Abstract：Effective emissivity of the conical blackbody cavity is calculated by Monte-Carlo method, the method is compared with the finite element method.The influence of some factor, such as the geometrical parameters, the emissivity of the material and the distance from the cavity, on the effective emissivity of the blackbody cavity is analyzed. It indicates that the results obtained by the two methods are essentially same, that is, the ratio of cavity length to cavity radius is 6, the opening radius to cavity radius is 0.5, the cone angle is greater than or equal to 90°, the material emissivity is greater than equal to 0.5, the distance from the detector to the cavity is 15 times as large as the cavity radius. At the same time, when all the conditions above are satisfied, the effective emissivity of the conical blackbody cavity is large.
沈久利,邢婷婷,吴飞. 基于Monte-Carlo法的圆锥形黑体腔有效发射率的研究[J]. 计量学报, 2018, 39(3): 359-362.
SHEN Jiu-li,XING Ting-ting,WU Fei. Research on the Effective Emissivity of Conical Blackbody Cavity Based on Monte-Carlo Method. Acta Metrologica Sinica, 2018, 39(3): 359-362.
［1］Fang Q Q, Fang W, Wang Y P, et al. New shape of blackbody cavity: conical generatrix with an inclined bottom［J］.Optical Engineering, 2012, 51(8):6401.
［2］李文军,孙坚,邹超,等.黑体空腔辐射理论和设计［J］.计量学报,2011,32(2):137-140.
［3］郑龙江,常蕾,吴飞,等.高温黑体空腔发射率有限元分析［J］.红外与激光工程,2011,40(9):1640-1645.
［4］孙富韬.Monte-Carlo方法在黑体空腔有效发射率计算中的应用［J］.宇航计测技术,2010,(2):26-29.
［5］黄燊彦,郝小鹏,王景辉,等.铯、钠热管标准黑体辐射源研制及性能评价［J］.计量学报,2014,35(2):120-124.
［6］原遵东,郝小鹏,王景辉,等.黑体辐射源的多波长有效亮度温度校准和不同溯源方式特点分析［J］. 计量学报,2017,38(2):135-140.
［7］谢植,高魁明.论黑体空腔多次反射理论和积分方程理论的统一性［J］.计量学报,1989,10(2):101-104.
［8］蔡璐璐.基于黑体腔特性的光纤高温测试技术及系统的研究［D］.秦皇岛:燕山大学,2012.
［9］蔡璐璐,田海霞,吴飞,等.高温黑体腔有效发射率的计算［J］.计量学报,2016,37(6):602-605.
［10］徐赛锋.高温黑体辐射源研究与设计［D］.南京:南京理工大学,2013.
［11］吴飞,董杰,田海霞,等.黑体腔高温传感器结构设计［J］.红外与激光工程,2015.44(9):2609-2614.
［12］吴飞,董杰,田海霞,等.基于有限元的黑体腔高温传感器动态特性分析［J］.传感器与微系统,2015,34(8):35-38.
［13］邢婷婷,沈久利,蔡璐璐.Monte-Carlo法的黑体腔高温传感器有效发射率研究［J］.传感器与微系统,2017,36(6):7-9.
2018, Vol. 39 
