|
|
Study on Internal Defect Detection Technology of Billet Based on Ultrasonic Tomography |
LIU Huihe1,ZHENG Huifeng1,TANG Jiaxuan1,YAO Lei2 |
1. China Jiliang University, Hangzhou 310018, China
2. Key Laboratory of Acoustics and Vibration Precision Measuring Technology for State Market Regulation, Hangzhou, Zhejiang 310018, China |
|
|
Abstract To achieve accurate detection of internal defect morphology in billets, a priori knowledge-based ultrasonic tomographic imaging method is proposed. Firstly, the principle of fusing prior knowledge into ultrasonic tomographic imaging is elaborated, and the shortest path ray tracing method is used to improve the ultrasonic tomographic imaging. Then, the feasibility of the method is verified through finite element simulation analysis, and the acquisition scheme is discussed to determine the relevant detection parameters. Finally, an experimental detection system is built, and related validation experiments are conducted. Through processing and analyzing the imaging results of defect distribution, the results show that for the single pore defect specimen, the relative error of pore contour area is 2.84% with small position error. For the double-hole defective test block, the relative error is 5.45%, in which the hole far away from the transmitting probe has a larger position error. The method provides an idea and method for the application of ultrasonic tomography technology.
|
Received: 10 May 2023
Published: 23 May 2024
|
|
|
|
|
[2] |
郭成彬, 黄振俨. 多晶金属中结构嗓声的传输速度[J]. 声学学报, 1997, 34(1): 22-27.
|
|
DING H, LI X, WANG Z, et al. Ultrasonic nondestructive testing and characterization of internal defects of casting billet[J]. Steelmaking, 2019(3): 47-53.
|
|
GUO C B, HUANG Z J. Transmission speed of structural voice in polycrystalline metals[J]. Acta Acoustica Sinica, 1997, 34(1): 22-27.
|
|
FANG L D, KONG H Z, HAN B B, et al. Gas-liquid interface detection based on array ultrasonic sensor[J]. Journal of Metrology, 2022, 43(12): 1616-1621. )
|
[5] |
王浩全. 超声阵列层析成像检测方法研究[D]. 太原: 中北大学, 2011.
|
|
LIU C, WANG L, CHANG M, et al. Ultrasound computed tomography[J]. Beijing Biomedical Engineering, 2002, 22(2): 152-155.
|
[11] |
兰从庆. 水浸式超声检测成像系统研制成功[J]. 应用声学, 1999, 18(4): 40.
|
[12] |
乔灵博, 李亮, 陈志强. 基于多重网格的 SIRT 加速算法[J]. CT 理论与应用研究, 2013, 27(1): 25-32.
|
[13] |
刘玲君, 谢中华, 杨萃. 基于边界线性走时插值的射线追踪算法[J]. 华南理工大学学报(自然科学版), 2014, 42(5): 23-28.
|
[15] |
RADON J. On the Determination of Functions from Their Integral Values along Certain Manifolds[J]. IEEE Trans Med Imaging, 1986, 5(4): 170-176.
|
[1] |
马俊. 超声无损检测技术在金属材料焊接缺陷检测中的应用[J]. 中国金属通报, 2019(3): 195-196.
|
[7] |
VRANA J, SCHRNER K, MOOSHOFER H, et al. Ultrasonic Computed Tomography-Pushing the Boundaries of the Ultrasonic Inspection of Forgings[J]. steel research international, 2018, 89(4): 1700448.
|
|
LIU L J, XIE Z H, YANG C. Ray tracing algorithm based on boundary linear time interpolation[J]. Journal of South China University of Technology (Natural Science Edition), 2014, 42(5): 23-28.
|
[3] |
方立德, 孔恒正, 韩棒棒, 等. 基于阵列超声传感器的气液界面检测[J]. 计量学报, 2022, 43(12): 1616-1621.
|
[4] |
GUPTA M, KHAN M A, BUTOLA R, et al. Advances in applications of Non-Destructive Testing (NDT): A review[J]. Advances in Materials and Processing Technologies, 2022, 8(2): 2286-2307.
|
[10] |
NOROSE Y, MIZUTANI K, WAKATSUKI N. Application of ultrasonic computerized tomography using time-of-flight measured by transmission method to nondestructive inspection for high-attenuation billets[J]. Japanese Journal of Applied Physics, 2014, 53(7S): 7-19
|
|
LAN C Q. Successful development of underwater ultrasonic detection imaging system[J]. Journal of Applied Acoustics, 1999, 18(4): 40.
|
[16] |
PRYOR R W. Multiphysics modeling using COMSOL: a first principles approach[M]. Sudbury: Jones & Bartlett Publishers, 2009.
|
|
MA J. Application of ultrasonic nondestructive testing technology in welding defect detection of metal materials[J]. China Metals Bulletin, 2019(3): 195-196.
|
[6] |
刘超, 王理, 昌明, 等. 超声计算机层析成像技术[J]. 北京生物医学工程, 2002, 22(2): 152-155.
|
[8] |
DOI T, MIYAMOTO R, WAKATSUKI N, et al. Transmission detection of internal defects in billets using shear ultrasonic waves[J]. Japanese Journal of Applied Physics, 2022, 61(SG): SG1039.
|
[9] |
丁恒, 李雪, 王柱, 等. 铸坯内部缺陷的超声无损检测与表征[J]. 炼钢, 2019 (3): 47-53.
|
|
QIAO L B, LI L, CHEN Z Q. SIRT Acceleration Algorithm Based on Multiple Grids[J]. CT Theory & Applied Research, 2013, 27(1): 25-32.
|
[14] |
姚波, 温秀兰, 焦良葆, 等. 改进YOLOv3算法用于铝型材表面缺陷检测[J]. 计量学报, 2022, 43(10): 1256-1261.
|
|
YAO B, WEN X L, JIAO L B, et al. Improved YOLOv3 algorithm for surface defect detection of aluminum profiles[J]. Acta Metrology Sinica, 2022, 43(10): 1256-1261. )
|
|
|
|