Abstract：A practical high gas temperature sensor is introduced, including overall structure design, sensitive element design, ceramic insulator selection, shield design and shell design aimed at a certain working condition. During key structure and size design of the shield, a model based on double heat conduction is put forward by which design method of high gas temperature sensor is optimized, then verification test of the design result has been carried out in the hot wind tunnel. Test result shows that the designed temperature sensor has a relative measuring error of 0.2%~1.3% and can be used for precise measurement of high gas temperature in aviation and aerospace fields.
赵俭. 基于双热传导方程的高温燃气温度传感器设计方法[J]. 计量学报, 2022, 43(2): 215-221.
ZHAO Jian. Design Method of High Gas Temperature Sensor Based on Double Heat Conduction Equation. Acta Metrologica Sinica, 2022, 43(2): 215-221.
［1］Erell E, Leal V, Maldonado E. Measurement of Air Temperature in the Presence of a Large Radiant Flux: an Assessment of Passively Ventilated Thermometer Screens ［J］. Boundary-Layer Meteorology, 2005, 114: 205-231.
［2］Struk P, Dietrich D, Valentine R, et al. Comparisons of Gas-Phase Temperature Measurements in a Flame Using Thin-Filament Pyrometry and Thermocouples［C］//41st Aerospace Sciences Meeting and Exhibit, Reno, US, 2003.
［3］Chernovsky M K, Atreya A. Transient Measurements of Temperature and Radiation Intensity in Spherical Microgr-avity Diffusion Flames［C］//44th AIAA Aeros-pace Sciences Meeting and Exhibit, Reno, US, 2006.
［4］Daniels G E. Measurement of Gas Temperature and the Radiation Compensating Thermocouple ［J］. Journal of Applied Meteorology, 1968, 7: 1026-1035.
［5］Alvermann W, Stottmann P. Temperature Measurements with Thermocouples in Combustion Gases［R］. Washington: NASA, 1965.
［6］Rein C R, OLoughlin J R. Measurement of the error of temperature sensors in flowing gases ［J］. AIAA Journal, 1972, 10 (7): 954-956.
［7］Fernelius M, Gorrell S. Thermocouple Recovery Factor for Temperature Measurements in Turbomachinery Test Facilities［C］//52nd Aerospace Sciences Meeting, National Harbor, US, 2014.
［8］Natsui G, Ricklick M A, Nguyen C Q, et al. Temper-ature Measurements of Porous Media for Transpiration Studies［C］//46th AIAA/ASME/SAE/ASEE Joint Prop-ulsion Conference and Exhibit, Nashville, US, 2010.
［9］赵俭, 荆卓寅, 李亚晋. 高温气流温度传感器测温偏差关键影响因素分析 ［J］. 航空发动机, 2017, 43 (3): 78-82.
Zhao J, Jing Z Y, Li Y J. Analysis of Key Influencing Factors on Temperature Measuring Deviation of High Gas Temperature Sensors ［J］. Aeroengine, 2017, 43 (3): 78-82.
［10］赵俭, 杨永军, 王毅. 一种新型无冷却式气流高温传感器 ［J］. 计量学报, 2015, 36 (6A): 79-82.
Zhao J, Yang Y J, Wang Y. A New-typed Non-cooled High Gas Temperature Sensor ［J］. Acta Metrologica Sinica, 2015, 36 (6A): 79-82.
［11］Gumen V, Illyas B, Maqsood A, et al. High-Temper-ature Thermal Conductivity of Ceramic Fibers ［J］. Journal of Materials Engineering and Performance, 2001, 10: 475-478.
［12］Fertig M. Finite Rate Surface Catalysis Modeling of PM1000 and SiC Employing the DLR CFD Solver［C］//Proc. of the 8th European Symposium on Aerothermo-dynamics for Space Vehicles, Lisbon, Portugal, 2015.
［13］Vincent P, Jeans S V, Cyril C, et al. Design and Optimization of a High Temperature Water Cooled Probe for Gas Analysis Measurement on K11 Combustor Test Rig［R］. ASME GT2011-45177, 2011.
［14］Zheng C H, Cheng L M, Saveliev A, et al. Gas and Solid Phase Temperature Measurements of Orous Media Combustion ［J］. Proceedings of the Combustion Institute, 2011, 33 (2): 3301-3308.
［15］Dukhan N, Al-Rammahi M A, Suleiman A S. Fluid Temperature Measurements Inside Metal Foam and Comparison to Brinkman-Darcy Flow Convection Analysis ［J］. International Journal of Heat and Mass Transfer, 2013, 67: 877-884.
［16］Ito Y, Inokura N, Nagasaki T. Conjugate Heat Transfer in Air-to-Refrigerant Airfoil Heat Exchangers［J］. ASME Journal of Heat Transfer, 2014, 136: 1-12.
2022, Vol. 43 
