Abstract：A method for measuring the low differential or gauge pressure with the combination of a piston gauge (PG), a digital pressure gauge (DPG) and a special connected way of a bypass is described. The problem of the lower pressure limit due to the load mass of the piston itself is solved. By the advantage of perfect short-term stability of the DPG and the lower uncertainty of the PG, the differential pressure or gauge pressure up to 10kPa could be measured, the expanded uncertainty of the measurement is 2.2Pa with k=2.
李燕华,孙俊峰. 基于活塞式压力计和数字压力计的微小压力测量新方法[J]. 计量学报, 2012, 33(6): 528-531.
LI Yan-hua,SUN Jun-feng. A New Method for Low Differential Gauge Pressure MeasurementBased on Piston Guage and Digital Pressure Gauge. Acta Metrologica Sinica, 2012, 33(6): 528-531.
［1］Gascoigne J. Precise pressure measurement in the range 0.1~500torr［J］. Vacuum, 1970, 17(1/2): 21-26.
［2］Kojima M, Kobata T, Saitou K, et al. Development of small differential pressure standard using double pressure balances［J］. Metrologia,2005, 42(6):227-230.
［3］Sutton C M, Fitzgerald M P, Jack D G. Conventional pressure balances as reference standards for pressures in the range 10Pa to 10kPa［J］. Metrologia, 1999, 36 (5):17-20.
［4］Sutton C M, The accurate generation of small gauge pressures using twin pressure balances［J］. Metrologia, 1987,23(4): 187-195.
［5］国家质量技术监督局. JJF 1059—1999,测量不确定度评定与表示［S］.1999.
2012, Vol. 33 
