Acta Metrologica Sinica  2016, Vol. 37 Issue (4): 448-451    DOI: 10.3969/j.issn.1000-1158.2016.04.26
Current Issue | Archive | Adv Search |
Research on Aerosol Dilution Method in the Calibration Process of Laser Paticle Counter
HUANG Zhi-huang1,LIU Jun-jie2,GUO Kai3
1. Fujian Metrology Institute, Fuzhou, Fujian 350003, China
2. National Institute of Metrology, Beijing 100029,  China
3. China University of Petroleum, Beijing 102249, China
Download: PDF (644 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  In order to solve the traceability problem that the laser particle counter can not be implemented by condensation nucleus counter based on direct comparing method, according to the principle of Bernoulli gas flow and the calculation method of aerosol dilution ratio, the dilution process of aerosol is analysed. As the increase of added gas flow,it has a problem that the pressure inside the dilution chamber is not constant. A new method of aerosol dilution to meet the traceability issues of laser particle counter is proposed. The results show that the new method could settle the interference matter of aerosol outlet flow caused by make-up gas, and keep a better uniformity among 0~90 times particles dilution ratio of different diameter in high concentration of aerosol. The max relative error of the measured data and the theoretical calculation is no more than 4.4%.
Key wordsmetrology      laser particle counter      aerosol      dilution      calibration     
Received: 08 October 2014      Published: 31 May 2016
PACS:  TB99  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
HUANG Zhi-huang
LIU Jun-jie
GUO Kai
Cite this article:   
HUANG Zhi-huang,LIU Jun-jie,GUO Kai. Research on Aerosol Dilution Method in the Calibration Process of Laser Paticle Counter[J]. Acta Metrologica Sinica, 2016, 37(4): 448-451.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2016.04.26     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2016/V37/I4/448
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech