1.School of Information Science and Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China
2.The Key Laboratory for Computer Virtual Technology & System Integration of Hebei Province, Qinhuangdao,Hebei 066004, China
3.The Key Laboratory of Software Engineering of Hebei Province, Qinhuangdao,
Hebei 066004, China
4.School of Information and Electronic Engineering, Shangdong
Technology and Business University, Yantai, Shandong 264003, China
Abstract：Aiming at the problems of leakage and scraping of conventional oil logging flow collectors, an overall scheme of electric extruded rubber flow collector with rubber elastomer as the core is proposed. The finite element method and the Mooney-Rivlin hyperelastic constitutive model are used to simulate the rubber elastomer and study the influence of its shape, geometry and material properties on the flow collection performance. Moreover, an electric extruded rubber flow collector is developed and its flow collection performance is tested on a simulated well test rig. Experimental results demonstrate that the structure, hardness, friction coefficient with the pipe and the concave degree of the rubber have a significant influence on the performance of the collector; The rubber flow collector with hardness 58HA, size 80mm × 12mm, 4mm internal concavity and rounded internal concave elastomer has better flow collection performance than conventional umbrella type flow collector.
［1］王培烈, 赵忠健, 姚强, 等. 我国产出剖面测井回顾［J］. 测井技术, 2001, 25(3): 163-167.
Wang P L, Zhao Z J, Yao Q, et al. A review of production profile logging in china［J］. Well Logging Technology, 2001, 25(3): 163-167.
［2］赵培华. 中国陆上水驱油田开发测井技术［J］. 测井技术, 1998, 22(5): 1-4.
Zhao P H. Development logging technology for on shore waterflooded reservoir in China［J］. Well Logging Technology, 1998, 22(5): 1-4.
［3］朱洪征, 郭靖, 黄伟, 等. 低液量水平井存储式产液剖面测井技术与应用［J］. 钻采工艺, 2018, 41(6): 50-52.
Zhu H Z, Guo J, Huang W, et al. Development and application of memory type fluid production profile logging technology in low liquid output horizontal wells［J］. Drilling ＆ Production Technology, 2018, 41(6): 50-52.
［4］马宝全, 杨少春, 傅永强, 等. 低渗透油藏水平井油气水三相流测试技术［J］. 石油机械, 2018, 46(7): 56-61.
Ma B Q, Yang S C, Fu Y Q, et al. Oil-gas-water three-phase flow production logging technology for horizontal wells in low-permeability reservoirs［J］. China Petroleum Machinery, 2018, 46(7): 56-61.
［5］许福东, 华北庄, 王子荣, 等. 32mm双皮球集流式测试器室内性能研究［J］.石油机械, 2012, 40(12): 105-108.
Xu F D, Hua B Z, Wang Z R, et al. Research on the performance of the 32mm double ball collecting tester［J］. China Petroleum Machinery, 2012, 40(12): 105-108.
［6］刘合, 肖国华, 孙福超, 等. 新型大斜度井同心分层注水技术［J］. 石油勘探与开发, 2015, 42(4): 512-517.
Liu H, Xiao G H, Sun F C, et al. A new concentric zonal water injection technique for highly-deviated wells［J］. Petroleum Exploration and Development, 2015, 42(4): 512-517.
［7］李湘涛, 秦羽乔, 陈四平, 等. 水平井测井仪器输送技术及其应用［J］. 石油机械, 2014, 42(8): 98-102.
Li X T, Qin Y Q, Chen S P, et al. The horizontal well logging instrument conveying technology and its applications［J］. China Petroleum Machinery, 2014, 42(8): 98-102.
［8］王勇, 唐立强, 吴国辉. 可压缩球膜的膨胀和分叉［J］. 固体力学学报, 2009, 30(1): 42-47.
Wang Y, Tang L Q, Wu G H. Inflation and bifurcation of a compressible spherical membrane［J］. Chinese Journal of Solid Mechanics, 2009, 30(1): 42-47.
