Abstract：A capacity calibration method of underground water-sealed storage in rock caverns using total station was proposed, which arranged traverse surveying of each part of the cavern, formed a unified coordinate system, and the capacity table and curves of the cave are finally obtained by data acquisition and data fitted of the cavern. By establishing the measurement model and analyzing the uncertainty components, the uncertainty of the calibration method meeted the technical requirements of relevant specifications. The results showed that the relative expanded uncertainty was 4‰, when coverage factor k=2, confidence probability P=95%.
［1］GB 50996-2014, 地下水封石洞油库施工及验收规范［S］. 2014.
［2］吕宏权, 刘斌, 何文浩, 等. 地下水封洞库的库容测量方法: CN103344297A ［P］. 2013-10-09.
［3］张洪军, 严可馨, 赵晓东, 等. 一种基于三维激光扫描仪的大型洞库容量测量方法: CN108168429A ［P］. 2018-06-15.
［4］潘正风, 程效军, 成枢, 等. 数字测图原理与方法［M］. 武汉: 武汉大学出版社, 2009.
［5］李巍, 赵亮, 张占伟, 等. 常用全站仪放样方法及精度分析［J］. 测绘通报, 2012, 5(5): 29-33.
Li W, Zhao L, Zhang Z W, et al. Commonly Used Methods for Electronic Total Station Layout and Its Precision Analysis［J］. Bulletin of Surveying and Mapping, 2012, 5(5): 29-33.
［6］陈岚峰, 杨静瑜, 崔崧, 等. 基于MATLAB的最小二乘曲线拟合仿真研究［J］. 沈阳师范大学学报(自然科学版), 2014, 32(1): 75-79.
Chen L F, Yang J Y, Cui S, et al. MATLAB simulation of curve fitting based on least-squares［J］. Journal of Shenyang Normal University(Natural SciencEdition), 2014, 32(1): 75-79.
［7］刘书桂, 李蓬, 那永林. 基于最小二乘原理的平面任意位置椭圆的评价［J］. 计量学报, 2002, 23(4): 245-247.
Liu S G, Li P, Na Y L. Evaluation of the Form Error of Ellipse Based on Least Square Method［J］. Acta Metrologica Sinica, 2002, 23(4): 245-247.
［8］詹玉枝, 梁成斌, 张庆芳. 基于迭代学习控制的二阶延迟微分系统研究［J］. 计量学报, 2020, 41(3): 374-378.
Zhan Y Z, Liang C B, Zhang Q F. Research on 2-order Time-delay Systems Based on Iterative Learning Control［J］. Acta Metrologica Sinica, 2020, 41(3): 374-378.
［9］ISO 7507-4: 2010 Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 4: Internal electro-optical distance-ranging method［S］. 2010.
［10］曾庆伟. 全站仪中间法三角高程测量精度分析及应用研究［J］. 测绘与空间地理信息, 2020, 43(3): 22-25.
Zeng Q W. Accuracy Analysis and Application of Trigonometric Leveling Using Total Station Intermediate Method［J］. Geomatics & Spatial Information Technology , 2020, 43(3): 22-25.
［11］赵伟强, 刘慧, 刘建. 380～780nm总光谱辐射通量量值导出及不确定度评定［J］. 计量学报, 2018, 39(1): 24-27.
Zhao W Q, Liu H, Liu J. The Realization of 380～780nm Total Spectral Radiant Flux and the Measurement Uncertainty Evaluation［J］. Acta Metrologica Sinica, 2018, 39(1): 24-27.
［12］刘园园, 杨健, 赵希勇, 等. GUM法和MCM法评定测量不确定度对比分析［J］. 计量学报, 2018, 39(1): 135-139.
Liu Y Y, Yang J, Zhao X Y, et al. Comparative Analysis of Uncertainty Measurement Evaluation with GUM and MCM［J］. Acta Metrologica Sinica, 2018, 39(1): 135-139.
［13］李新颖, 刘凯, 黄海燕. 多线函数法在曲线拟合中的应用研究［J］. 计量学报, 2018, 39(5): 716-719.
Li X Y, Liu K, Huang H Y. Application of Multi-line Function Method in Curve Fitting［J］. Acta Metrologica Sinica, 2018, 39(5): 716-719.
［14］魏明明. 自适应MCM的波动性指标收敛趋势分析［J］. 计量学报, 2019, 40(3): 530-537.
Wei M M. Analysis of Convergence Trend of Adaptive MCM Volatility Index［J］. Acta Metrologica Sinica, 2019, 40(3): 530-537.
［15］GB 50455-2008 地下水封石洞油库设计规范［S］. 2008.
2021, Vol. 42 
