1. College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, Shandong 266590, China
2. National Institute of Metrology, Beijing 100029, China
3. College of Precision Instrument and Optoelectronic Engineering, Tianjin University, Tianjin 300072, China
4. GD Power Development Company, Beijing 600795, China
Abstract：A strain calibration test method and device of equal strength cantilever FBG sensor based on deflection analysis are introduced.The simulation analysis method of related parameters in the strain transfer process of FBG sensor is studied.The relevant parameters in the strain transfer process are accurately measured, and the surface strain and deflection of equal strength cantilever beam under different loads are theoretically analyzed and simulated.At the same time, the relationship between deflection and beam surface strain and FBG sensor strain is analyzed, the strain sensitivity of FBG sensor after calibration is given, and the uncertainty of the calibration result of FBG sensor measured by deflection method is evaluated. When the inclusion factor k=2, the relative extended uncertainty of strain sensitivity of FBG sensor is less than 0.5%, which can meet the requirements of high-precision strain test, and provides technique support for strain calibration of high-precision FBG sensor.
［1］蔡璐璐, 万玉良, 吴飞. 高双折射光纤光栅扭转特性分析与应用 ［J］. 计量学报, 2016, 37 (4): 342-346.
Cai L L, Wan Y L, Wu F. Analysis and application on characteristic of twisted high birefringence fiber grating ［J］. Acta Metrologica Sinica, 2016, 37 (4): 342-346.
［2］张玉燕, 任天昕, 温银堂, 等. 复合材料胶层光纤布格光栅应变监测优化配置研究 ［J］. 计量学报, 2018, 39 (2): 168-172.
Zhang Y Y, Ren T X, Wen Y T, et al. Strain Measurement and Optimal Placement of Fiber Bragg Sen-sors in Adhesive Layer of Composites ［J］. Acta Metrologica Sinica, 2018, 39 (2): 168-172.
［3］魏晋和, 崔建军, 张福民, 等. 光纤光栅应变传感器校准的环境温度测量系统及其标定方法研究 ［J］. 计量学报, 2019, 40 (z1): 42-46.
Wei J H, Cui J J, Zhang F M, et al. Research on multi-point temperature field measurement system for fiber bragg grating measurement environment ［J］. Acta Metrologica Sinica, 2019, 40 (z1): 42-46.
［4］Lawson N J, Correia R, James S W, et al. Development and application of optical fibre strain and pressure sensors for in-flight measurements ［J］. Measurement Science and Technology, 2016, 27 (10): 104001.
［5］白生宝, 肖迎春, 黄博, 等. FBG传感器应变标定方法 ［J］. 振动.测试与诊断, 2016, 36 (2): 321-324,403.
Bai S B, Xiao Y C, Huang B, et al. Research on Strain Calibration Method of Fiber Bragg Grating Sensor ［J］. Journal of Vibration, Measurement & Diagnosis, 2016, 36 (2): 321-324, 403.
［6］李红, 祝连庆, 刘锋, 等. 裸光纤光栅表贴结构应变传递分析与实验研究 ［J］. 仪器仪表学报, 2014, 35 (8): 1744-1750.
Li H, Zhu L Q, Liu F, et al. Strain transfer analysis and experimental research of surface bonded bare FBG ［J］. Chinese Journal of Scientific Instrument, 2014, 35 (8): 1744-1750.
［7］曹敏, 王恩, 李博, 等. FBG应变传感器标定过程中的不确定度研究 ［J］. 传感器与微系统, 2016, 35 (9): 30-32.
Cao M, Wang E, Li B, et al. Research on uncertainty in process of FBG strain sensor calibration［J］. Transducer and Microsystem Technologies, 2016, 35 (9): 30-32.
［8］李慧鹏, 魏晓马, 赵庆松, 等. 一种无封装FBG应变传感器标定方法 ［J］. 半导体光电, 2018, 39 (6): 770-773.
Li H P, Wei X M, Zhao Q S, et al. A Calibration Method for Unencapsulated FBG Strain Sensor ［J］ Semiconductor Optoelectronics, 2018, 39 (6): 770-773.
