Compensation of Dynamic Characteristics and Evaluation of Dynamic Uncertainty for a Measurement System Modeled by a Second-order Linear Time Invariant Model
HU Hong-bo,SUN Qiao#br#
National Institute of Metrology, Beijing 100013, China
Abstract：A novel method is proposed for the design of the system compensation filter. The compensation filter is directly designed according to the frequency response data obtained by dynamic calibration, which avoiding the process of system identification. The whole process is illustrated by the realistic simulation and proved that the method can improve the dynamic characteristics effectively and reduce dynamic error. Furthermore, the uncertainty of the whole measurement process including dynamic compensation and filter process is evaluated under frame of the GUM uncertainty, and finally the output of the compensated system and its uncertainty are obtained.
胡红波,孙桥. 二阶线性时不变测量系统动态特性的补偿与动态不确定度评估[J]. 计量学报, 2013, 34(2): 106-110.
HU Hong-bo,SUN Qiao. Compensation of Dynamic Characteristics and Evaluation of Dynamic Uncertainty for a Measurement System Modeled by a Second-order Linear Time Invariant Model. Acta Metrologica Sinica, 2013, 34(2): 106-110.
［1］ISO 2001 International Standard 16063-13 Methods for the calibration of vibration and shock transducers—Part 13: Primary shock calibration using laser interferometry［S］. 2001.
［2］ISO 1999 International Standard 16063-11 Methods for the calibration of vibration and shock transducers—Part 11: Primary vibration calibration by laser interferometry［S］. 1999.
［3］Hessling J P. Dynamic metrology-an approach to dynamic evaluation of linear time-invariant measurement systems［J］.Measurement Sci Technol, 2008, 19(8):1-7.
［4］Thomas Bruns, Afred Link, Franko Schmahling, et al.Calibration of accelerometers using parameter identification –Targeting a versatile new standard［R］. XIX IMERO World Congress, Fundamental and Applied Metrology,Lisbon, Portugal, 2009.
［5］黄俊钦.测试系统动力学［M］.北京:国防工业出版社,1996.
［6］徐科军.传感器动态特性的实用研究方法［M］.合肥:中国科学技术大学出版社,1999.
［7］徐科军,陶有军.机器人腕力传感器辨识建模与动态补偿［J］.计量学报,1994,15(2):403-408.
［8］孟晓风,黄俊钦.动态补偿滤波器的一种设计方法［J］.计量学报,1996,17(1):61-66.
［9］司瑞锋,常炳国,刘君华.基于BP神经网络的传感器特性补偿新算法的研究［J］.仪表技术与传感器,2000,(1):11-16.
［10］BIPM, IEC, IFCC, ISO, IUPAC, IUPAP,OIML. Guide to the Expression of Uncertainty in Measurement. International Organization for Standardization, Guide to the Expression of Uncertainty in Measurement［S］.1995.
［11］樊尚春.传感器技术及应用［M］. 北京:北京航空航天大学出版社,2004.
［12］Clemens E.Alfred L. Uncertainty evaluation for dynamic measurements modeled by a linear time-invariant system［J］.Metrologia, 2008,45(4):464-473.
［13］Hessling J P. A novel method of dynamic correction in the time domain［J］. Measurement Sci Technol, 2008,19(7):1-10.
［14］黄俊钦.动态不确定度的估算方法与应用实例［J］.计量学报,2005,26(4):372-375.
［15］Clemens Elster, Sascha Eichstadt, Alfred Link. Uncertainty evaluation of dynamic measurements in line with the GUM［C］//Proc of XIX IMKEO World Congress Fundamental and Applied Metrolgy. Lisbon, Portugal: 2009.
［16］胡广书.数字信号处理 理论、算法与实现(第二版)［M］. 北京:清华大学出版社,2003.
［17］Matlab with system identification Toolbox, Signal Processing toolbox ［EB/OL］. The Mathworks, Inc.
2013, Vol. 34 
