1. College of Mechanical and Electrical, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. Henan Institute of Product Quality Supervision and Inspection, Zhengzhou, Henan 450000, China
3. Engineering Training Centre, China Jiliang University, Hangzhou, Zhejiang 310018, China
Abstract：In view of the current manual measurement of cable indentation is slow and affected by the human operation greatly, a device for automatically measuring the indentation depth of the cable and software are designed. The device sends commands to the motion control board through software to drive the motor to realize the movement control of a two-dimensional platform which is equipped with a fixture for fixing cable; At the same time, the laser sensor acquires data to obtain a data set; The set is subjected to a moving average filter process, using a differential method for the processed data set to determine if there is an indentation; Linear regression is performed on non indentation data, the indentation depth is obtained by subtracting the indentation data.The sources of the uncertainty introduced in the measurement calculation process are analyzed, and the uncertainty of the measurement results of a cable sample is evaluated, taking k=2, the expanded uncertainty U=0.028mm.
［1］GB/T 2951. 31-2008 电缆和光缆绝缘和护套材料通用试验方法第31部分: 聚氯乙烯混合料专用试验方法——高温压力试验——抗开裂试验［S］.2008.
［2］IEC 60811-508: 2012 Electric and optical fibre cables—Test methods for non-metallic materials—Part 508: Mechanical tests—Pressure test at high temperature for insulationand sheaths［S］.2012.
［3］黄斯平. 高温压力试验方法研究［J］. 福建质量管理, 2016, (1): 129-132.
Huang S P. Research on high temperature pressure experimental method［J］. Science and technology and quality, 2016, (1): 129-132.
［4］季伟, 刘晓晖, 刘皓. 电线电缆绝缘高温压力试验测试结果的不确定度评定［J］. 检验检疫学刊, 2017, 27(2): 14-17.
Ji W, Liu X H, Liu H. Uncertainty Evaluation for the Results of Pressure Test at High Temperature of Cable Insulation［J］. Journal of Inspection and Quarantine, 2017, 27(2): 14-17.
［5］杨梦放, 陈磊, 张登伟, 等. 基于激光测量的高速非接触角度检测技术研究［J］. 激光与红外, 2017, 47(5): 595-599.
Yang M F, Chen L, Zhang D W, et al. Research on high-speed and non-contact angle detection based on laser measurement［J］. Laser & Infrared, 2017, 47(5): 595-599.
［6］Lee K C, Yang J S, Yu H H. Development and evaluation of a petal thickness measuring device based on the dual laser triangulation method［J］. Computers and Electronics in Agriculture, 2013, 99(9): 85-92.
［7］文常保, 高丽红, 方吉善, 等. 基于改进型限幅平均滤波法的高精度称重系统研究［J］. 传感技术学报, 2014, 27(5): 649-653.
Wen C B, Gao L H, Fang J Y, et al. The High-Precision Weighing System Based on the ImprovedAmplitude-Limiting and Average Filtering Algorithm［J］. Chinese Journal of Sensors and Actuators, 2014, 27(5): 649-653.
［8］袁勇, 张固澜. 一种改进的中值滤波方法［J］. 成都理工大学学报(自然科学版), 2013, 40(2): 125-129.
Yuan Y, Zhang G L. An improved median filter method［J］. Journal of Chengdu University of Technology(Science & Technology Edition), 2013, 40(2): 125-129.
［9］Calisto A, Galeano M, Bramanti A, et al. Analysis of intracranial pressure recordings: comparison of PCA and signal averaging based filtering methods and signal period estimation［C］//2010 Annual International Conference of the IEEE Engineering in Medicine and Biology, Buenos Aires, Argentina,2010.
［10］ISO/IEC: Uncertainty of measurement —Part 3: Guide to the expression of uncertainty in measurement［S］. 2008.
［11］陈仁杰, 黄婷婷, 吕良勇, 等. ICP-MS测定陶瓷片密封水嘴浸泡液中镉含量的不确定度分析［J］. 计量学报, 2018, 39(6): 914-917.
Chen R J, Huang T T, Lv L Y, et al. Evaluation of Uncertainty in Measurement of Cadmium in Immersion Solution of Ceramic Cartridge Faucets by ICP-MS［J］. Acta Metrologica Sinica, 2018, 39(6): 914-917.
［12］陈凌峰. 标准不确定度A类评定中极差法的深入讨论［J］. 计量学报, 2019, 40(2): 347-352.
Chen L F. The Further Discussion of the Range Method in the Type A Evaluation of Standard Uncertainty［J］. Acta Metrologica Sinica, 2019, 40(2): 347-352.
［13］国家质量监督检验检疫总局.JJF 1059. 1-2012 测量不确定度评定与表示［S］. 2012.
［14］叶颖谦, 任国营, 李伟仙, 等. 基于真空环境的位移传感器校准系统精度研究［J］. 计量学报, 2018, 39(6A): 62-65.
Ye Y Q, Ren G Y, Li W X, et al. Accuracy Study on the Calibration System of Displacement Sensurs in Vacuum Eviroment［J］. Acta Metrologica Sinica, 2018, 39(6A): 62-65.
［15］邵建新, 刘云虎, 张子英. 测量结果及其不确定度有效位数确定问题［J］. 计量学报, 2013, 34(3): 300-304.
Shao J X, Liu Y H, Zhang Z Y. The Determination of the Significant Figures of the Measurement Result and its Uncertainty［J］. Acta Metrologica Sinica, 2013, 34(3): 300-304.
2020, Vol. 41 
