|
|
Hardware Technology of High Accuracy Measurement System for Ocean Tide Based on Image Processing |
JIA Wei-guang1,JI Jian-hua2,MA Zhi-gang1,SI Jian-wen1,LI Xi-ling1,LIU Xiao-feng1 |
1. National Center of Oceanographic Standards and Metrology, Tianjin 300112, China;
2. Department of Information Engineering, Tianjin University Ren’ai College, Tianjin 301636, China |
|
|
Abstract In order to further enhance the measurement and evaluation level of the ocean tide, an introduction of digital image processing and digital signal processor technology in the field is usel. Using DM642 as the core processor, this can have a design of video capture circuit, encoding and decoding circuit, external memory module circuit, hard simulation through JTAG simulation interface, to realize analog/digital conversion, and data transmission functions. At the same time, system software design can ensure that DM642 can achieve the purpose of real-time processing tide video by CCD, and the realization of real time display of tidal level video and high accuracy data. The system can meet the requirements of high precision, real-time tide detection and automation. The tide variation range of detection is 0~8 m, and the maximum error of indication is 1.2 mm, and the measurement maximum standard deviation can less than 0.42 mm.
|
|
|
|
|
[1]张龙,史建,李彦,等.用于亚硫酸根氧化速率测量的图像处理方法[J].计量学报,2003,24(2):154-157.
[2]王学影,张洪涛.基于图像处理的CCD摄像机自动调焦方法研究[J].计量技术,2005,(8):16-18.
[3]李鹏辉,赵文光,朱宏平,等.基于数字图像处理技术的多点动态位移监测[J].华中科技大学学报(自然科学版),2011,39(2):80-84.
[4]易正明,鄢明,迟云广,等.基于图像处理的回转窑火焰温度测量技术研究[J].计量学报,2008,29(1):42-45.
[5]戴亚文,王三武,李金龙.基于图像处理技术复杂仪表的自动识别[J].计量技术,2003,(12):33-35.
[6]邾继贵,邹剑,林嘉睿,等.摄影测量图像处理的高精度误差补偿法[J].光学学报,2012,32(9):0912004(1)-0912004(8).
[7]卢慧卿,王宝光,刘力双,等.一种提取特征点线的图像处理方法[J].计量技术,2005,(2):11-14.
[8]刘丹阳,韩雅慧,王超,等.水滴撞击特性的动态图像测量方法[J].北京航空航天大学学报,2013,39(2):254-258.
[9]李洪波,赵学增,肖增文,等.一种基于图像处理的半导体刻线边缘粗糙度的确定方法[J].计量技术,2004,(9):3-5.
[10]Rao Y,Zang S H,Huang M. A liquid crystal thermography calibration with true color image processing [J]. Chinese Optics Letters,2009,7(9):795-797.
[11]黄定明,刘斌,康宜华.基于光切法和数字图像处理技术的槽深测量[J].计量技术,2007,(11):6-8. |
|
|
|