Abstract：A design of a double channels telescope system for space laser communications synthetic parameter test is proposed. The long focal channel can be used for far field distribution measurement of the terminals and afocal channel can be used for the measurement of tracking and pointing accuracy. The principle of the measurement of the far field distribution, tracking and pointing accuracy of space laser communication is analyzed.A double channels telescope system was designed which could construct off-axis Cassegrain system or of-axis three-mirror afocal system, respectively. The working spectral range of the system is 800～1 700 nm and the clear aperture size is 300mm. The performances of the system were tested. The test result demonstrates that the wavefront error of long focal channel is 0.097λ(λ=632.8 nm),and the wavefront error of afocal channel is 0.048λ which both meet the design requirements.
［1］Araki K, Toyoshima M, Takahashi T, et al. Expermental Operations of Laser Communication Equipment Onboard ETS-VI Satellite［J］. Proc of SPIE, 1997, 2990: 264-275.
［2］Kim I I, Riley B, Wong N M, et al. Lessons Learned from the STRV-2 Satellite-to-Gr-ound Lasercom Experiment［J］. Proc of SPIE, 2001, 4272: 1-15.
［3］Nielsen T T, Oppenhuser G. In Orbit Test Result of an Operational Inter-satellite Link Between ARTEMIS and SPOT4, SILEX［J］. Proc of SPIE, 2002, 4635: 1-15.
［4］Fields R, Lunde C, Wonga R, et al. NFIRE-to-TerraSAR-X Laser Communication Results: Satellite Pointing, Disturbances, and Other Attributes Consis-tent With Successful Performance［J］. Proc of SPIE, 2009, 7330: 73300Q.
［5］杨清波. 星地下行相干激光通信系统接收性能研究［D］. 哈尔滨:哈尔滨工业大学, 2012.
［6］王建民, 王丽丽, 徐泉, 等. 卫星激光通信端机远场分布测试分析及测试系统设计［J］. 光电子·激光, 2008, 19（11）:1467-1473.
［7］Jia J J, Yang M D, Zhang L, et al. Design of ground testing systems which are compatible with two kinds of communication termianals［J］. Proc SPIE, 2013, 8906: 89061U.
［8］Planche G, Laurent B, Guillen J C, et al. Silex final ground testing and in flight performances assessment［J］. Proc of SPIE, 1999, 3615: 64-77.
［9］马建荣,郝群,朱秋东,等. 逆向哈特曼面形测量法中最佳针孔直径确定［J］. 计量学报, 2014, 35(1): 39-43.
2016, Vol. 37 
