镜片全自动测量系统的研究

doi:10.3969/j.issn.1000-1158.2021.03.07

摘要
图/表
参考文献(16)
相关文章 (15)

全文: PDF (3388 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了提高镜片焦度测量的精度和效率,针对镜片测量时因手动调节而存在镜片偏心等问题,提出了一种结合哈特曼检测法、机器视觉技术以及步进电机控制系统来测量镜片的技术方案。基于此方案设计并制作了一种镜片全自动测量系统。系统实现了对哈特曼光阑下多光斑实时大小和位置的分析,利用搭建的机械模块自动校准镜片位置并测量镜片。用-15m^-1~+15m^-1的球面镜片进行重复性测量,实验结果表明:该系统实现了镜片的全自动测量,检测结果符合国家检定规程的要求,与手动测量结果相比测量误差减少了0.02m^-1,提高了测量精度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	何荣
	金涛

关键词 ：计量学, 镜片, 自动测量, 机器视觉, 哈特曼检测法

Abstract：Aiming at the problems of lens eccentricity due to manual adjustment during lens detection, a technical solution for measuring the lens by combining Hartmann detection method, machine vision technology and stepper motor control system is proposed. Based on this scheme, an automatic lens detection system is designed and manufactured. By analyzing the real-time size and position of multiple light spots, the host computer communicates with the microcontroller to control the movement of the mechanical module, thereby automatically calibrating the lens position and measuring the lens. -15m^-1~+15m^-1 spherical lens is used for repeatable measurement. The experimental results show that the system achieves full-automatic lens measurement, and the test results meet the requirements of national metrological standards. Measurement error is less 0.02m^-1 than manual measurement results, the accuracy is improvemented.

Key words： metrology lens automatic detection machine vision Hartman test

收稿日期: 2020-02-21 发布日期: 2021-03-23

PACS:

TB96

基金资助:国家自然科学基金(51705324,510605297);上海市自然科学基金(16ZR1423000)

通讯作者: 金涛(1985-),男,安徽合肥人,上海理工大学副教授,主要从事精密测量的研究。Email: jintao@usst.edu.cn E-mail: jintao@usst.edu.cn

作者简介: 何荣(1995-),男,江苏泰州人,上海理工大学硕士研究生,研究方向为图像处理,精密测量。Email: herong2017@outlook.com

引用本文:

何荣,金涛. 镜片全自动测量系统的研究[J]. 计量学报, 2021, 42(3): 301-307.
HE Rong,JIN Tao. Research on Lens Automatic Detection System. Acta Metrologica Sinica, 2021, 42(3): 301-307.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.03.07 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I3/301

