|
|
Geometry Error Identification on Calibration Device of Cryogenic Liquid Level Sensor |
WANG Mei-bao1,LI Dong-sheng1,HU Jia-cheng1,YANG Yang2,ZHU Yue2,ZHANG Cheng-lin2 |
1. China Jiliang University, College of Metrology & Measurement Engineering, Hangzhou, Zhejiang 310018, China
2. Shanghai Aerospace Equipments Manufacture, Shanghai 200245, China |
|
|
Abstract In order to solve the problems of fixture spatial attitude on calibration device of cryogenic liquid level sensor, an error identification based on the principle of multilateral method is proposed. Based on the high-precision distance measurement of laser tracker, using the principle of multilateral method to calibrate the track of the calibration device, a virtual coordinate system is created which uses the gravity opposite direction as Z-axis direction, and because two positions always being the same in rigid body, the redundant data of six errors are obtained, so the error identification of calibration device is finished. Simulation results show that the method is feasibility, combinating genetic algorithm and trust region method with Guass-Newton can effectively avoid non-convergence problem which were caused by unknown initial data.
|
Received: 18 September 2014
Published: 22 March 2016
|
|
Corresponding Authors:
LI Dong-sheng
E-mail: lidongsheng@cjlu.edu.cn
|
|
|
|
[1]张国雄, 林永兵, 李杏华, 李真. 四路激光跟踪干涉三维坐标测量系统[J].光学学报, 2003, 23(9): 1030-1036.
[2]林永兵, 李杏华, 张国雄. 基于多边法的三维坐标测量系统自标定最优方案[J].计量学报, 2003, 24(3): 166-173.
[3]林永兵, 张国雄, 李真,等. 四路激光跟踪干涉三维坐标测量系统自标定与仿真[J].仪器仪表学报, 2003, 24(2): 205-210.
[4]陈剑雄, 林述温, 韩国强. 基于球杆仪的旋转轴几何误差测量和辨识[J].计量学报, 2014, 35(3): 198-203.
[5]胡进忠, 余晓芬, 彭鹏, 黄开辉. 基于激光多边法的坐标测量系统布局优化[J].中国激光, 2014, 41(1): 0108006-6.
[6]Schwenke H, Frank M, Hannaford J. Error mapping of CMMs and machine tools by a single tracking interferometer[J].CIRP Annals-Manufacturing Technology, 2005, 54(1): 475-478.
[7]王金栋, 郭俊杰, 费致根, 等. 基于激光跟踪仪的数控机床几何误差辨识方法[J].机械工程学报, 2011, 47(14): 13-19.
[8]王金栋, 郭俊杰, 邓玉芬, 等. 应用激光跟踪仪的数控机床几何精度检测[J].西安交通大学学报, 2011, 45(3): 85-90.
[9]赵树忠. 提高激光跟踪三维坐标测量精度的研究[D].天津:天津大学, 2007. 19-21.
[10]胡朝晖, 王佳, 刘永东, 梁晋文. 纯距离法激光跟踪坐标测量系统的布局与仿真[J].光学技术, 2000, 26(5): 395-399.
[11]粟时平, 李圣怡, 王贵林. 基于空间误差模型的加工中心几何误差辨识方法[J].机械工程学报, 2002, 38(7): 121-125.
[12]任永杰, 邾继贵, 杨学友, 等. 利用激光跟踪仪对机器人进行标定的方法[J].机械工程学报, 2007, 43(9): 195-200.
[13]陈伦军, 等. 机械优化设计遗传算法[M].北京:机械工业出版社, 2005. 2-35. |
|
|
|