|
|
Study on the Technology of Standard Force Generating Device with Double Levers and Changeable Lever Ratio |
ZHANG Xue-cheng1,TANG Chun-qian2 |
1.Jilin University, Chuangchun, Jilin 130022, China
2.National Institute of Measurement and Testing Technology, Chengdu, Sichuan 610021, China |
|
|
Abstract A loading way and a device with double levers and a changeable lever ratio is introduced. The device is composed of two levers, one main lever and one ministrant lever. According to the changeable lever ratio principle, force is applied by the main lever while the ministrant lever maintain the initial balance of the entire system. The changeable lever ratio principle indicates that the lever ratio alters via an individual weight moving alone the lever arm. The force applies to the specimen because of the lever ratio alternation. That is, the variational force is applied through controlling the position of the weight. The system restores balance after loading. With the loading method mentioned above, the operation of such device would be simple and the balance state is adjusted naturally at zero. The system force control is realized by precise displacement change, such method results to much wider force value and fewer errors. The frequency of weight move decides the speed of force application, therefore, this device enhances the loading efficiency. The basic principle of the machine is presented in details and the errors analyzed as well. Furthermore, an experiment to a 1MN force standard machine which applies such techniques was conducted. Data and test result are also included . The force value accuracy class 0.01 is achievable according to the test result.
|
Received: 08 February 2014
Published: 27 January 2016
|
|
Corresponding Authors:
Xue-cheng ZHANG
E-mail: zxche@163.com
|
|
|
|
[1]裴玉吉.天平[M].北京:中国计量出版社,1993,9-23.
[2]施昌彦.现代计量学概论[M].北京:中国计量出版社,2003,101-122.
[3]李庆忠.负荷传感器检定测试技术[M].北京:中国计量出版社,1990,46-115.
[4]蔡正平,邹炳易,施昌彦,等.电子称重技术与测力计量的最新进展[M].北京:中国计量出版社,1986,205-229.
[5]周兆丰.测力硬度计量简明手册[M].北京:国防工业出版社,1987,190-222.
[6]张学成,王鹏.变臂比杠杆式精密力源技术问题研究[J].计量学报,2009,30(1):49-52.
[7]Kah L C, Glckner B, Thomas A. New Developments in Lever-amplified Force Standard Machines[C]//XVII IMEKO World Congress, Dubrovnik, Croatia, 2003, 319-323. |
|
|
|