基于机器视觉的水表小流量检定方法研究

doi:10.3969/j.issn.1000-1158.2021.09.08

摘要
图/表
参考文献(13)
相关文章 (15)

全文: PDF (1139 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对目前水表小流量检定时间长,人工读数不准确等原因,提出了一种基于机器视觉的水表小流量检定方法。通过工业相机以自适应的采样频率采集水表梅花转子图像,利用图像叠加原理,以检定开始时转子图像为背景,相机后续获取每一帧图像在此背景上作叠加处理。根据转子转动过程中图像叠加后的明暗占比大小的变化规律对其转动齿数进行计数,用双计时法通过脉冲当量得到水表指示体积。利用液体流量标准装置,对水表进行检定,采用静态质量法,通过称重箱获取标准体积,计算水表误差。根据实验结果,在小流量检定时,该方法在缩短检定时间、减少用水量后可得到与人工读数法一致的结果,可解决气泡带来的读数干扰,并能有效提高检定效率。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	林柯楠
	庄园
	黄咏梅

关键词 ：计量学, 水表检定, 机器视觉, 小流量, 梅花转子

Abstract：In the view of the current water meter small flow verification time is long,the manual reading is not accurate and other reasons, a verification method of water meter in small flow based on machine vision is proposed. The plum blossom rotor image of water meter is acquired by industrial camera with adaptive sampling frequency. According to the theory of image overlap, the image of the rotor at the beginning of the verification is used as the background, and the subsequent images overlap on this background. During the rotation of the rotor, the number of rotating teeth is counted from the periodic changing of the percent of white and black areas in the overlap image. The indicated volume of the water meter is obtained by the pulse equivalent with the double-time method. Liquid flow standard device is used to calibrate water meter with the actual volume got by the weighing tank through static mass method. The error of water meter can be calculated. The experimental results manifest that the result obtained by this verification method is consistent to the manual reading with shorten verification time and less water in small flow. The method can solve the reading interference from bubbles, and the verification efficiency can be improved.

Key words： metrology water meter verification machine vision small flow plum blossom rotor

收稿日期: 2020-01-15 发布日期: 2021-09-24

PACS:

TB937

通讯作者: 黄咏梅(1967-),浙江杭州人,中国计量大学教授,博士,主要从事流量检测技术方面的研究。Email: ymhuang@cjlu.edu.cn E-mail: ymhuang@cjlu.edu.cn

作者简介: 林柯楠(1995-),浙江台州人,中国计量大学在读硕士研究生, 主要研究方向为流量检测技术。Email: 782430459@qq. com

引用本文:

林柯楠,庄园,黄咏梅. 基于机器视觉的水表小流量检定方法研究[J]. 计量学报, 2021, 42(9): 1167-1171.
LIN Ke-nan,ZHUANG Yuan,HUANG Yong-mei. Research on Small Flow Verification Method of Water Meter Based on Machine Vision. Acta Metrologica Sinica, 2021, 42(9): 1167-1171.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.09.08 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I9/1167

［1］汤思孟, 赵杰煜, 陆晓峰. 基于机器视觉技术的水表新型检定方法［J］. 计量学报, 2015, 36 (1): 54-57.
Tang S M, Zhao J Y, Lu X F. A Novel Water meter Calibration Method Based on Machine Vision Technology ［J］. Acta Metrologica Sinica, 2015, 36 (1): 54-57.
［2］郑文学, 岳智珉, 唐旭晟. 基于机器视觉的水表检定方法研究［J］. 机电工程, 2019, 36 (3): 271-274.
Zheng W X, Yue Z M, Tang X S. Calibration Method of Water Meter Based on Machine Vision ［J］. Journal of Mechanical & Electrical Engineering, 2019, 36 (3): 271-274.
［3］Chang O, Pruna E, Pilatasig M, et al. Calibration of Residential Water Meters by Using Computer Vision ［C］// Electrical, Electronics Engineering, Information & Communication Technologies, IEEE, 2016: 351-356.
［4］王高登, 钟俊. 基于改进的Hough变换的指针识别算法［J］. 现代电子技术, 2016, 39 (16): 23-26.
Wang G D, Zhong J. Pointer Recognition Algorithm Based on Improved Hough Transform ［J］. Modern Electronics Technique, 2016, 39 (16): 23-26.
［5］祁建, 张燕. 基于多特征信息的水表指针自动识别方法［J］. 计算机与数字工程, 2015, 43 (4): 676-679.
Qi J, Zhang Y. Automatic Recognition Method for Water-Meter Pointer Based on Multi-characteristic Information［J］. Computer & Digital Engineering, 2015, 43 (4): 676-679.
［6］李杰, 吕丹, 林军, 等. 基于单指针识别的全自动水表检定装置［J］. 计量与测试技术, 2014, 41 (2): 7-8, 10.
Li J, Lü D, Lin J, et al. Automati Water Meter Cali-bration Device Based on Single Pointer Pointer Identification［J］. Metrology & Measurement Technique, 2014, 41 (2): 7-8, 10.
［7］王三武, 戴亚文. 多指针水表自动识别系统［J］. 仪器仪表学报, 2005, 26 (11): 1178-1180, 1187.
Wang S W, Dai Y W. Automatic Recognizing of Multi-pointers Water Meter Using Image Processing ［J］. Chinese Journal of Scientific Instrument, 2005, 26 (11): 1178-1180, 1187.
［8］孔明, 王欢, 郭天太, 等. 基于ZigBee的水表检定系统开发［J］. 机床与液压, 2015, 43 (2): 148-151.
Kong M, Wang H, Guo T T, et al. Development of Watermeter Detection System Based on ZigBee ［J］. Machine Tool & Hydraulics, 2015, 43 (2): 148-151.
［9］Yan G, Sun J, Lu T. Research on Monocular Vision Positioning Technology Used in Water Meter Verification ［C］// International Conference on Mechanical, Control and Computer Engineering. IEEE, 2018: 60-64.
［10］陈硕, 刘丰, 唐旭晟, 等. 基于机器视觉技术的水表在线检定系统研究［J］. 计量学报, 2017, 38 (4): 473-476.
Chen S, Liu F, Tang X S, et al. Research on On-line Water-meter Verification System Based on Computer Vision Technology ［J］. Acta Metrologica Sinica, 2017, 38 (4): 473-476.
［11］邢雪亮, 甘文波, 蒋朝根. 基于机器视觉的航空铆钉尺寸检测技术［J］. 计量学报, 2020, 41(5): 518-523.
Xing X L, Gan W B, Jiang C G. Technology of Size Detection of Air Rivets Based on Machine Vision［J］. Acta Metrologica Sinica, 2020, 41(5): 518-523.
［12］韩伟, 沈昱明. 双计时脉冲插值计数器的设计和实验［J］. 计量学报, 2014, 35 (6A): 130-134.
Han W, Shen Y M. Design and Experiment of Counter Based on Doubletiming Pulse Interpolation Method ［J］. Acta Metrologica Sinica, 2014, 35 (6A): 130-134.
［13］JJG 162—2009 饮用冷水水表检定规程［S］. 2009.