一种基于感应比例电桥平衡法的同步分解标准器校准装置

doi:10.3969/j.issn.1000-1158.2021.09.13

摘要
图/表
参考文献(14)
相关文章 (15)

全文: PDF (854 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对工业自动化和国防军事领域同步分解电角度量值溯源需求,提出了一种基于多盘感应比例电桥平衡原理的同步分解电角度校准方法,并组建了一套同步分解标准器校准装置。该装置通过电桥的准电压平衡和不平衡误差电压解算的方法获得同步分解电角度的标准值,并通过相对简单的接线方式,实现同步和分解两种模式下0°～360°电角度的校准。对同步模式下电角度校准装置的不确定度进行了评估,不确定度达到0.00013°(0.47″)。该方法具有准确度高、操作简单、测量速度快的特点,使同步分解电角度量值溯源到感应电压比例标准。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	金海彬
	李小舟
	王乾娟
	扈蓓蓓
	游立

关键词 ：计量学, 电角度, 同步分解, 感应比例, 电桥平衡, 校准装置, 测量不确定度

Abstract：In order to meet the demand of synchro/resolver electrical angle quantity traceability in industrial automation and defense military field, a calibration method based on multi-disk induction ratio and bridge balance principle is proposed and a calibration device is formed for synchro/resolver electrical angle. The standard values of synchro/resolver electrical angle is obtained by the quasi-voltage balance of the bridge and the unbalanced error voltage resolving method, and realizes the calibration of 0 ° ~ 360 ° electric angle in synchronous and decomposition modes through relatively simple wiring mode. The uncertainty of the electrical angle calibration device in the synchronous mode is evaluated, the uncertainty reached 0.00013°(0.47″). The method has the characteristics of high accuracy, simple operation and fast measuring speed, and the synchro/resolver electric angle value is traced to the induced voltage ratio standard.

Key words： metrology electrical angle synchro/resolver induction ratio bridge balance calibration device measurement uncertainty

收稿日期: 2020-03-13 发布日期: 2021-09-24

PACS:

TB971

作者简介: 金海彬(1965-),男,浙江义乌人,北京东方计量测试研究所研究员,主要从事精密电磁测量技术和电学计量标准器具的研究。Email: jhb304@163.com

引用本文:

金海彬,李小舟,王乾娟,扈蓓蓓,游立. 一种基于感应比例电桥平衡法的同步分解标准器校准装置[J]. 计量学报, 2021, 42(9): 1200-1205.
JIN Hai-bin,LI Xiao-zhou,WANG Qian-juan,HU Bei-bei,YOU Li. Induction Ratio Bridge Balance Method-based Synchro/resolver Standard Calibration Device. Acta Metrologica Sinica, 2021, 42(9): 1200-1205.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.09.13 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I9/1200

［1］Synchro/Resolver Standard Installation/Operation Manual for Model 5300［M］. New York: North Atlantic Instruments, 1995.
［2］Model DSRS-5DADecade Synco/Resolver Standard Instruction Manual［M］. Cleveland: TEGAM INC, 2007.
［3］李声晋, 周奇勋, 卢刚. 一种旋转变压器——RDC测角系统的数字标定及补偿方法［J］. 微特电机, 2007, (6): 26-28.
Li S J, Zhou Q X, Lu G. Digital calibration and compensation method for angle measure system based on resolver-RDC［J］. Small & Special Electrical Machines, 2007, (6): 26-28.
［4］徐大林, 陈建华. 自整角机/旋转变压器——数字变换技术及发展［J］. 测控技术, 2005, 24(10): 1-5.
Xu D L, Chen J H. Technology and development of digital to synchro/resolver to digital conversion［J］. Measurements & Control Technology, 2005, 24(10): 1-5.
［5］周岗, 陈永冰, 李文魁, 等. 自整角机/旋转变压器轴角模数解算方法［J］. 海军工程大学学报, 2013, 25(3): 25-29.
Zhou G, Chen Y B, Li W K, et al. Axial angle analog-digital conversion method for synchro/resolver［J］. Journal of Naval University of Engineering, 2013, 25(3): 25-29.
［6］Dorosinsky A. A study of the error of the octant selector component of an analog-to-digital transducer of the signals of a sine-cosine synchroresolver［J］. Measurement Techniques, 2011, 54(2): 150-156.
［7］Aksenenko V D, Epifanov O K. A New Generation of Precision Angle Digitizers［J］. Measurement Techniques, 2013, 56(3): 252-258.
［8］Aerospace/Defense. Intelligent DSP-based, Two Channel, Programmable, Synchro/Resolver simulator Now Available Through North Atlantic Industries［R］. Defense & Aerospace Week, 2010.
［9］邓卫东. 5300同步分解标准校准技术［C］// 2012航空试验测试技术学术交流会. 中国, 北京, 2012: 349-351.
［10］中国民用航空总局. JJG 0081-2005 DSRS-5DA型十进制同步、解调标准检定规程［S］. 2005.
［11］金海彬, 胡志远, 彭诚, 等. 一种基于感应比例电压补偿法的同步分解电角度校准装置［J］. 宇航计测技术, 2018,38(5): 48-54.
Jin H B, Hu Z Y, Peng C, et al. Induction Proportional Voltage Compensation Method-based Synchro/resolver Electrical Angle Calibration Device［J］. Journal of Astronautic Metrology and Measurenment, 2018,38(5): 48-54.
［12］TEGAM. PRT73 Precision Ratio Transformer Instruction and Service Manual［Z］. Cleveland: TEGAM Inc, 2015.
［13］梁志国. 正弦波拟合参数的不确定度评定［J］. 计量学报, 2018, 39(6): 888-894.
Liang Z G. The Measurement Uncertainty of Curve-fit Parameters of Sinusoidal［J］. Acta Metrologica Sinica, 2018, 39(6): 888-894.
［14］陈凌峰. 标准不确定度A类评定中极差法的深入讨论［J］. 计量学报, 2019, 40(2): 347-352.
Chen L F. The Further Discussion of the Range Method in the Type A Evaluation of Standard Uncertainty［J］. Acta Metrologica Sinica, 2019, 40(2): 347-352.