定体积位移增量法测量医用微小流量技术研究

doi:10.3969/j.issn.1000-1158.2020.08.07

摘要
图/表
参考文献(10)
相关文章 (15)

全文: PDF (779 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要利用定体积活塞腔体测量微流量原理,在建立活塞位移量与流速的关系基础上,研究了医用微小流量的测量模型、理论计算方法、硬件设计以及对应的软件系统,该微流量测量技术能在短时间内完成对医用输液泵和注射泵的校准工作。实验结果表明,流量检测装置可测量1~1500mL/h的微小流量,不仅能够快速响应1mL/h微小流量,且测量瞬时流量值最大允许误差不大于±1%;当注射容量腔体液体体积大于5mL时所测得累计流量最大允许误差不大于±1%。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	廖旭辉
	陈昱桥
	杨勇
	王尧君
	张秋辰
	冉文杰
	杨俊杰
	李鹏

关键词 ：计量学, 微小流量, 定型腔, 位移增量, 推杆

Abstract：Using the principle of measuring the micro-flow rate of a fixed-volume piston cavity, based on the relationship between the piston displacement and the flow rate, the measurement model, theoretical calculation method, hardware design and corresponding software system of medical micro-flow are introduced. The micro-flow measurement technology can complete the calibration of medical infusion pump and injection pump in a short time. The experimental results show that the flow detector can measure the micro-flow rate from 1mL/h to 1500mL/h, and can not only respond to the micro-flow rate of 1mL/h quickly, but also the maximum allowable error of instantaneous flow rate is less than ±1%. The maximum allowable error of cumulative flow rate is less than ±1% when the volume of liquid in the injection chamber is larger than 5mL.

Key words： metrology microflow fixed volume cavity displacement increment push rod

收稿日期: 2019-01-07 发布日期: 2020-08-13

PACS:

TB973

通讯作者: 廖旭辉 E-mail: pvliao@126.com

作者简介: 廖旭辉(1984-), 男, 福建三明人,中国测试技术研究院助理研究员,主要从事医学计量的研究。Email: pvliao@126.com

引用本文:

廖旭辉,陈昱桥,杨勇,王尧君,张秋辰,冉文杰,杨俊杰,李鹏. 定体积位移增量法测量医用微小流量技术研究[J]. 计量学报, 2020, 41(8): 937-941.
LIAO Xu-hui,CHEN Yu-qiao,YANG Yong,WANG Yao-jun,ZHANG Qiu-chen,RAN Wen-jie,YANG Jun-jie,LI Peng. Research on Measurement of Medical Micro Flow Rate Technology Based on Constant Volume Displacement Increment Method. Acta Metrologica Sinica, 2020, 41(8): 937-941.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.08.07 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I8/937

［1］曹阳. 浅析输液泵的临床应用［J］. 医疗卫生装备, 2012, 33(9): 103-104.
Cao Y. Clinical Application of Infusion Pump［J］. Chinese Medical Equipment Journal, 2012, 33(9): 103-104.
［2］张勇. 液体微小流量测量方法的研究［D］. 上海大学, 2007.
［3］谢苏江, 谢文谦. 石墨烯/聚四氟乙烯复合密封材料的制备及性能研究［J］. 润滑与密封, 2018, 43(9): 104-107.
Xie S J, Xie W Q. The Preparation and Performance Study of Graphene/PTFE Composites Sealing Materials ［J］. Lubrication Engineering, 2018, 43(9): 104-107.
［4］朱沛, 张大伟, 黄元申, 等. 精密定位光栅尺的研究进展［J］. 激光杂志, 2010, 31(1): 1-3.
Zhu P, Zhang D W, Huang Y S, et al. Review on the precision positioning grating scale［J］. Laser Journal, 2010, 31(1): 1-3.
［5］国家质量监督检验检疫总局. JJF 1259-2018 医用注射泵和输液泵校准规范［S］. 2018.
［6］国家质量监督检验检疫总局. JJF 1104-2003 国家计量检定系统表编写规则［S］. 2003.
［7］何安国, 喻洪麟, 朱传新, 等. 光栅莫尔条纹细分及辨向方法研究［J］. 光电工程, 2007, 34(10): 45-49.
He A G, Yu H L, Zhu C X, et al. Subdivision and direction judgment of grating Moiré fringes［J］. Opto-electronic Engineering, 2007, 34(10): 45-49.
［8］张竟月,孙斌,谢玄达, 等. 基于激光和机器视觉的微量液体容量计量方法［J］. 计量学报, 2018, 39(4): 504-509.
Zhang J Y, Sun B, Xie X D, et al. Volume Metrology Method for Micro Liquid Based on Laser and Machine Vision［J］. Acta Metrologica Sinica, 2018, 39(4): 504-509.
［8］张百海, 柴森春, 贾媛媛, 等. 数据采集系统中光栅尺信号处理方法的研究［J］. 机床与液压, 2003, (2): 118-119.
Zhang B H, Chai S C, Jia Y Y, et al. Study of Linear Encoder Signal Processing Methods in Data Acquisition Systems［J］. Machine Tool & Hydraulics, 2003, (2): 118-119.
［9］刘刚, 凌强, 徐骏, 等. 基于STM32的输液监控系统设计与实现［J］. 信息技术与网络安全, 2016, (1): 91-94.
Liu G, Ling Q, Xu J, et al. Design and implementation of transfusion monitoring Systems based on STM32［J］. Information Technology and Network Security, 2016, (1): 91-94.
［10］周森, 徐健, 陶磊, 等. 用于圆柱体工件分段截面直径高精度测量方法［J］. 计量学报, 2017, 38(6A): 76-79.
Zhou S, Xu J, Tao L, et al. A High-precision Diameter Measuring Method for Multi-sections of Cylinder Workpiece［J］. Acta Metrologica Sinica, 2017, 38(6A): 76-79.