基于特性图分析的科氏质量流量计模拟驱动研究

doi:10.3969/j.issn.1000-1158.2021.02.10

摘要
图/表
参考文献(14)
相关文章 (15)

全文: PDF (1848 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对模拟驱动流量管易停振、启振慢等问题,利用特性图法,分析了经典模拟驱动的驱动特性,并对两种典型的模拟驱动改进方法进行了研究,提出一种改进的差分驱动。研制4种模拟驱动的实现电路,进行了气液两相流驱动实验和启振实验。实验结果表明,新型模拟驱动的驱动信号幅值更稳定,启振更快;差分驱动显著提高了驱动能量;与经典模拟驱动相比,改进的差分驱动的驱动信号和传感器信号幅值分别提高了4.2倍、3.8倍,驱动信号幅值的标准差仅为0.08,启振时间减少至2.3s。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	黄雅
	徐科军
	刘陈慈
	刘文
	乐静
	徐浩然
	张伦

关键词 ：计量学, 气液两相流, 科氏质量流量计, 改进的差分驱动, 驱动特性图, 模拟驱动

Abstract：Aiming at the problems of easy-to-stop vibration and slow start-up of analog drive flow tube, the characteristic simulation method is used to analyze the drive characteristics of classical analog drive, and two typical analog drive improvement methods are studied. An improved differential drive is proposed. Four kinds of analog drive implementation circuits are developed, and gas-liquid two-phase flow drive experiments and vibration experiments are carried out. The experimental results show that the differential drive significantly increases the driving energy; the driving signal of the new analog driving is more stable and the start-up is faster; Compared with the classical analog drive, the amplitude of drive signal and sensor signal of the improved differential drive are increased by 4.2 times and 3.8 times, the standard deviation of the drive signal amplitude is only 0.08, and the start-up time is reduced to 2.3s.

Key words： metrology gas-liquid two-phase flow Coriolis mass flowmeter improved differential drive drive characteristic diagram analog drive

收稿日期: 2019-06-04 发布日期: 2021-02-18

PACS:

TB937

通讯作者: 徐科军(1956-)男,江苏无锡人,合肥工业大学教授,博士生导师,主要从事传感器技术、自动化仪表和数字信号处理方面的研究。Email: dsplab@hfut.edu.cn E-mail: dsplab@hfut.edu.cn

作者简介: 黄雅(1995-),男,广东湛江人,合肥工业大学在读硕士研究生,研究方向为自动检测技术。Email: 15556960878@163.com

引用本文:

黄雅,徐科军,刘陈慈,刘文,乐静,徐浩然,张伦. 基于特性图分析的科氏质量流量计模拟驱动研究[J]. 计量学报, 2021, 42(2): 189-198.
HUANG Ya,XU Ke-jun,LIU Chen-ci,LIU Wen,YUE Jing,XU Hao-ran,ZHANG Lun. Research on Analog Drive of Coriolis Mass Flowmeter Based on Characteristic Graph Analysis. Acta Metrologica Sinica, 2021, 42(2): 189-198.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.02.10 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I2/189

［1］Anklin M, Drahm W, Rieder A. Coriolis mass flowmeters: Overview of the current state of the art and latest research［J］.Flow Measurement & Instrumentation, 2006, 17(6): 317-323.
［2］侯其立, 徐科军, 李叶, 等. 基于TMS320F28335的高精度科氏质量流量变送器研制［J］.仪器仪表学报, 2010, 31(12): 2788-2795.
Hou Q L, Xu K J, Li Y, et al. Development of high precision Coriolis mass flow transmitter based on TMS320F28335［J］.Chinese Journal of Scientific Instrument, 2010, 31(12): 2788-2795.
［3］徐科军, 于翠欣, 苏建徽, 等. 基于DSP的科氏质量流量计信号处理系统［J］.仪器仪表学报, 2002, 23(2): 170-175.
Xu K J, Yu C X, Su J H, et al. Signal Processing System of Coriolis Mass Flowmeter Based on DSP［J］.Chinese Journal of Scientific Instrument, 2002, 23(2): 170-175.
［4］梁平, 岳峥, 刘晨曦. 数字驱动技术在科氏质量流量计中的应用［J］.自动化技术与应用, 2018, 37(1): 122-124.
Liang P, Yue W, Liu C X. Application of Digital Drive Technology in Coriolis Mass Flowmeter［J］.Automation Technology and Application, 2018, 37(1): 122-124.
［5］马亚朋,石础,罗宇, 等. 科氏流量计气-液两相流的数值模拟［J］.计量学报, 2018, 39(5): 663-667.
Ma Y P, Shi C, Luo Y, et al. Numerical Simulation of Gas-liquid Two-phase Flow in Coriolis Flowmeter［J］.Acta Metrologica Sinica, 2018, 39(5): 663-667.
［6］Mayela Z, Manus P H. An FPGA Implementation of a Digital Coriolis Mass Flow Metering Drive System［J］.IEEE transactions on Industrial Electronics, 2008, 55(7): 2820-2831.
［7］Henry M P, Zamora M E. Startup techniques for a digital flowmeter: US 20110185820A1［P］.
［8］纪爱敏, 李川奇, 沈连官. 科里奥利质量流量计研究现状与发展趋势［J］. 仪表技术与传感器, 2001, 6(4): 1-3.
Ji A M, Li C Q, Shen L G. Research Status and Development Trend of Coriolis Mass Flowmeter［J］. Instrument Technology and Sensors, 2001, 6(4): 1-3.
［9］徐科军, 徐文福. 科氏质量流量计模拟驱动方法研究［J］.计量学报, 2005,26(2): 149-154.
Xu K J, Xu W F. Study on the Simulation Driving Method of Coriolis Mass Flowmeter［J］.Acta Metrologica Sinica, 2005,26(2): 149-154.
［10］Henry M, Tombs M, Duta M, el al. Two-phase flow metering of heavy oil using a Coriolis mass flow meter: A case study［J］.Flow Measurement and Instrumentation, 2006, 17(6): 399-413.
［11］张建国, 徐科军, 董帅, 等. 基于希尔伯特变换的科氏质量流量计信号处理方法研究与实现［J］.计量学报, 2017, 38(3): 309-314.
Zhang J G, Xu K J, Dong S, et al. Research and implementation of signal processing method for Coriolis mass flowmeter based on Hilbert transform［J］.Acta Metrologica Sinica, 2017, 38(3): 309-314.
［12］方正余, 徐科军, 张建国, 等. 科氏质量流量计差分驱动方式研究与实验［J］.电子测量与仪器学报, 2017, 31(12): 2030-2035.
Fang Z Y, Xu K J, Zhang J G, et al. Research and experiment on differential driving method of Coriolis mass flowmeter［J］. Journal of Electronic Measurement and Instrument, 2017, 31(12): 2030-2035.
［13］李苗, 徐科军, 侯其立, 等. 科氏质量流量计气液两相流实验装置设计［J］.实验技术与管理, 2012, 29(3): 75-79.
Li M, Xu K J, Hou Q L, et al. Design of Gas-liquid two-phase flow experimental device for Coriolis mass flowmeter［J］.Experimental Technology and Management, 2012, 29(3): 75-79.
［14］徐浩然,徐科军,张伦, 等. 基于驱动特性图法的科氏流量计模拟驱动设计［J］.计量学报, 2020, 41(8): 953-959.
Xu H R, Xu K J, Zhang L, et al. Analog Drive Design of Coriolis Flowmeter Based on Driving Characteristic Diagram Method［J］. Acta Metrologica Sinica, 2020, 41(8): 953-959.