［9］李泓洋, 张鹏浩, 王中宇. 表面粘贴式光纤光栅应变传递分析［C］// 中国科协年会——分3计量测试技术及仪器学术研讨会. 中国:西安 2016.
［10］Luecke W E, French J D. Sources of Strain-Measure-ment Error in Flag-Based Extensometry ［J］. Journal of the American Ceramic Society, 1996, 79 (6): 1617-1626.
［11］晏志鹏, 邓足斌. 四点简支等弯矩梁装置对应变计标定精度影响 ［J］. 中国测试, 2019, 45 (10): 101-108.
Yan Z P, Deng Z B. Influence of strain gages calibration accuracy with four-point simple supported curved beam device ［J］. China Measurement & Test, 2019, 45 (10): 101-108.
［12］孙丽, 梁德志, 李宏男. 等强度梁标定FBG传感器的误差分析与修正 ［J］. 光电子·激光, 2007,18 (7): 776-779.
Sun L, Liang D Z, Li H N. Analysis and modication of demarcate error of FBG sensor by equal ［J］. Journal of Optoelectronics·Laser, 2007, 18 (7): 776-779.
［13］苏晨辉, 张雷, 隋青美, 等. 表面粘贴式光纤光栅传感器的应变传递机理分析与实验研究 ［J］. 传感技术学报, 2018, 31 (4): 513-517.
Su C H, Zhang L, Sui Q M, et al. Strain Transfer Mechanism Analysis and Experimental Study of Surface Bonded Fiber Bragg grating Sensor ［J］. Chinese Journal of Sensors and Actuators, 2018, 31 (4): 513-517.
［14］Shen W, Wang X X, Xu L, et al. Strain transferring mechanism analysis of the substrate-bonded FBG sensor ［J］. Optik, 2018, 154: 441-452.
［15］陈昊, 郭阳宽, 闫光, 等. 基片式光纤光栅传感器应变传递分析与试验 ［J］. 传感器与微系统, 2016, 35 (6): 38-41.
Chen H, Guo Y K, Yan G, et al. Strain transfer analysis and experimental research of substrate package fiber grating sensor ［J］. Transducer and Microsystem Technologies, 2016, 35 (6): 38-41.
［16］吴俊, 陈伟民, 章鹏, 等. 粘接层弹性模量对光纤Bragg光栅传感器应变传递性能的影响 ［J］. 光学精密工程, 2011, 19 (12): 2941-2946.
Wu J, Chen W M, Zhang P, et al. Influence of bond layer characteristics on strain sensing properties of FBG sensors. ［J］. Optics and Precision Engineering, 2011, 19 (12): 2941-2946.
［17］Li H, Zhu L Q, Dong M L, et al. Analysis on strain transfer of surface-bonding FBG on Al 7075-T6 alloy host ［J］. Optik-International Journal for Light and Electron Optics, 2016, 127 (3): 1233-1236.
［18］曾鹏, 王源, 陈飞琼, 等. 胶粘剂对表贴式聚酰亚胺光纤布拉格光栅应变传递的影响分析 ［J］. 传感技术学报, 2019, 32 (1): 43-49.
Zeng P, Wang Y, Chen F Q, et al. Analysis of the Effect of Adhesives on Strain Transfer for Surface Bonded Polyimide Fiber Bragg Grating ［J］. Chinese Journal of Sensors and Actuators, 2019, 32 (1): 43-49.
［19］Chen G, Ding K Q, Feng Q B, et al. Strain Transfer Mechanism of Grating Ends Fiber Bragg Grating for Structural Health Monitoring ［J］. Structural Durability & Health Monitoring, 2019, 13 (3): 289-301.
［20］章亚男, 范迪, 沈林勇, 等. FBG细径形状传感器的应变传递和精度实验 ［J］. 光学精密工程, 2019, 27 (7): 1481-1491.
Zhang Y N, Fan D, Shen L Y, et al. Strain transmission and accuracy experimenton fiber Bragg grating small-diameter shape sensors ［J］. Optics and Precision Engineering, 2019, 27 (7): 1481-1491.
［21］江承成. 基于等强度梁的FBG应变传感器标定系统开发［D］. 厦门:厦门大学, 2019.
2021, Vol. 42 
