Abstract：A new method of fast edge generation based on step-recovery diode circuits is developed.A few schottky barrier diodes are used to segregate the DC offset circuit from the pulse source and the loader.The inductance is placed in the DC offset circuit to shield the RF signal,and a resistance is added to absorb the signal reflection from the rearward to optimize the fast edge waveform.The standardization of the fast edge signal is depended on the veracity of the offset current and the amplitude of the input pulse. At last a fast edge circuit for the calibration of 1GHz bandwidth oscilloscope is designed and achieves a fast edge with 80ps rise time,by which the feasibility of the new method is proved.
付在明,王厚军,黄建国. 一种用于示波器校准的快沿信号产生方法[J]. 计量学报, 2011, 32(5): 459-462.
FU Zai-ming,WANG Hou-jun,HUANG Jian-guo. A Method of the Fast Edge Signal Generation for Oscilloscope Calibration. Acta Metrologica Sinica, 2011, 32(5): 459-462.
［1］郭允晟.脉冲参数与时域测量技术［M］.北京:中国计量出版社,1989.
［2］Afshari E,Hajimiri A.Nonlinear Transmission Lines for Pulse Shaping in Silicon［J］.Solid-State Circuits,2005,40（3）:744-752.
［3］Salameh D,Linton D.Study of the Effect of Various Parameters on Nonlinear Transmission-Line（NLTL）Performance［J］.IEEE Transactions on Microwave Theory and Techniques,1999,47（3）:350-353.
［4］赵科佳,刘明亮,郁月华,等.宽带示波器上升时间与带宽的转换关系的研究［J］.计量学报,2006,27（2）:160-163.
［5］郭伟民,邓晓莉,李莉.关于数字示波器上升时间的探讨［J］.宇航测试技术,2003,23（5）:31-39.
［6］Fu Z M,Shi Y B.Research on a Fast Edge Generaion Technology of the Digital Pulse［C］//International Conference on Communications,Circuits and Systems.Xiamen,China,2008.
［7］吴亚铭,师奕兵,付在明.一种快速沿整形电路的设计与实现［J］.测控技术,2008,27（11）:80-85.
［8］周建明,高晓薇,陈宁.一种基于SRD和NLTL的皮秒级脉冲产生电路［J］.固体电子学研究与进展,2007,27（1）:40-43.
［9］付在明,师奕兵,王志刚.一种可控高速脉冲波形合成技术研究［J］.仪器仪表学报,2007,28（5）:934-937.
［10］付在明,师奕兵,王厚军.数字合成高速脉冲的一种非线性调理技术［J］.电子测量与仪器学报,2008,22（4）:74-78.
2011, Vol. 32 
