Abstract：A length dimension measurement system for large hot forgings is designed. The images of each moment in the process of green laser scanning forgings are analyzed in this system. The dimension of the forging is measured according to the edge informations of forgings. First of all, the CCD camera and the green laser are driven by the motor, the real-time images of forgings and the positional information of laser line is acquired. Then whether the laser line locates on the edge of forgings is judged by image recognition. Secondly, the length dimension of forgings is obtained from recording the position information of both sides of the forging edges. The experimental results show that the maximum measurement error is less than 2 mm. So the method proposed can meet the needs of forging dimension measurement.
王颖,张玉存. 基于绿激光图像识别的热态大型锻件长度尺寸测量[J]. 计量学报, 2018, 39(3): 316-320.
WANG Ying,ZHANG Yu-cun. The Length Dimension Measurement for Large Hot Forgings Based on the Recognition of Green Laser. Acta Metrologica Sinica, 2018, 39(3): 316-320.
［1］Bokhabrine Y, Lew F C, Lew Y V, et al . 3D laser system for shell dimension measurement during forging［C］//International Forgemasters Meeting (IFM), Santander, Spain, 2008: 345-348.
［2］Bokhabrine Y, Lew F C, Lew Y V, et al. 3D reconstruction of hot metallic surfaces for industrial part characterization［J］. Image Processing: Machine Vision Applications, 2009, 725101-725107.
［3］Bokhabrine Y, Lew F C, Lew Y V, et al. 3D characterization of hot metallic shells during industrial forging［J］. Machine Vision and Applications, 2012, 23: 417-425.
［4］岡本陽, 和佐泰宏, 香川恭徳. 熱間大型鍛鋼品の形状計測装置の開発［J］. 神戸製鋼技報, 2007,57(3): 29-34.
［5］Gianfranco G, Pasquale A, Giorgio V, et al. 锻造中尺寸的控制: 2D和3D激光测量系统［J］. 锻造与冲压, 2010, 2010(S): 68-73.
［6］Fu X B, Liu B, Zhang Y C. Measurement technology of the hot-state size for heavy shell ring forging［J］. Int J of Adv Manuf Technol, 2013, 65(1-4):543-548.
［7］张玉存, 付献斌, 齐艳德, 等. 大型筒节热态锻件外径在线测量技术研究［J］. 计量学报, 2011, 32(5): 427-431.
［8］李群, 韩俊霞, 张玉存. 异形热态锻件几何尺寸测量方法的研究［J］. 计量学报, 2014, 35(2): 97-101.
［9］胡春海, 刘斌, 郑龙江. 基于双CCD的锻件尺寸测量的研究［J］. 红外与激光工程, 2008, 37(S1):11-14.
［10］刘卫亮. 基于结构光三维测量的大锻件图像处理算法的研究［D］. 上海:东华大学,2014.
2018, Vol. 39 
