Acta Metrologica Sinica  2014, Vol. 35 Issue (1): 18-24    DOI: 10.3969/j.issn.1000-1158.2014.01.05
Current Issue | Archive | Adv Search |
Error Separation Techniques for Aero-engine Blade Surface Based on the Measurement of CMM
LIN Xiao-jun,LIU Xiang-zhu,GUO Yan,CUI Dong-peng,FAN Ning-jing
The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China
Download: PDF (1097 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract   Aiming at the key problem for measuring of coordinate measuring machine (CMM) of the aeroengine blade surface data processing, a kind of error separation method for blade surface was proposed. The contour measurement method was used for measuring the blade, and calculation method of blade surface tolerance evaluation index, principles and procedures of the error separation techniques were given. In order to separate the curve profile error of blade surface, torsion error and position error which are from the comprehensive error to determine the blades whether were qualified, the minimum zone method was used for matching the measurement points and the theoretical cross section contour corresponding points in the data processing The matching objective function and solving steps were established and DFP variable dimension algorithm was used to solve it. The influence of establishing coordinate system error was eliminated through the second match.Finally, the examples showed the method was valid and practical.
Key words Metrology      Blade surface      Error separation      Coordinate measuring machine      Matching      Profile error     
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
LIN Xiao-jun
LIU Xiang-zhu
GUO Yan
CUI Dong-peng
FAN Ning-jing
Cite this article:   
LIN Xiao-jun,LIU Xiang-zhu,GUO Yan, et al. Error Separation Techniques for Aero-engine Blade Surface Based on the Measurement of CMM[J]. Acta Metrologica Sinica, 2014, 35(1): 18-24.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2014.01.05     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2014/V35/I1/18
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech