基于机器人技术的手持式数字万用表全自动校准系统开发

doi:10.3969/j.issn.1000-1158.2019.6A.014

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (771 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要基于机械臂、机器视觉设计了一套手持式数字万用表全自动校准系统。阐述了系统的组成,开发了自动测试程序、机械臂的运动控制系统及机器视觉识别系统。该系统解决了无法进行程控通信的仪器设备或者是劳动强度大、重复性高、危险系数高的设备校准问题。最近通过实验测试结果验证,该系统完全符合相关国家规范使用要求,且具有测试效率高、稳定性强等优点,可将人工使用成本降低至原工作模式的30%。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	彭诚
	丁蔚
	侯旭玮

关键词 ：计量学, 自动校准, 机械臂, 机器视觉, 数字万用表

Abstract：To design an automatic calibration of the hand-held digital multimeter (DMM), which based on mechanical arm and machine vision. This paper describes the composition of the system, develops the automatic test program, the motion control system of the manipulator and the machine vision recognition system. This system can solve the problem of equipment calibration which can not be used for program-controlled communication or equipment calibration with high labor intensity, high repeatability and high risk. Recently, it has been verified by experimental test results that the system fully meets the requirements of relevant national standards, and has the advantages of high test efficiency and strong stability, which can reduce the labor cost to 30% of the original working mode.

Key words： metrology automatic calibration mechanical arm machine vision digital multimeter

收稿日期: 2019-10-16

PACS:

TB971

作者简介: 彭诚（1985-), 男, 北京人, 北京东方计量测试研究所工程师, 主要从事电磁学计量方面的工作。Email: 314729653@qq.com

引用本文:

彭诚, 丁蔚, 侯旭玮. 基于机器人技术的手持式数字万用表全自动校准系统开发[J]. 计量学报, 2019, 40(6A): 64-68.
PENG Cheng, DING Wei, HOU Xu-wei. Development of Automatic Test System for Hand-held Digital Multimeter Based on Robotics. Acta Metrologica Sinica, 2019, 40(6A): 64-68.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2019.6A.014 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2019/V40/I6A/64

1 山东社会科学院新工业化发展战略研究课题组. 2050中国新工业化信息发展战略研究［J］. 济南大学学报(社会科学版), 2018, 28(6): 41-45, 157. Research Group on New Industrialization Development Strategy of Shandong Academy of Social Sciences. 2050 China’s New Industrialization Information Development Strategy ［J］. Journal of University of Jinan (Social Science Edition), 2016, 37(5): 472-475.
2 CastiglioneConcetta. Technical efficiency and ICT investment in Italian manufacturing firms ［J］. Applied Economics, 2012, 44( 14): 1749-1763.
3 肖德, 侯佳宁. 中国制造业升级动能转换的路径研究［J］. 理论探讨, 2019, (1): 88-95. XiaoD, HouJ N. Research on the Path of Driving Force Conversion of Manufacturing Industry Upgrade in China ［J］. Theoretical Investigation, 2019, (1): 88-95.
4 TregennaF. Manufacturing Productivity, Deindustrialization, and Reindustrialization ［R］. World Institute for Development Economics Research Working Paper, 2011.
5 唐少清, 周小柯, 姜鹏飞, 等. 再工业化与中国制造业结构优化与创新发展研究［J］. 中囯软科学(增刊), 2018: 380-389. TangS Q, ZhouX K, JiangP F, et al.The Research of Structure Optimization and Innovation Development Between New Industrialization and Chinese Manufacturing Industry［J］. China Soft Science, 2018: 380-389.
6 通用电器公司（GE）. 工业互联网: 打破智慧与机器的边界［M］. 北京: 机械工业出版社, 2015: 1-10.
7 鞠平, 周孝信, 陈维江, 等. “智能电网+”研究综述［J］. 电力自动化设备, 2018, 38(5): 2-11. JuP, ZhouX X, ChenW J, et al. “Smart Grid Plus”research overview ［J］. Electric Power Automation Equipment, 2018, 38(5): 2-11.
8 尤海鹏, 高运征. 数字万用表自动计量系统的设计与实现［J］. 计量技术, 2018, (9): 33-35. YouH P, GaoY Z. Design and implementation of automatic measurement system of digital multimete ［J］. Measurement Technique. 2018, (9): 33-35.
9 王威. 数字万用表远程校准系统的研究［D］. 杭州: 中国计量大学, 2017: 10-15.
10 黄丰磊, 阮伟鹏. 基于NI vision assiant 万用表数字识别系统设计［J］. 工业计量, 2016, (S2): 8-10. HuangF L, RuanW P. Design of Multimeter Digital Recognition System Be based on NI vision assiant ［J］. Industrial Metrology, 2016, (S2): 54-44.
11 贾昊, 张烨, 崔忠政, 等. 基于NI Vision 机器视觉技术的应用［J］. 设计与研发, 2018, 21: 28-29. JiaH, ZhangY, CuiZ Z, et al.Application of machine vision technology based on Ni vision ［J］. Design and Development, 2018, (21): 28-29.
12 国家质量监督检验总局. JJF 1587—2016 数字多用表校准规范［S］. 2016.
13 黄俊玲. 西门子S7-1200 PLC程序设计方法研究［J］. 工业控制计算机, 2016, (10): 142-143. HuangJ L. Study of Program Design Method Based on Siemens S7-1200 PLC ［J］. Industrial Control Computer, 2016, 29,(10): 142-143.