|
|
Multi-angle Weak Texture Cultural Relics 3D Scanning Measurement Method |
DONG Li1,JANG Wensong1,LUO Zai1,YANG Li2,LI Yaru1,BIAN Dian1 |
1. College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. College of Information Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China |
|
|
Abstract The digital reconstruction of ancient artifacts is an important analytical tool for archaeological excavations, but the structure of cultural relics with weak texture features is difficult to accurately register, resulting in significant 3D reconstruction errors. A three-dimensional reconstruction method based on complementary Gray code phase shift method is proposed to address this issue, and multi-angle point cloud registration is completed with the assistance of a turntable. Firstly, establish a binocular turntable pose transformation model and complete system calibration; Secondly, during the scanning process, the complementary Gray code phase shift method is used to obtain high-quality phase information, and single point cloud data is obtained through epipolar correction and stereo matching; Finally, the multi-angle stitching method of precision turntable is used to achieve the combination of point cloud images in various directions, and to construct a complete three-dimensional point cloud image of cultural relics. An experimental verification platform is built to verify the effectiveness of the method. The experimental results show that the error of the proposed algorithm is less than 0.11mm, and the error of the depth camera method is 6.96mm, which is 63.27 times larger than the error of the method proposed. It proves that the method proposed has advantages in building weak texture feature objects, and at the same time, the application of the turntable also achieved multi-angle 3D reconstruction of uniformly symmetric objects.
|
Received: 26 July 2023
Published: 06 June 2024
|
|
|
|
|
[9] |
延瑜瑜. 多角度兵马俑图像的三维重建方法研究[D]. 西安: 西北大学, 2018.
|
[12] |
毛翠丽, 卢荣胜, 董敬涛, 等. 相移条纹投影三维形貌测量技术综述[J]. 计量学报, 2018, 39(5): 628-640.
|
[16] |
耿国华, 张鹏飞, 刘雨萌, 等. 基于断裂面邻域特征的文物碎片拼接[J]. 光学精密工程, 2021, 29(5): 1169-1179.
|
[3] |
宋俊芳, 孙彬, 蒲媛媛,等. 基于激光点云数据的叶片型面三维重构[J]. 计量学报, 2023, 44(2): 171-177.
|
[8] |
屠大维, 兰浩, 张曦. 文物数字化三维重建技术研究[J]. 激光与光电子学进展, 2019, 56(19): 196-202.
|
[6] |
陈辉, 杨剑, 黄晓铭, 等. 基于多视图立体视觉的沙堆三维尺寸测量研究[J]. 计量学报, 2019, 40(3): 403-408.
|
[10] |
张英哲. 基于轮廓线的文物CT图像三维建模研究[D]. 西安: 西北大学, 2022.
|
[14] |
张启灿, 吴周杰. 基于格雷码图案投影的结构光三维成像技术[J]. 红外与激光工程, 2020, 49(3): 78-90.
|
|
SONFG J F, SUN B, PU Y Y, et al. Three-dimensional reconstruction of blade profile based on laser point cloud data [J]. Acta Metrologica Sinica, 2023, 44(2): 171-177.
|
|
LIU S, ZHEN X S, YANG B, et al. Research on thickness measurement method of nuclear power heat exchanger plate based on line laser scanning [J]. Acta Metrologica Sinica, 2022, 43(12): 1561-1567.
|
|
LANG W, XUE J P, LI C H, et al. Multi-view point cloud stitching is realized based on the parameter calibration of the rotating table [J]. Chinese journal of lasers, 2019, 46(11): 238-245.
|
|
GEN G Q, ZHANG P F, LIU Y M, et al. Cultural relics fragment stitching based on the neighborhood characteristics of fracture surfaces [J]. Optics and Precision Engineering, 2021, 29(5): 1169-1179.
|
[4] |
刘杰, 郑雪松, 杨斌,等. 基于线激光扫描的核电换热板厚度测量方法研究[J]. 计量学报, 2022, 43(12): 1561-1567.
|
|
TU D W, LAN H, ZHANG X. Research on digital three-dimensional reconstruction technology of cultural relics [J]. Laser & Optoelectronics Progress, 2019, 56(19): 196-202.
|
|
ZHANG Q C, WU Z J. Structured light 3D imaging technology based on Gray code pattern projection [J]. Infrared and Laser Engineering, 2020, 49(3): 78-90.
|
[1] |
EVGENIKOU V, GEORGOPOULO A. Investigating 3D reconstruction methods for small artifacts [J]. isprsarchives, 2015, 40(5): 101-108.
|
[2] |
LIU E, CHENG X, CHENG X, et al. Application of Three-Dimensional Laser Scanning in the Protection of Multi-Dynasty Ceramic Fragments [J]. IEEE Access, 2020, 8: 139771-139780.
|
[5] |
DESU H, GOTHANDARAMAN R, MUTHUSWAMY S. 3D Digital Reconstruction of Heritage Artifacts: Parametric Evaluation[C]//2018 Tenth International Conference on Advanced Computing (ICoAC), Chennai, India, 2018.
|
|
CHEN H, YANG J, HUANG X M. Research on 3D dimensional measurement of sand pile based on multi-view stereo vision [J]. Acta Metrologica Sinica, 2019, 40(3): 403-408.
|
[7] |
ZHAO G, QIU Z, SHEN J, et al. Internal structural imaging of cultural wooden relics based on three-dimensional computed tomography [J]. BioRes, 2018, 13(1): 1548-1562.
|
[11] |
HU S, LI Z, WANG S, et al. A Texture Selection Approach for Cultural Artifact 3D Reconstruction Considering Both Geometry and Radiation Quality [J]. Remote Sensing, 2020, 12(16): 2521.
|
|
MAO C L, LU R S, DONG J C, et al. A review of three-dimensional topography measurement techniques of phase shift fringe projection [J]. Acta Metrologica Sinica, 2018, 39(5): 628-640.
|
[13] |
ZHANG S, HUANG H. Step Surface Profile Measurement Based on Fringe Projection Phase-Shifting Using Selective Sampling [J]. Photonics, 2021, 8(12): 592.
|
[15] |
郎威, 薛俊鹏, 李承杭, 等. 基于旋转台参数标定实现多视角点云拼接[J]. 中国激光, 2019, 46(11): 238-245.
|
|
|
|