|
|
Prediction of Calibration Interval for Measuring Instrument Using Fuzzy Norm Fusion Model |
SUN Qun1,ZHAO Ying1,WANG Guo-hua2 |
1.School of Automobile and Transportation Engineering, Liaocheng University, Liaocheng,Shandong 252059, China
2. School of Instrumentation Science & Opto-electronics Engineering, BUAA, Beijing 100191, China |
|
|
Abstract Prediction of the measuring instrument calibration interval is a main method to solve insufficient calibration and surplus calibration. Those used prediction models at present only focus on prediction of the instantaneous value. However, the instantaneous value is tough to be predicted precisely due to random factors. For these problems, a fuzzy norm fusion model is proposed to predict calibration intervals under small sample of calibration data. The mathematic model of calibration data is founded, by analyzing historical calibration data and corresponding effect factors. Base on this work, the fuzzy norm fusion model is adopted to predict calibration intervals. The fuzzy norm fusion model conquers the deficiency, which other prediction models only predict the instantaneous value. Experiments show that the fuzzy norm fusion model could reflect the change trend of the system better and have higher prediction reliability.
|
|
|
|
|
|
[1]ISO. ISO 10012, Measurement management systems-Requirements for measurement processes and measuring equipment [S]. 2003.
[2]国家质量监督检验检疫总局. GB/T 19022.1.—1994, 测量设备的质量保证要求第1部分: 测量设备的计量确认体系[S]. 1994.
[3]余学锋, 王亚梅, 田建柱. 测量设备校准间隔确定方法工程化应用与发展[J]. 中国测试, 2009, 35(4): 15-18.
[4]Carbone P. Performance of simple response method for the establishment and adjustment of calibration intervals[J].IEEE Transactions on Instrumentation and Measurement, 2004, 53(3): 730-735.
[5]谢少锋, 钱成, 文海. 测量仪器校准间隔的确定及其模型 [J]. 计量学报, 2002, 23(1): 74-77.
[6]苏海涛, 杨世元, 董华,等. 计量器具检定周期灰色动态模型及应用研究[J]. 应用科学学报, 2007, 25(1): 81-84.
[7]Lin Kuo-huang, Liu Bin-da. A gray system modeling approach to the prediction of calibration intervals[J]. IEEE Transactions on Instrumentation and Measurement, 2005, 54(1): 297-304.
[8]赵瑞贤, 孟晓风, 王国华. 基于灰色马尔柯夫预测的测量仪器校准间隔动态优化[J]. 计量学报, 2007, 28(2): 184-187.
[9]田旭光, 蔡金燕. 基于灰色预测理论的测量仪器校准周期的确定[J]. 自动化仪表, 2007, 28(12): 12-14,18.
[10]孙群, 赵颖, 孟晓风. 基于灰色组合模型的校准间隔优化仿真[J]. 系统仿真学报, 2008,20(9): 2296-2299.
[11]刘如峰; 李世平; 文超斌,等. 基于线性趋势模型与LSSVM的校准间隔组合预测[J]. 传感器与微系统, 2010, 29(9): 61-66.
[12]夏新涛, 陈晓阳, 张永振,等. 基于乏信息的滚动轴承振动与噪声的模糊预报[J]. 吉林大学学报(工学版), 2007, 37(6): 1341-1345.
[13]夏新涛, 贾晨辉, 王中宇. 滚动轴承摩擦力矩的乏信息模糊预报[J]. 航空动力学报, 2009, 24(4): 945-950.
[14] 夏新涛, 陈晓阳, 张永振,等. 滚动轴承乏信息试验分析与评估[M]. 北京: 科学出版社, 2007. |
|
|
|