Abstract：The improved quartz-flexure accelerometer with independent developed condition-amplifier is adopted as the vibration pickup sensor in ultra-low frequency vibration feedback control, and as the standard implement for performance measuring of ultra-low frequency vibration primary standard device. The distortion of vibrator output acceleration waveform is decreased effectively, and the effect of environmental vibration is suppressed to some extent. The acceleration distortion is less than 1% above 0.002 Hz.It solves the measurement means problem caused by without measuring sensor below 1Hz.The stability and repeatability meet requirements of standard devices.It is considered that it can be used as the standard implement of calibration and the check standard for low frequency or ultra-low frequency vibration national primary standard and standard devices.
于梅,刘爱东,何闻,杨丽峰,胡红波,左爱斌,马明德. 石英挠性加速度计在超低频振动国家基准研制中的应用研究[J]. 计量学报, 2011, 32(3): 253-257.
YU Mei,LIU Ai-dong,HE Wen,YANG Li-feng,HU Hong-bo,ZUO Ai-bin,MA Ming-de. Application of the Quartz-flexure Accelerometer to the Development of Ultra-low Frequency Vibration National Primary Standard Device. Acta Metrologica Sinica, 2011, 32(3): 253-257.
［1］王武立.石英挠性伺服加速度计的原理和应用［J］.世界电子元器件,1996,10:40-42.
［2］李晓蕾.超低频振动校准系统若干关键技术的研究［D］.北京:北京航空航天大学,2006.
［3］胡红波.低频振动副基准振动激励系统反馈控制的研究［D］.北京:中国计量科学研究院,2008.
［4］Liu Y H,Huang Y J, et al.The Design and Implementation of Proportional Feedback Controller for the Distortion Improvement of Vibrator in Low Frequency Motion ［J］.Journal of low frequency noise,vibration and active control,2003,23(3):173-181.
［5］于梅.低频超低频振动计量技术的研究与展望［J］.振动与冲击, 2007,26(11):83-86.
［6］刘爱东,于梅.低频振动标准套组的研制［J］.计量学报,2010,31(3):238-240.
［7］JJG 233-2008,压电加速度计国家计量检定规程 ［S］.
［8］于梅,何闻,刘爱东,等. 超低频振动国家计量基准装置的研究与建立 ［J］. 计量学报,2011,32（2）:97-100.
2011, Vol. 32 
