,曲璐. 蒙特卡罗方法在微波功率测量不确定度分析中的应用 ［J］. 计量学报,2008,29(1): 56-60.
［8］赵玉华,袁峰,丁振良,等. 基于合作目标的姿态测量系统建模及精度的蒙特卡罗估计 ［J］. 仪器仪表学报,2010, 31 (8): 1873-1877.
［9］马修水, 费业泰, 李光, 等. 坐标测量机动态测量不确定度评定研究［J］. 仪器仪表学报, 2008, 29 (10): 2146-2149.
［10］曹芸, 陈怀艳, 韩洁. 采用MCM对GUM法测量不确定度评定的验证方法研究［J］. 宇航计测技术, 2012, 32(2): 75-78.
［11］Theodorou D, Zanniko Y, Anastopoulos G, et al. Coverage interval estimation of the measurement of Gross Heat of Combustion of fuel by bomb calorimetry: Comparison of ISO GUM adaptive Monte Carlo method ［J］. Thermochimica Acta,2011,526(1): 122-129.
［12］Andolfatto L, Mayer R,Lavernhe S. Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance［J］. International Journal of Machine Tools & Manufacture,2011,51(7):618-627.
2016, Vol. 37 
