Abstract：The mechanism between the automotive load and tire pressure is studied. By measuring the changes of tire pressure of the vehicle, the automotive load can be acquired indirectly. The model of the automotive load and force are analyzed, the effectiveness and practicality of the model are verified by the measurement experiments and error analysis. A novel and portable digital weighing instrument of vehicle load is designed based on the proposed measuring method. This apparatus is mainly composited of a pressure transmitter and a portable display terminal. The tests illustrate that this weighing apparatus feature in higher accuracy, low cost, and small size. It can be applied to the car-load measurement of vehicles in various types of tire.
骆光照,黄立梅,石伟,杨峰. 基于胎压的静态载重测量技术研究[J]. 计量学报, 2011, 32(4): 333-337.
LUO Guang-zhao,HUANG Li-mei,SHI Wei,YANG Feng. Study on Measurement of Static Automotive Load based on Tire Pressure. Acta Metrologica Sinica, 2011, 32(4): 333-337.
［1］Takaji U, Katsuhiro A, Hideki O, et al. Observer based estimation of parameter variations and its application to tire pressure diagnosis［J］.Control Engineering Practice,2001,9(6):639-645.
［2］Ohashi H,Yonetani M,Kojian M, et al. Tire pressuremonitor system using rotational speed signal from wheel speed sensor or ABS system［J］. Toyota Technical Review,1997.47:89-94.
［3］姚钟尧,丁剑平,林惠音.轮胎气压-负荷-下沉量之间的关系［J］.特种橡胶制品,1999,20(5):53-55.
［4］梁俐,刘锟,李炜,等.全钢载重子午线轮胎钢丝圈受力分析［J］.轮胎工业,2004,24(10):594-597.
［5］庄继德.汽车轮胎学［M］ .北京:北京理工大学出版社,1995.
［6］胡小弟,孙立军. 重型货车轮胎接地压力分布实测［J］.同济大学学报,2005,33(11):1443-1448.
［7］C8051F350/1/2/3混合信号ISP FLASH微控制器［Z］ .Silicon Laboratories,2005.
［8］周道武,杨智春.便携式动态轮(轴)重仪称量误差分析［J］.测量与设备,2002,(4):22-25.
［9］刘正士,王勇,陈恩伟,等.传感器建模误差对其动态性能补偿效果影响的定量分析［J］.计量学报,2006,27(3):250-253.
［10］谢先海,管迪华.胎侧刚度非线性的分析及其对轮胎模型的修改［J］.中国机械工程,2004, 15(14) :1302-1305.
2011, Vol. 32 