［1］刘文丽, 洪宝玉, 朱建平, 等. 焦度计用柱镜度标准镜片的研究［J］. 计量学报, 2009, 30(3): 205-208.
Liu W L, Hong B Y, Zhu J P, et al. Study on Standard Lenses for Testing the Cylinder Power of Focimeters［J］. Acta Metrologica Sinica, 2009, 30(3): 205-208.
［2］张吉焱, 刘文丽, 孙劼. 综合验光仪中镜片偏心与倾斜对验光的影响分析［J］. 计量学报, 2010, 31(1): 17-21.
Zhang J Y, Liu W L, Sun J. Effect on Optometry for Decentration and Tilt of lense in Phoropters ［J］. Acta Metrologica Sinica, 2010, 31(1): 17-21.
［3］Barbosa E A, Silva D M, Nascimento C E, et al. Progressive power lens measurement by low coherence speckle interferometry［J］. Optics and Lasers in Engineering, 2013, 51(7): 898-906.
［4］李飞, 李林, 洪宝玉, 等. 基于激光差动共焦技术的后顶焦度测量系统［J］. 计量学报, 2014, 35(2): 129-132.
Li F, Li L, Hong B Y, et al. Back-vertex-power Measurement System Based on Laser Differential Confocal Technique［J］. Acta Metrologica Sinica, 2014, 35(2): 129-132
［5］Mahmoud Elsayed & Sammani, Fawaz & Hamdi. (2018). Optical power measurement using image processing techniques. 205-208. 10. 1109/ICSIGSYS. 2018. 8372667.
［6］Salas-Peimbert D P, Trujillo-Schiaffino G, GonzáLez-Silva J A, et al. Simple Hartmann test data interpretation for ophthalmic lenses［J］. Review of Scientific Instruments, 2006, 77(4): 043102.
［7］吴佳杰, 徐安成, 陈家璧, 等. 基于哈特曼-夏克波前测量原理的焦距测量［J］. 光子学报, 2011, 40(6): 912-915.
Wu J J, Xu A C, Chen J B, et al. Measurement of focal length based on hartmann-sharke wavefront measurement principle［J］. Acta Photonica Sinica, 2011, 40(6): 912-915.
［8］Mendoza-Villegas P G, Trujillo-Schiaffino G, Salas Peimbert D P, et al. Measurement of spherical and cylindrical power in ophthalmic lenses based in the change of lateral amplification［J］. Review of Scientific Instruments, 2015, 86(2): 023103.
［9］Ko W, Kim S. Measurement system of the refractive power of spherical and sphero-cylindrical lenses with the magnification ellipse fitting method［J］. Review of Scientific Instruments, 2009, 80(11): 15109-15109.
［10］谢银月, 李湘宁. 自动焦度计定量计算式的研究［J］. 上海理工大学学报, 2013, 35(2): 161-164.
Xie Y Y, Li X N. Quantitative Formula for Automatic Focimeter［J］. Journal of Shanghai university of science and technology, 2013, 35(2): 161-164.
［11］王颖, 张玉存. 基于绿激光图像识别的热态大型锻件长度尺寸测量［J］. 计量学报, 2018, 39(3): 316-20.
Wang Yin, Zhang C Y. The Length Dimension Measurement for Large Hot Forgins Based on the Recognition of Green Laser［J］. Acta Metrologica Sinica, 2018 ,39(3): 316-20.
［12］田亚玲, 李创社, 陈海霞, 等. 基于LabVIEW的三光子符合计数实时3D显示系统［J］. 中国激光, 2018, 45(12): 168-172.
Tian Y L, Li C S, Chen H X, et al. Real-Time 3D Display of Three-Photon Coincidence Counting Using LabVIEW Program［J］. Chinese Joural of Lasers, 2018, 45(12): 168-172.
［13］石韵昭, 倪军, 李宁钏, 等. 基于机器视觉的双工位载带检测系统研究［J］. 计量学报, 2019, 40(2): 22-26.
Shi Y Z, Ni Jun, Li N C, et al. Moving Vehicle Detection Based on Computer Vision［J］. Acta Metrologica Sinica, 2019, 40(2): 22-26
［14］陈硕, 刘丰, 唐旭晟, 等. 基于机器视觉技术的水表在线检定系统研究［J］. 计量学报, 2017,38(4):473-476.
Chen Shuo, Liu Fen, Tang X S, et al. Research on On-line Water-meter Verification System Based on Computer Vision Technology［J］. Acta Metrologica Sinica, 2017,38(4):473-476.
［15］程利群, 王晓曼, 景文博. 利用标记分水岭法实现夏克-哈特曼波前传感器质心探测［J］. 光学精密工程, 2014, 22(6): 1494-1499.
Cheng L Q, Wang X M, Jing W B. Centroid dection of Shack-Hartmann wave-front sensor by marked watershed method［J］. Optics and Precision Engineering, 2014, 22(6): 1494-1499
［16］徐从裕, 高雨婷, 徐俊, 等. 几何重心法亚像素提取算法研究［J］. 计量学报, 2020, 41(2): 190-197.
Chen C Y, Gao Y T, Xu jun, et al. Research on Sub-pixel Extraction Algorithm of Geometric Center of GravityMethod［J］. Acta Metrologica Sinica, 2020, 41(2): 190-197.