基于改进型两次平衡对检法的感应分压器自校准方法

doi:10.3969/j.issn.1000-1158.2022.05.13

摘要
图/表
参考文献(16)
相关文章 (15)

全文: PDF (731 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要介绍了参考电势变压器和指零仪变压器设计原理,分析了屏蔽间泄漏对测量结果的影响;对常规两次平衡参考电势对检法进行了改进,使零平衡和段平衡测量过程中,参考电势和测差电路均可实现等电位保护;对自校准方法进行了推导,校准结果仅与段平衡和零平衡时锁相放大器测量的电压差值相关,与参考电势变压器、指零仪变压器、辅助变压器等的误差无关,屏蔽间泄漏的影响也得到消除。对1kV感应分压器进行了校准实验,并对校准结果进行了测量不确定度分析,其相对扩展不确定度的评估结果为5.4×10^-8(k=2)。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	冯建
	孙健
	潘洋

关键词 ：计量学;感应分压器;两次平衡对检法, 自校准;参考电势;屏蔽泄漏;不确定度

Abstract：The design method of reference voltage transformer and null detection transformer was introduced. The influence of leakage current between shielding of the transformers was analyzed. The classic incremental buildup calibration method was improved. Both the reference voltage and voltage difference measurement circuit got equipotential protection in zero balance and section voltage balance measurement procedures. The process of self-calibration method was derived. Calibration result was only related to the voltage difference measured by the lock-in amplifier during two balance procedures. The influences of reference voltage transformer, null detection transformer, auxiliary transformer and leakage current between shielding were removed. The calibration results of 1kV inductive voltage divider was presented, and the measurement uncertainty was evaluated, the relative expanded uncertainty was 5.4 × 10^-8(k=2).

Key words： metrology;inductive voltage divider incremental buildup calibration method self-calibration reference voltage leakage between shielding uncertainty

收稿日期: 2021-08-16 发布日期: 2022-05-18

PACS:

TB971

基金资助:国家重点研发计划(2016YFF0201201, 2017YFF0205703);上海市市场监督管理局科研项目(2019-03)

作者简介: 冯建(1986-),男,汉族,江苏南通人,上海市计量测试技术研究院高级工程师,主要研究方向为阻抗、功率等电磁参数的精密测量。Email:fengj@simt.com.cn

引用本文:

冯建,孙健,潘洋. 基于改进型两次平衡对检法的感应分压器自校准方法[J]. 计量学报, 2022, 43(5): 643-648.
FENG Jian,SUN Jian,PAN Yang. Self-calibration Method of Inductive Voltage Divider Based on Improved Incremental Buildup Method. Acta Metrologica Sinica, 2022, 43(5): 643-648.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2022.05.13 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2022/V43/I5/643

［1］Avramov S, Oldham N M, Jarrett D G, et al. Automatic Inductive Voltage Divider Bridge for Operation from 10 Hz to 100 kHz［J］. IEEE Transactions on Instrumentation & Measurement, 2002, 42(2):131-135.
［2］杨雁, 黄璐, 王维,等. NIM新一代二端对电容电桥装置［J］. 计量学报, 2020,41(3):284-289.
Yang Y, Huang L, Wang W, et al. The new two terminal-pair capacitance bridge at NIM［J］. Aata Metrologica Sinica, 2020,41(3):284-289.
［3］许峰, 冯建, 孙健,等. 高准确度有源双级感应分压器的研制［J］. 中国计量, 2019(5):83-85.
Xu F, Feng J, Sun J, et al. Development of high accuracy active two-stage inductive voltage divider［J］. China Metrology, 2019(5):83-85.
［4］冯建, 胡俊杰, 胡斌. 交流注入式电池内阻测试仪电阻参数的校准方法［J］. 计量学报, 2020, 41(5):83-87.
Feng J, Hu J J, Hu B. Calibration Method for AC Internal Resistance Measurement Function of Battery Testers［J］. Acta Metrologica Sinca, 2020, 41(5):83-87.
［5］Small G W, Budovsky I F, Gibbes A M, et al. Precision three-stage 1000V/50 Hz inductive voltage divider［J］. IEEE Transactions on Instrumentation & Measurement, 2005, 54(2):600-603.
［6］Zhao J, Yan Y, Lu Y, et al. An improved bootstrap method for the calibration of inductive voltage dividers［C］//IEEE. 2012 Conference on Precision Electromagnetic Measurements. 2012.doi:10.1109/CPEM.2012.6251133.
［7］JJG 244—2003 感应分压器检定规程［S］.
［8］Feng J,Pan Y, Lai L, et al. Incremental Buildup Calibration Method of Inductive Voltage Divider［C］//IEEE. 2020 Conference on Precision Electromagnetic Measurements.2020.doi:10.1109/CPEM49742.2020.9191690.
［9］Feng J, Lai L, Shi L B, et al. Two calibration methods for inductive voltage divider［C］// IEEE.2014 Conference on Precision Electromagnetic Measurements.2014.doi:10.1109/CPEM.2014.6898508.
［10］王维, 刘夏, 张欣. 1000V多盘感应分压器标准建立［J］. 计量学报, 2020,41(7):852-856.
Wang W, Liu X, Zhang X. Research on 1000V Multi-decade Inductive Voltage Divider Standard［J］. Acta Metrologica Sinica, 41(7):852-856.
［11］Sze W C, Dunn A F, Zapf T L. An International Comparison of Inductive Voltage Divider Calibrations at 400 and 1000Hz［J］. IEEE Transactions on Instrumentation and Measurement, 1965, IM-14(3):124-131.
［12］冯建, 石雷兵, 刘文芳,等. 二进制感应分压器及其在高速采样器线性度校准中的应用［J］. 电测与仪表, 2013, 50(11A):112-114.
Feng J, Shi L B, Liu W F, et al. Binary Inductive Voltage Divider and its Application in Calibration of the Linearity of Wideband Digitizer［J］. Electrical Measurement & Instrumentation, 2013, 50(11A):112-114.
［13］任士焱, 张智杰, 周术,等. 电流比较仪磁屏蔽效能的计算［J］. 计量学报, 2003, 24(4):321-324.
Ren S Y, Zhang Z J, Zhou S, et al. Calculation of Magnetic Shielding Effectiveness of Current Comparator［J］. Acta Metrologica Sinica, 2003, 24(4):321-324.
［14］李龙女, 李岩, 井永腾,等. 电力变压器漏磁场与杂散损耗计算的研究［J］. 电工技术学报, 2013, 28(S2):122-127.
Li L N, Li Y, Jing Y T, et al. Research of Leakage Magnetic Field and Stray Loss Calculation in Power Transformer［J］. Transactions of China Electrotechnical Society, 2013, 28(S2):122-127.
［15］宋文涛,陈川,周新华. 实负荷下容性泄漏对标准电能计量的影响分析［J］. 计量科学与技术,2021, 65(8): 71-75 .
Song W T, Chen C, Zhou X H. Influence of Capacitive Leakage on Electric Energy Measurement with a Standard Meter Under Real-Load Conditions［J］. Metrology Science and Technology, 2021, 65(8): 71-75 .
［16］刘罡, 姜春阳, 曾辉. 工频电压比例标准多盘感应分压器校准线路分析及校准结果不确定度评定［J］. 东北电力技术, 2017, 38(11):60-62.
Liu G, Jiang C Y, Zeng H. Circuit Analysis and Uncertainty Evaluation of Multiple Winding Inductive Voltage Divider for Apparatus of Voltage Ratio Standards at Power Frequency［J］. Northeast Electric Power Technology, 2017, 38(11):60-62.