Abstract：Aiming at the evaluation of effective of bit of ADC converters, the influences of sinewave parameters are studied in detailed. Through experiment, one can get the conclusion: the best condition of minimum evaluation error of effective bit is that, 1) the peak to peak amplitude of sinusoidal should be odd number times of least significant bit (LSB), 2) the offset of sinusoidal must be integer times of LSB, 3) the initial phase of sinusoidal can’t influence the evaluation results of effective bit of ADC. when the offset of sinewave is the integer times of LSB adds 0.5LSB, it can make the worst error. This conclusion can be used in evaluation of effective bit of ADC converters.
梁志国. 正弦波形参量对A/D有效位数评价的影响[J]. 计量学报, 2017, 38(1): 91-97.
LIANG Zhi-guo. The Influence of Sinusoidal Parameters in Evaluation of Effective Bit of ADC Converters by Curve-fit Method. Acta Metrologica Sinica, 2017, 38(1): 91-97.
［1］Kuffel J,Mccomb T R, Malewski R. Comparative evaluation of computer methods for calculating the best fit sinusoid to the high purity sine wave［J］.IEEE Transactions on Instrumentation and Measurement, 1987, 36(2): 418-422.
［2］Mccomb T R, Kuffel J, Roux B C L. A comparative evaluation of some practical algorithms used in the effective bits test of waveform recorders［J］.IEEE Transactions on Instrumentation and Measurement, 1989, 38(1): 37-42.
［3］Wagdy M F, Awad S S. Determining ADC Effective Number of Bits Via Histogram Testing ［J］.IEEE Transactions on Instrumentation and Measurement, 1991, 40 (4): 770-772.
［4］Bertocco M, Narduzzi C, Paglierani P, et al. Accuracy of effective bit estimation methods ［J］.IEEE transactions on Instrumentation and Measurement, 1997, 46 (4): 1011-1015.
［5］Yih-Chyun Jenq, Crosby P B. Sinewave Parameter Estimation Algorithm with Application to Waveform Digitizer Effective Bits Measurement ［J］.IEEE Transactions on Instrumentation and Measurement,1988, 37 (4): 529-532.
［6］Zhang Jianqiu , Zhao Xinmin, Hu Xiao, et al. Sinewave fit algorithm based on total least-squares method with application to ADC effective bits measurement ［J］. IEEE transactions on Instrumentation and Measurement,1997, 46 (4): 1026-1030.
［7］梁志国,朱济杰,孟晓风.四参数正弦曲线拟合的一种收敛算法［J］.仪器仪表学报,2006,27(11):1513-1519.
［8］Nandel P. Properties of the IEEE-STD-1057 Four-Parameter Sine Wave Fit Algorithm ［J］.IEEE Transactions on Instrumentation and Measurement, 2000, 49(6): 1189-1193.
［9］Kollar I, Blair J J. Improved determination of the best fitting sine wave in ADC testing［J］. IEEE Transactions on Instrumentation and Measurement, 2005, 54 (5): 1978-1983.
［10］Blair J J. Sine-fitting software for IEEE standards 1057 and 1241［C］//Proc IEEE Instrumentation Measurement Technology Conf, 1999: 1504-1506.
［11］Blair J J, Linnenbrink T. Corrected rms error and effective number of bits for sinewave ADC tests［J］.Computer Standards & Interfaces, 2004, 26(1): 43-49.
［12］Belega D, Dallet D, Petri D. A High-Performance Procedure for Effective Number of Bits Estimation in Analog-to-Digital Converters［J］. IEEE Transactions on Instrumentation and Measurement,2011, 60(5): 1522-1532.
［13］Belega D, Petri D. Statistical Performance of the Effective-Number-of-Bit Estimators Provided by the Sine-Fitting Algorithms［J］.IEEE Transactions on Instrumentation and Measurement,2013, 62(3): 633-640.
［14］梁志国.基于正弦失真测量的A/D动态有效位数评价［J］.计量学报,2014,35(4): 258-262.
［15］国家技术监督局.JJF1048—1995,数据采集系统校准规范［S］.1995.
［16］IEEE Std 1057—1994, IEEE Standard for Digitizing Waveform Recorders ［S］.1994.
［17］梁志国.数据采集系统校准中的若干问题研究［D］. 北京:北京航空航天大学,2009.
2017, Vol. 38 
