Acta Metrologica Sinica  2015, Vol. 36 Issue (4): 428-431    DOI: 10.3969/j.issn.1000-1158.2015.04.20
Current Issue | Archive | Adv Search |
Method of the High-voltage Fast Edge Signal Generation for High-voltage Probe Calibration
ZHAN Guo-zhong,PAN Yang,SHI Bin,DAI Dan
Shanghai Institute of Measurement and Testing Technology, Shanghai 201203, China
Download: PDF (1097 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  In view of the fast pulse signal amplitude is too low to measure the rise-time parameter of high-voltage probe, a method of the high-voltage fast edge signal generation is proposed. The method is based on the pulse-forming principle with a single transmission line. A rectangular wave is generated on a matched impedance through the transmission of the high-voltage pulse signal in the line. The test results show that the rectangular wave amplitude can reach 2 kV and the front rise-time is less than 500 ps. By measuring the rise-time parameters of two high-voltage probes, the experimental results prove that the high-voltage pulse signal generated by this method is applicable for high-voltage probe calibration.
Key wordsMetrology      High-voltage probe      Fast edge      Rise-time      Calibration     
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
ZHAN Guo-zhong
PAN Yang
SHI Bin
DAI Dan
Cite this article:   
ZHAN Guo-zhong,PAN Yang,SHI Bin, et al. Method of the High-voltage Fast Edge Signal Generation for High-voltage Probe Calibration[J]. Acta Metrologica Sinica, 2015, 36(4): 428-431.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2015.04.20     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2015/V36/I4/428
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech