Anhui Province Key Laboratory of Measuring Theory and Precision Instrument, School of Instrument Science and Opto-electronic Engineering, Hefei University of Technology, Hefei,Anhui 230009, China
Abstract：The design and stable control of the stage are key factors in large stroke high-precision vertical motion.Therefore,a novel motion stage with a balancing mechanism is proposed to achieve large stroke nano stable motion in the vertical direction.The characteristics of the stage are that the N331 piezoelectric linear motor is independently driven,suspended through the air static guide rail,and the Z-axis balance system is designed to reduce the motor driving load.A stepping mode is used to realize the large travel actuation,and an analog mode is adopted to implement micro-displacement actuation.This strategy can be used to achieve fast and precise driving of 100mm.In addition,the Z-stage can achieve compound control of the nanostepping and analog modes.The positioning fluctuation can be limited to±9nm within the full range of 100mm.According to the verification experiments,the stage can be suitable for driving and control tasks in coordinate measuring machines (CMMs),microlithography,and micromachining applications.
LU Z W, LIU X Y, LU H, et al. Calculation and Research on Bearing Performance of the Aerostatic Guideway of Two-dimensional Motion Platform ［J］. Journal of Mechanical Engineering, 2022, 58 (23): 240-250.
［13］
KIM J, CHOI Y, AHN D, et al. A Millimeter-range Flexure-based Nano-positioning Stage Using a Self-guided Displacement Amplification Mechanism ［J］. Mechanism and Machine Theory, 2012, 50: 109-120.
TAKAHASHI M, YOSHIOKA H, SHINNO H. A Newly Developed Long-stroke Vertical Nano-motion Platform with Gravity Compensator ［J］. Journal of Advanced Mechanical Design Systems and Manufacturing, 2008, 2 (3): 356-365.
［16］
ZHU X, XU X, WEN Z, et al. A Novel Flexure-Based Vertical Nanopositioning Stage with Large Travel Range ［J］. Review of Scientific Instruments, 2015, 86 (10): 105112.
PAN P, ZHU J, GU S, et al. Development of stick-slip nanopositioning stage capable of moving in vertical direction ［J］. Microsystem Technologies-micro-and Nanosystems-information Storage and Processing Systems, 2020, 26 (9): 2945-2954.
ZHAO X Y, GAO S T, LI Q, et al. Construction and Experimental Research of a Two-dimensional Nano Displacement Measurement System ［J］. Acta Metrology sinica, 2015, 36 (6): 565-569.
GUO X, SHI Y S, PI L, et al. Research on Mirau Interferometric Micro/Nano Stepping Height Measurement System ［J］. Acta Metrology sinica, 2017, 38 (2): 141-144.
［8］
SAAD A, ELWARDANY A, El-SHARKAWY L, et al. Performance evaluation of a novel vertical axis wind turbine using twisted blades in multi-stage Savonius rotors ［J］. Energy Conversion and Measurement, 2021, 235: 114013.
［9］
KIM H, KIM J, AHN D, et al. Development of a Nanoprecision 3-DOF Vertical Positioning System with a Flexure Hinge ［J］. IEEE Transactions on Nanotechnology, 2013, 12 (2): 234-245.
［11］
TAN U, LATT W, SHEE C et al. A Low-Cost Flexure-Based Handheld Mechanism for Micromanipulation ［J］. IEEE-ASME Transactions on Mechatronics, 2011, 16 (4): 773-778.
CHE Y F, YANG G S, CHEN L G. Auto-focusing Technology in Perpendicular Length Measurement of Video Measuring Machine ［J］. Acta Metrology sinica, 2023, 44 (4): 521-526.
JI Z C, LI J F, DU H, et al. A Detection Method for Positioning Accuracy of 3D Phantom System in Situ Based on Refraction Compensation of Laser Tracker ［J］. Acta Metrology sinica, 2022, 43 (10): 1262-1270.
［3］
MOHAMMAD T, SALISBURY S. Design Considerations for Long Travel Z-Axis Ultra-Precision Positioning Stage ［J］. International Journal of Precision Engineering and Manufacturing, 2012, 13 (9): 1581-1588.
ZHANG X F, HUANG Q X, YUAN Y, et al. Large Stroke Two-dimensional Nano-positioning Stage with Angle Error Correction ［J］. Optics and Precision Engineering, 2013, 21 (7): 1811-1817.
［10］
LEE S, GWEON D. A New 3-DOF Z-tilts Micropositioning System Using Electromagnetic Actuators and Air Bearings ［J］. Precision Engineering, 2000, 24 (1): 24-31.
［17］
LYU Z, XU Q, ZHU L. Design of a Compliant Vertical Micropositioning Stage Based on Lamina Emergent Mechanisms ［J］. IEEE-ASME Transactions on Mechatronics, 2023, 28 (4): 2131-2141.
DONG W J, LI B Z, YANG J G. Design of Vertical Hydrostatic Sliding Platform with Nanometer Precision ［J］. Optics and Precision Engineering, 2017, 25 (8): 2121-2129.
FAN G Z, ZHU Z L, ZHONG T D. Development of a Small Micro/Nano Scale CMM ［J］. Nanotechnology and Precision Engineering, 2003, 1 (1): 17-23.
2024, Vol. 45 
