Abstract：A solution to circumferential closure is discussed when roundness is measured by a single probe for field.The frequency domain characteristics of the measured signal was analyzed by the Fourier transform to obtain the frequency components of the signal, and its effects of noise and drift on them were eliminated by filtering.A method based on correlation analysis was proposed to accurately obtain the measurement signal period, and the correctness and reliability of the method are verified by MATLAB simulation analysis.The periodic calculation error as the frequency and amplitude of the signal was obtained by changing the frequency and amplitude of the measured signal (i.e.the rotational speed and eccentricity of the roundness measurement) respectively.The results show that the period calculation error decreases with the increasing of frequency, that is, the higher the frequency is, the closer the period obtained by this method is to the actual period of the signal.However, when the frequency is a constant, the period calculation error value does not change significantly with the amplitude.
徐晓璇,康岩辉,裘祖荣,马爱文. 圆度测量中基于相关性分析的信号周期计算方法[J]. 计量学报, 2018, 39(6A): 49-.
XU Xiao-xuan,KANG Yan-hui,QIU Zu-rong,MA Ai-wen. A Method for Calculating Signal Period Based on Correlation Analysis in Roundness Measurement. Acta Metrologica Sinica, 2018, 39(6A): 49-.
［1］吴莉英. 现场用圆度测量系统研究［D］. 哈尔滨: 哈尔滨工业大学, 2007.
［2］申翠香, 张晓宇. 基于量子遗传算法的圆度误差测量研究［J］. 计量学报, 2018, 39(2): 242-245.
Shen C X, Zhang X Y. Detecting Roundness Error Based on Quantum Genetic Algorithm［J］. Acta Metrologica Sinica, 2018, 39(2): 242-245.
［3］许景波, 袁怡宝, 刘泊, 等. 圆度测量中高斯滤波的逼近实现方法［J］.计量学报, 2012, 33(1): 814-817.
Xu J B, Yuan Y B, Liu B, et al. Approximation Implementation Approach for Gaussian Filtering in Roundness Measurement［J］. Acta Metrologica Sinica, 2012, 33(1): 16-20.
［4］乔凌霄, 陈江宁, 陈文会, 等. 一种基于多步法的高精密主轴回转误差分离算法［J］. 计量学报, 2018, 39(1): 6-11.
Qiao L X, Chen J N, Chen W H, et al. A High-precision Spindle Error Separation Algorithm Based on Multi-step Process［J］. Acta Metrologica Sinica, 2018, 39(1): 6-11.
［5］刘庆民, 张蕾, 吴立群, 等. 基于机器视觉的非均匀分布点圆度误差评定［J］. 计量学报, 2016, 37(6): 567-570.
Liu Q M, Zhang L, Wu L Q, et al. Roundness error evaluation of non-uniformly distributed data point based on machine vision［J］. Acta Metrologica Sinica, 2016, 37(6): 567-570.
［6］洪迈生, 蔡萍. 多步法误差分离技术的比较分析［J］. 上海交通大学学报, 2004, 38(6): 877-881.
Hong M S, Cai P. Analysis and comparison of multi-step error separation technique［J］. Journal of Shanghai Jiaotong University, 2004, 38(6): 877-881.
［7］张国雄. 三坐标测量机的发展趋势［J］. 中国机械工程, 2000, 11(1): 231-235.
Zhang G X. The Development Tendency of Coordinate Measuring Machines［J］. China Mechanical Engineering, 2000, 11(1): 231-235.
［8］昌学年, 姚毅, 闫玲. 位移传感器的发展及研究［J］. 计量与测试技术, 2009, 36(9): 42-44.
Chang X N, Yao Y, Yan L. The development and investigation of displacement sensor［J］. Metrology & Measurement Technique, 2009, 36(9): 42-44.
［9］康岩辉, 张恒, 李颖仲, 等. 基于多电容传感大型主轴圆度的精密测量［J］. 计量学报, 2012, 33(6): 490-493.
Kang Y H, Zhang H, Li Y Z, et al. High Precision Roundness Measurement for Large Cylindrical Shaft Based on Multiple Capacitance Sensors［J］. Acta Metrologica Sinica, 2012, 33(6): 490-493. .
［10］任海燕, 曾立, 刘旭, 等. 基于全相位FFT的感应式磁力仪频谱校正方法研究［J］. 空间科学学报, 2016, 36(3): 366-372.
Ren H Y, Zeng L, Liu X. Research of Spectrum Correction Method Based on All Phase FFT for Induction Magnetometer ［J］. Chinese Journal of Space Science, 2016, 36(3): 366-372.
［11］吕振, 李晶, 张凤龙, 等. 基于加新型自卷积窗的频谱插值谐波分析方法［J］. 计算机应用与软件, 2015, (10): 123-126.
Lü Z, Li J, Zhang F L. Harmonic analysis method based on spectrum interpolation adding new self-convolution window［J］. Computer Applications and Software, 2015, (10): 123-126.
2018, Vol. 39 
