Abstract：Measurement model of air flow rate in burner vents are presented, according to conventional configuration of measuring instruments in thermal power plant. Resistance characteristics of air regulation dampers are automatically extracted from running data by mechanism modeling and data mining technology, and costs of laboratory calibration tests are saved. The discharge flow characteristics of air regulation dampers are measured in a practical boiler by experiments, and compared with curves extracted from the running data, they match very well. Air flow rate measurements in burner vents makes it possible to monitor air and fuel distribution in furnace, it facilitates burner control and optimization in low NOx pulverized-coal-fired boiler.
刘福国,张绪辉. 锅炉配风挡板过流特性的提取算法研究[J]. 计量学报, 2018, 39(5): 668-674.
LIU Fu-guo,ZHANG Xu-hui. Extraction Algorithm of Air Regulation Damper Discharge Characteristics in Boiler Based on Operational Data. Acta Metrologica Sinica, 2018, 39(5): 668-674.
［1］Díez L I, Cortés C, Pallarés J. Numerical investigation of NOx emissions from a tangentially-fired utility boiler under conventional and overfire air operation［J］. Fuel, 2008, 87(7):1259-1269.
［2］Choi C R, Chang N K. Numerical investigation on the flow, combustion and NOx, emission characteristics in a 500 MW e, tangentially fired pulverized-coal boiler［J］. Fuel, 2009, 88(9):1720-1731.
［3］Stupar G, Tucakovic' D, ivanoviac＇ T, et al. Assessing the impact of primary measures for NOx, reduction on the thermal power plant steam boiler［J］. Applied Thermal Engineering, 2015, 78(5):397-409.
［4］李少峰, 薛贵军, 孟宪举, 等. 高精度弯管流量计的理论研究和实验验证［J］. 计量学报, 2013, 34(2): 111-116.
［5］朱磊, 张志昌. 弯管流量计压强特性及流量系数的研究［J］. 计量学报, 2010, 31(2):131-135.
［6］陶晓磊, 赵晓东, 吴俊, 等. 基于调节阀的流量测量方法实验研究［J］.中国计量学院学报, 2014, 25(2): 144-149.
［7］刘福国, 刘科, 崔福兴, 等. 锅炉二次风挡板特性试验数据处理方法与应用［J］.热能动力工程, 2016,31(10): 115-130.
［8］董建, 崔辉, 刘福国. 炉膛风箱压力、风门开度和二次风速的关系研究［J］.山东电力技术,2009,17 (5):48-49.
［9］徐英, 杨会峰, 张涛. 内锥流量计可膨胀系数实验研究［J］. 计量学报, 2008, 29(5):457-460.
［10］徐英, 张立伟, 于磊, 等. 关键因素对内锥流量计压损的影响［J］. 仪器仪表学报, 2010,31(10): 2308-2311.
［11］Alam M M A, Setoguchi T, Matsuo S, et al. Nozzle geometry variations on the discharge coefficient［J］. Propulsion and Power Research,2016, 5(1):22–33.
［12］Huang S F, Taiyi Ma, Wang D, et al. Study on discharge coefficient of perforated orifices as a new kind of flowmeter［J］. Experimental Thermal and Fluid Science, 2013, 46(4):74–83.
［13］盛锴,刘复平,刘武林, 等. 汽轮机阀门流量特性对电力系统的影响及其控制策略［J］. 电力系统自动化, 2012, 36(7): 104-108.
［14］李劲柏, 刘复平. 汽轮机阀门流量特性函数优化和对机组安全性经济性的影响［J］. 中国电力, 2008, 41(12): 50-53.
［15］封卫忠. 基于差压法的飞机液冷系统冷却液流量测量［J］. 计量学报, 2014, 35(3): 348-251.
［16］崔宝玲, 马光飞, 王慧杰, 等. 阀芯结构对节流截止阀流阻特性和内部流动特性的影响［J］. 机械工程学报, 2015, 51(12): 178-184.
［17］范伟,林瑜阳,李钟慎. 基于BP神经网络的压电陶瓷蠕变预测［J］. 计量学报, 2017, 38(4): 429-434.
［18］Secco S D, Juan O, Louis-Louisy M, et al. Using a genetic algorithm and CFD to identify low NOx configurations in an industrial boiler［J］. Fuel, 2015, 158:672-683.
［19］Tan P, Xia J, Zhang C, et al. Modeling and reduction of NOx emissions for a 700 MW coal-fired boiler with the advanced machine learning method［J］. Energy, 2016, 94(1): 672–679.
［20］刘福国. 基于数据挖掘的钢球磨煤机运行特性建模和优化［J］. 煤炭学报, 2010, 35(5): 850-854.
［21］冯俊凯,沈幼庭. 锅炉原理与计算［M］. 北京:科学出版社,1992.
［22］孔珑.工程流体力学 ［M］.北京:中国电力出版社,2007:149-170.
［23］陈宝明, 李立人, 程智海, 等. W型锅炉二次供风系统档板开度的计算［J］. 动力工程, 2004, 24(5): 627-630.
2018, Vol. 39 
