|
|
|
| Study on the Key Technology of Hot Rolling Heavy Rail Surface Faults of Online Detecting and Recognition |
| XIE Zhi-jiang, XIE Chang-gui |
| State Key Lab of Mechanical Transmissions, Chongqing University, Chongqing 400044, China |
|
|
|
|
Abstract In currently hot rolling heavy rail surface faults detecting, speed is slow and its precision is low.So a suit of surface defect detection system for hot rolling heavy rail based on the machine vision is produced. Too dark and sun regional overlapping fusion method and image correlation between pixel lines algorithm is analysised,and a fuzzy spiking neural network used to make a classification for the characteristics of low SVM training algorithm is researched.Using above key machine vision technology for detection of hot heavy rail surface defects identification, the speed and accuracy of online testing can be greatly improved, and the detection correction rate is over than 90%.
|
|
|
|
|
|
[1] 王凌云,黄红辉,王雪.重轨表面缺陷机器视觉检测的关键技术[J].重庆大学学报(自然科学版),2007,30(9):27-31.
[2] 张洪涛,段发阶,丁克勤,等.带钢表面缺陷视觉检测系统关键技术研究[J].计量学报,2007,28(3) :216-219.
[3] 胡亮,段发阶,丁克勤,等.基于线阵CCD钢板表面缺陷在线检测系统的研究[J].计量学报,2005,26(3):200-203.
[4] Bassiou N,Kotropoulos C.Color image histogram equalization by ab-solute discounting back-off[J]. ComputerVision and Image Under-standing, 2007,107(1-2): 108-122.
[5] 韩思奇,王蕾.图像分割的阈值法综述[J].系统工程与电子技术,2002,24(6):91-94.
[6] 谢志江,陈涛,楚红雨,等.热态重轨表面缺陷在线检测方法及关键技术[J].重庆大学学报,2012,35(3):15-18.
[7] 王凤朝,刘兴堂,黄树采. 基于模糊证据理论的多特征目标融合检测算法[J].光学学报,2010,30(3):713-717.
[8] 张学武,燕琼,闫萍.一种基于红外成像的强反射金属表面缺陷视觉检测方法[J].光学学报,2011,31(3):1-8.
[9] Kubota N,Sasaki H.Genetic algorithm for a fuzzy spiking neural network of a mobile robot[C]//CIRA 2005, International Symposium on Computational Intelligence in Robotics and Automation,Espoo,Finland,2005:2410-2415. |
|
|
|
2014, Vol. 35 
