|
|
Application Status of Nondestructive Testing Technology Based on the Barkhausen Effect |
YUAN Hui-juan1,FU Jian1,LI Hong-mei 2,LI Jun-zhong1, JIANG Xue1,YANG Ying1,ZHANG En-jing1 |
1.The Higher Educational Key Laboratory for Measuring & Control Technology and Instrumentations of Heilongjiang Province, Harbin University of Science and Technology, Harbin, Heilongjiang 150080, China
2.AVIC Harbin Bearing Corporation Ltd, Harbin, Heilongjiang 150025, China |
|
|
Abstract Nondestructive testing technology based on the Barkhausen effect can be used to detect stress, hardness, grain size, grinding burn etc., it gets the attention because of its advantages, such as rapid, not-destructive and quantitative.The research status of Barkhausen effect is reviewed. Its application situation were investigated that the nondestructive testing technology based on the Barkhausen effect on stress, hardness, grain size, grinding burn detection etc., and the relationship between the MBN signals and stress, hardness, grain size, grinding burn were showed.The key points to design the MBN sensor are described.
|
Received: 28 January 2014
Published: 10 December 2015
|
|
|
|
|
[1]Barkhausen H. Two phenomena revealed with the help of new amplifiers[J].Physics Z, 1919, 20: 401-403.
[2]Durin G, Zapperi S. The Barkhau-sen effect[R/OL][2004-04-21]http://arxiv.org/pdf/cond-mat/0404512.
[3]Pal’a J,Stupakov O,Bydzoysky J,et al.Magnetic behaviour of low-carbon steel in parallel and perpendicular directions to tensile deformation[J].Journal of Magnetism and Magnetic Materials, 2007, 310: 57-62.
[4]Stefanita C G,Atherton D L,Clapham L.Plastic versus elastic deformation effects on magnetic Barkhausen noise in steel[J].Elsevier Science Acta Material, 2000, 48(13): 3545-3551.
[5]Sorsa A, Leiviska K, Santa-aho S,et al.Quantitative prediction of residual stress and hardness in case-hardened steel based on the Barkhausen noise measurement[J].NDT & E International, 2012(46): 100-106.
[6]Inaguma T, Sakamoto H, Hasegawa M. Stress Dependence of Barkhausen Noise in Spheroidized Cementite Carbon Steel[J].IEEE Transactions on Magnetics, 2013, 49(4): 1310-1317.
[7]Kypris O, Nlebedim I C, Jiles D C.A New Method for Obtaining Stress-Depth Calibration Profiles for Non-Destructive Evaluation Using a Frequency-Dependent Model of Barkhausen Emissions[J].IEEE Transactions on Magnetics, 2013, 49(7): 3893-3896.
[8]祈欣, 陈娟, 刘殿魁,等.利用近饱和磁化产生的巴克豪森效应测量铁磁件二轴应力[J].计量学报, 1999, 20(1): 11-16.
[9]唐德东, 黄尚廉, 陈伟民.磁弹效应索力传感器的温度影响机理及补偿技术研究[J].仪器仪表学报, 2007, 8(28): 1353-1357.
[10]Ranjan R, Jiles D C, Buck O,et al.Grain size measurement using magnetic and acoustic Barkhausen noise[J]. Journal of Applied Physics, 1987, 61(8): 3199-3201.
[11]Zerovnik P, Grum J, Zerovnik G. Determination of Hardness and Residual-Stress Variations in Hardened Surface Layers With Magnetic Barkhausen Noise[J]. IEEE Transactions on Magnetics, 2010, 46(3): 899-904.
[12]Henager C H, McCloy J S, Ramuhalli P, et al. Pradeep Ramuhalli, Investigation of magnetic signatures and microstructures for heat-treated ferritic/martensitic HT-9 alloy[J].Acta Materialia, 2013,61(9):3285-3296.
[13]田建龙, 祁欣, 刘竞业.磁弹硬度检测仪的研制[J].仪器仪表学报, 2002, 23(6): 639-640.
[14]Ceurter J S, Smith C, Ott R. Barkhausen noise inspection[J]. Advanced Materials and Processes, 2002, 160(4): 29-31.
[15]Cap-Snchez J, Padovese L. Magnetic Barkhausen noise measurement by resonant coil method[J].Journal of Magnetism and Magnetic Materials, 2009, 321(18): 57-62. |
|
|
|