Abstract：The steady state heat conduction model of high temperature pipeline is established and calculated by the finite volume method. The relationship between the surface temperature distribution of the pipe and the flow rate and temperature is studied based on Levenberg-Marquardt algorithm. The effect of random measurement error on the results is studied by numerical simulation. The effectiveness of the proposed algorithm is proved and the method to reduce effect of the random error on identification results is discussed.
王烨,杨立. 高温管道内流体流量及温度识别研究[J]. 计量学报, 2017, 38(4): 477-480.
WANG Ye,YANG Li. Research on Identification of Flow Rate and Temperature in the High Temperature Pipeline. Acta Metrologica Sinica, 2017, 38(4): 477-480.
［1］徐科军,王沁,方敏,等. 基于噪声模板与互相关计算的涡街流量计抗强振动方法［J］.计量学报, 2015,36(1):37-42.
［2］杨昆. 基于红外测温的管道内部温度和流量识别及其应用研究［D］.武汉: 海军工程大学动力工程学院, 2013.
［3］沈平平,赵伟国. 多传感器热式气体流量计的研制［J］.计量学报, 2016,37(6):619-622.
［4］韩雯雯, 卢涛. 基于共轭梯度法的圆管内部流体温度识别［J］.工程热物理学报, 2015,36(2):371-375.
［5］范春利, 孙丰瑞, 杨立. 基于红外测温的圆管内壁不规则边界的识别算法研究［J］.热科学与技术, 2006,5(2):112-117.
［6］FAN C L, SUN F R, YANG L. An algorithm study on inverse identification of interfacial configuration in a multiple region domain［J］.Journal of Heat Transfer, 2009,131(2):21301.
［7］吴洪潭, 崔志尚, 许祝安. 一种基于反问题算法的管道壁面热流密度测量技术［J］.计量学报, 2007,28(3):237-238, 287.
［8］张玉存, 周珊, 魏斌, 等. 传热管道设备的内壁状态监测方法［J］.计量学报, 2015,36(1):31-36.
［9］FAN C L, SUN F R, YANG L. An algorithm study on identification of subsurface defect based on thermographic temperature measurement［J］.Journal of Engineering Thermophysics, 2007,28(2):304-306.
［10］吕事桂, 杨立, 范春利, 等. 采用混沌-LM混合解法的材料缺陷单面红外检测定量辨识［J］.红外与激光工程, 2013,42(2):317-323.
［11］Ozisik M N. Inverse heat transfer: fundamentals and applications［M］.Boca Raton, Fiorida:CRC Press, 2000.
2017, Vol. 38 
