To avoid repetitive position error between the machining and the detection, an on-machine verification (OMV) system for complex spatial profile is researched.By applying touch trigger probe system to five-axis machining center and analyzing the corresponding kinematic model of OMV system, the post process program has been made out.In consideration of the efficiency and effectiveness of the algorithm, the traditional traveling salesman problem is treated as an optimal matching problem for partial quick solution, and an overall optimal measurement path can be achieved subsequently.Meanwhile, a method is proposed to check the interference during the detection, and means of graphics intersection is adopted to avoid incorrect collisions in advance.An OMV process of surface on “S” specimen has been implemented and the obtained deviation is compared with another set of data measured on a coordinate measuring machine.It is found that the former reduces the coefficient of variation by 7.3% relative to the latter under the overall consistency condition.
［2］Huang N, Bi Q, Wang Y, et al. 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement［J/OL］. http://www.sciencedirect. com/science/article/pii/S0890695514000571, 2014-04-18.
［3］Ibaraki S, Iritani T, Matsushita T. Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe［J/OL］. http://www.sciencedirect.com/science/article/pii/S0890695512000429, 2012-03-21.
［4］Obeidat S M, Raman S.An intelligent sampling method for inspecting free-form surfaces［J］.The International Journal of Advanced Manufacturing Technology, 2009, 40(11-12): 1125-1136.
［8］Cho M W, Kim G H, Seo T I, et al. Integrated machining error compensation method using OMM data and modified PNN algorithm［J］.International Journal of Machine Tools and Manufacture, 2006, 46(12): 1417-1427.
［9］Chen F J, Yin S H, Ohmori H, et al. Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement［J］. International Journal of Machine Tools and Manufacture, 2010, 50(5): 480-486.
［14］杜丽, 崔浪浪, 赵波, 等.基于 S 型检验试件的数控机床动态性能辨识新方法［J］.制造技术与机床, 2012(12): 152-156.
［15］Wen X, Zhao Y, Wang D, et al. Accurate evaluation of free-form surface profile error based on quasi particle swarm optimization algorithm and surface subdivision［J］.Chinese Journal of Mechanical Engineering, 2013, 26(2): 406-413.
2015, Vol. 36 