［9］危银涛, 杨挺青, 杜星文. 橡胶类材料大变形本构关系及其有限元方法［J］. 固体力学学报, 1999, 20(4): 281-289.
Wei Y T, Yang T Q, Du X W. On the large deformation rubber-like materials: constitutive laws and finite element method［J］. Acta Mechanica Solida Sinica, 1999, 20(4): 281-289.
［10］张良, 李忠华, 马新强. 橡胶Mooney-Rivlin超弹性本构模型的参数特性研究［J］. 噪声与振动控制, 2018, 38(S2): 427-430.
Zhang L, Li Z H, Ma X Q. Study on parameter characteristics of rubber Mooney-Rivlin model［J］. Noise and Vibration Control, 2018, 38(S2): 427-430.
［11］Lalo D F, Greco M, Meroniuc M, et al. Numerical modeling and experimental characterization of elastomeric pads bonded in a conical spring under multiaxial loads and pre-compression［J］. Mathematical Problems in Engineering, 2019, 2019(1): 1-14.
［12］王智宇, 王安稳. 多元线性回归法确定橡胶Mooney-Rivlin模型常数［J］. 海军工程大学学报, 2011, 23(2): 18-21.
Wang Z Y, Wang A W, Determination of mechanics constants of Mooney-Rivlin model by using multilinear regression method［J］. Journal of Naval University of Engineering, 2011, 23(2): 18-21.
［13］张希润, 蔡力勋, 陈辉. 基于能量密度等效的超弹性压入模型与双压试验方法［J］. 力学学报, 2020, 52(3): 787-796.
Zhang X R, Cai L X, Chen H. Hyperelastic indentation models and the dual-indentation method based on energy density equivalence［J］. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(3): 787-796.
［14］张忠立, 王灿, 林正皓, 等. 基于双向流固耦合技术的活塞式压力计研究［J］. 计量学报, 2021, 42(3): 276-281.
Zhang Z L, Wang C, Lin Z H, et al. Research of Piston Gauge Based on Two-way Fluid-structure Interaction Technique［J］. Acta Metrologica Sinica, 2021, 42(3): 276-281.
［15］杨春雷, 李斌, 郑旭, 等. 考虑工作温度的封隔器橡胶密封性和可靠性评价［J］. 应用力学学报, 2017, 34(6): 1079-1085.
Yang C L, Li B; Z X, et al. The evaluation of sealing and reliability of packer rubber based on working temperature［J］. Chinese Journal of Applied Mechanics, 2017, 34(6): 1079-1085.
［16］王晓龙, 李斌, 郑旭, 等. 封隔器分段式胶筒密封结构研究［J］. 应用力学学报, 2020, 37(6): 2650-2656.
Wang X L, Li B, Zheng X, et al. Study on sealing structure of compressed packer of new rubber［J］. Chinese Journal of Applied Mechanics, 2020, 37(6): 2650-2656.
［17］Lalo D F, Greco M. Rubber bushing hyperelastic behavior based on shore hardness and uniaxial extension［C］//24th ABCM International Congress of Mechanical Engineering. Curitiba, Brazil, 2017.
［18］刘明, 黄承馨, 高诚辉. 试样倾斜对球形压头微米划痕测试紫铜摩擦系数的影响［J］. 计量学报, 2020, 41(10): 1252-1259.
Liu M, Huang C X, Gao C H. Effect of sample tilt on measurement of friction coefficient by microscratch test of copper with a spherical indenter［J］. Acta Metrologica Sinica, 2020, 41(10): 1252-1259.
［19］黎伟, 胡亚军, 陈曦, 等. 双梯度钻井套管内压力隔断封隔器胶筒研究［J］. 机械科学与技术, 2020, 39(7): 1107-1113.
Li W, Hu Y J, Chen X, et al. Research on rubber cylinder of pressure partition packer in double-gradient drilling casing［J］. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(7): 1107-1113.
2022, Vol. 43 
