DC High Current On-Line Calibration Devicebased on Digital Image Recognition and Optical Fiber Sensor
MEI Guo-jian1,2,WANG Jia-fu3,LI Chuan-sheng3,LIN Fei-peng3,DONG Ping4,SHAO Hai-ming3,CAI Jin-hui1
1. China Jiliang University, Hangzhou, Zhejiang 310018, China
2.Zhejiang Institute of Metrology,Hangzhou,Zhejiang 310018,China
3. National Institute of Metrology, Beijing 100029, China
4. Shanxi Institute of Metrology, Taiyuan, Shanxi 030021,China
Abstract：In the field of electrolytic metallurgy and electrochemical industry, a large number of Hall DC high current sensor have no reservation calibration interface. Aimed at the practical problem, a DC large current online calibration device based on digital image recognition and fiber current sensor was designed. The system used the optical-fiber current sensor as the standard and collects the display image of the Hall current sensor secondary display instrument in real time by the image sensor. Besides, it performed some pre-processors, such as grayscale, median filtering,binarization, closing operation, character segmentation, etc. on the collected image. By adopting the threading method for image recognition, the sampling value of the Hall current sensor was obtained. Then, after compared with the standard measurement value of the fiber-optic current sensor in real time, the measurement error of the controlled Hall current sensor was calculated. The results of field calibration experiments verified the feasibility of the calibration method and device.
梅国健,王家福,李传生,林飞鹏,董平,邵海明,蔡晋辉. 基于数字图像识别和光纤传感器的直流大电流在线校准装置[J]. 计量学报, 2021, 42(5): 623-628.
MEI Guo-jian,WANG Jia-fu,LI Chuan-sheng,LIN Fei-peng,DONG Ping,SHAO Hai-ming,CAI Jin-hui. DC High Current On-Line Calibration Devicebased on Digital Image Recognition and Optical Fiber Sensor. Acta Metrologica Sinica, 2021, 42(5): 623-628.
［1］吴永福, 卢锐, 廖知坚, 等. 国际大型铝企的电解铝液合金化现状 ［J］. 轻金属, 2018, (4): 1-3.
Wu Y F, Lu R, Liao Z J, et al. Current Status of Electrolytic Aluminum Alloying in Large Aluminum Enter-prises［J］. Light Metal, 2018,(4): 1-3.
［2］黄小鉥, 葛思敏, 余昆, 等. 考虑电解铝负荷特性的电网降损分析 ［J］. 电网与清洁能源, 2017, 33 (6): 77-81.
Huang X S, Ge S M, Yu K, et al. Analysis of power grid loss reduction considering electrolytic aluminum load characteristics［J］. Power Grid and Clean Energy, 2017, 33 (6): 77-81.
［3］崔桂梅, 薛法远, 刘丕亮. 基于槽况分类的铝电解电流效率预测研究 ［J］. 计算机仿真, 2017, 34 (1): 288-291, 387.
Cui G M, Xue F Y, Liu P L. Research on current efficiency prediction of aluminum electrolysis based on groove classification ［J］. Computer Simulation, 2017, 34 (1): 288-291, 387.
［4］Sun L H, Yu J. Design of Vector Control System for Brushless DC motor Based on Hall Sensor ［C］//Proceedings of the 2018 International Symposium on Communication Engineering & Computer Science (CECS 2018), 2018.
［5］项琼, 岳长喜, 胡琛, 等.基于霍尔传感器阵列的电流测量系统 ［J］. 电测与仪表, 2017, 54 (23): 105-110.
Xiang Q, Yue C X, Hu C, et al. Current Measurement System Based on Hall Sensor Array ［J］. Electrical Measurement & Instrumentation, 2017, 54 (23): 105-110.
［6］李传生, 邵海明, 赵伟, 等. 超大电流量值传递用光纤电流传感技术 ［J］. 红外与激光工程, 2017, 46 (7): 122-128.
Li C S, Shao H M, Zhao W, et al. Fiber optic current sensing technology for ultra-high current value transmi-ssion ［J］. Infrared and laser engineering, 2017, 46 (7): 122-128.
［7］谢小军,朱才溢,李庆先,等. 反射式Sagnac型光纤宽带大电流测量仪的研制与性能评估［J］. 计量学报, 2020, 41(8): 989-996.
Xie X J, Zhu C Y, Li Q X, et al. R&D and Performance Evaluation of Reflective Sagnac Interferometer-type Fiber Broadband High Current Measuring Instrument［J］. Acta Metrologica Sinica, 2020, 41(8): 989-996.
［8］李传生, 赵伟, 王家福, 等.直流光纤电流互感器谐波测量误差机理及改善 ［J］. 中国激光, 2017, 44 (9): 269-275.
Li C S, Zhao W, Wang J F, et al. Error Mechanism and improvement of harmonic measurement of DC optical fiber current transformer ［J］. China laser, 2017, 44 (9): 269-275.
［9］Wang Shuchao, Wan Fu, Zhao Hong, et al. A Sensi-tivity-enhanced Fiber Grating Current Sensor Based on Giant Magnetostrictive Material for Large-Current Meas-urement ［J］. Sensors, 2019, 19 (8): 1755.
［10］丁双, 任国营, 张福民, 等.改进的穿线法的卡尺图像识别 ［J］. 计量学报, 2019, 40 (5): 765-769.
Ding S, Ren G Y, Zhang F M, et al.The caliper image recognition of improved threading method ［J］. Acta Metrologica Sinica, 2019, 40 (5): 765-769.
［11］刘丹, 穆林丽, 余晓锷. 一种七段数码管式医用仪表的自动识别方法 ［J］. 科学技术与工程, 2010, 10 (16): 4037-4039.
Liu D, Mu L L, Yu X E. An automatic identification method for seven-segment digital tube medical instru-ment ［J］. Science Technology and Engineering, 2010, 10 (16): 4037-4039.
［12］李奇,李传生,梁波,等. 光纤直流大电流传感器非线性机理及校准技术［J］. 计量学报, 2021, 42(4): 409-414.
Li Q, Li C S, Liang B, et al. Nonlinear Mechanism and Calibration Technology of Fiber-Optic DC High Current Sensor［J］. Acta Metrologica Sinica, 2021, 42(4): 409-414.
［13］王夏霄, 张春熹, 姜中英, 等. 全光纤电流互感器1/4波片的优化设计 ［J］. 光学技术, 2005, 31: 241-243.
Wang X X, Zhang C X, Jiang Z Y, et al. Optimization design of quarter-wave plate of all-fiber currenttrans former ［J］. Optical Technique, 2005, 31: 241-243.
［14］王夏霄, 张春熹, 张朝阳, 等. 光纤电流互感器1/4波片温度特性及其影响研究 ［J］. 激光与红外, 2006, 36 (7): 596-598.
Wang X X, Zhang C X, Zhang C Y, et al. Study on temperature characteristics and influence of 1/4 wave plate of fiber-optic current transformer ［J］. Laser and Infrared, 2006, 36 (7):596-598.
2021, Vol. 42 
