Abstract：The channel power delay profile is measured using channel estimation techniques and therefore relative path attenuation of MIMO channel simulator is calibrated. The calibration system is traceable with the standard network which is made of delay line and attenuator. The experiment results show that the range of calibrating relative path attenuation is from 0 to -25 dB. At 500 MHz radio frequency and 300 ns relative path delay point, the expanded uncertainty of relative path attenuation is 0.35 dB(k=2).
［1］王婷婷. MIMO无线信道参数估计与信道建模研究［D］. 北京:北京邮电大学,2012.
［2］乔越峰. TD-LTE系统信道估计技术方案研究［D］. 成都:西南交通大学,2012.
［3］赵海宁,侯立新,卞昕,等. MIMO信道相对路径延时校准技术的研究［J］. 计量学报,2017,38（3）:362-366.
［4］Morelli M,Mengail U. A comparison of pilot-aided channel estimation methods for OFDM systems［J］. IEEE Trans on Signal Process,2001, 49（12）:3065-3073.
［5］未元. 宽带SISO_MIMO_OFDM系统信道参数估计研究［D］. 南京:南京理工大学,2014.
［6］ETSI TS 136 211 V12.6.0. Evolved Universal Terrestrial Radio Access (EUTR-A); Physical channels and modulation(3GPP TS 36.211)［S］. 2015.
［7］van de Beek J J, Edfors O, Sandell M, et al. On channel estimation in OFDMA systems［J］. Proc IEEE VTC-Spring,1995, 2: 815-819
［8］冯新善.高频、微波功率的计量测试［M］.北京:中国计量出版社,1987.
［9］吕品,高飞,崔孝海. 基于“数据驱动计量”的通用微波小功率自动计量系统［J］. 计量学报,2007,28（1）:77-80.
2017, Vol. 38 
