|
|
Calibration and Evaluation on High Precision Thermometry Bridge |
FANG Xin-yun1,SUN Jian-ping2,ZENG Fan-chao3,WANG Wei4,ZHANG Jun-feng1 |
1. Suzhou Institute of Measurement and Testing Technology, Suzhou, Jiangsu 215128, China
2. National Institute ofMetrology, Beijing 100029, China
3. Chengdu University of Technology, Chengdu, Sichuan 610059, China
4. Guangzhou Institute of Measurement and Testing Technology, Guangzhou, Guangdong 510030, China |
|
|
Abstract The RTU and RBC were used to calibrate and evaluate the F900 high precision thermometry bridge in the middle temperature primary standard laboratory of the National Institute of Metrology, and the effect of different frequency and output current on its measurement accuracy was analyzed in the temperature range of long-stem standard platinum resistance thermometer. The results show that the accuracy is obvious difference when the bridge works in different frequency. When the frequency is 25Hz, the maximum measurement deviations in the calibration of RTU and RBC are about 0.01mK and 0.06 mK. When the frequency is 75 Hz, the maximum measurement deviations of the calibration are about 0.08mK and 0.2mK, and it has made significant drift compared to that of the factory. Differences in accuracy is very small when the bridge works at different output current, less than 15μK. The results using RTU and RBC to calibrate F900 can confirm each other, and provide data to the uncertainty evaluation in reproduction process of the fixed-point temperature reference.
|
Received: 12 June 2015
Published: 22 March 2016
|
|
|
|
|
[1]Preston-Thomas H, Quinn T J . The International Temperature Scale of 1990(ITS-90) [J]. Ibid, 1990, 27(1): 3-10.
[2]White D R, Ballico M, Chimenti V, et al. Uncertainties in the Realisation of the SPRT Subranges of the ITS-90 [J].International Journal of Thermophysics, 2009, 28(6):1868-1881.
[3]White D R. A method for calibrating resistance thermometry bridges[C]//Proc Tempmeko 1996, Torino, Italy,1996.
[4]White D R. Contribution of Uncertainties in Resistance Measurements to Uncertainty in ITS-90[C]//Temperature: Its Measurement and Control in Science and Industry, Chicago,USA,2002.
[5]Strouse G F,Hill K D. Performance Assessment of Resistance Ratio Bridges Used for the Calibration of SPRTs//Temperature: Its Measurement and Control in Science and Industry, Chicago,USA,2002.
[6]Rudtsch S, Ramm G, Heyer D, et al. Comparison of Test and Calibration Methods for Resistance Ratio Bridges[C]// Proc TEMPMEKO 2004, Cavtat-Dubrovnik,Croatia,2004.
[7]Joung W, Gam K S, Yang I, et al. Uncertainty assessment of resistance thermometry bridges[C]//20th IMEKO World Congress, Busan, Korea, 2012.
[8]Walker R. Automatic Linearity Calibration in a Resistance Thermometry Bridge[J].International Journal of Thermophysics, 2011, 32(1-2): 215-223. |
|
|
|