|
|
Research on Measurement of Fried Dough Twists Drill Edge Band Width Based on LM Method |
ZHOU Zheng1,TAI Ligang1,CHEN Zhiyuan2,ZHANG Yu1 |
1. School of Mechanical Engineering,Shenyang University of Technology,Shenyang, Liaoning 110870,China
2. Shenyang Municipal Group,Shenyang Municipal Group Corporation,Shenyang, Liaoning 110026,China |
|
|
Abstract A detection method of twist drill blade width based on binarization is proposed. Firstly, the target edge is sharpened, and then the edge information is extracted by Butterworth high-pass filtering. Secondly, through the improved Otsu binarization algorithm, the suspected edge points are threshold segmentation and the coordinates of the edge points are obtained. Again, the Levenberg-Marquardt(LM) method is used to fit the points near the edge, so as to get the edge band width curve and its inflection point, and get the data of edge band width of twist drill. Finally, the contrast experiment is carried out, and the untreated M35 blade image with a diameter of 2.5cm is processed by LM method, the blade width is 1.467mm, and the measurement error is 0.467mm.. The improved measurement result is 0.853mm and the measurement error is 0.147mm.
|
Received: 11 July 2023
Published: 03 April 2024
|
|
|
|
|
[3] |
邾继贵 于之靖. 视觉测量原理与方法[M]. 北京: 机械工业出版社, 2011.
|
[10] |
李猛坤, 柯正轩, 于定荣, 等. 基于移动边缘计算的车联网车牌号码识别算法[J]. 计算机工程与设计, 2021, 42(11): 3151-3157.
|
[16] |
岳亚伟. 数字图像处理与Python实现[M]. 北京: 人民邮电出版社, 2020.
|
[14] |
程颖, 李晓凡, 朱宁. 基于机器视觉的刀具轮廓在线检测方法的研究[J]. 光学技术, 2020, 46(2): 167-172.
|
[4] |
胡立昂, 吴海妹, 黄俊杰. 一种检查麻花钻头手工磨角度的可调刀口角度尺: 中国, A: CN211926728[P].2020-06-11
|
[2] |
ZHOU J J, YU J B. Chisel edge wear measurement of high-speed steel twist drills based on machine vision [J]. Computers in Industry, 2021, 128:2-4.
|
[7] |
王梓任. 基于边缘检测和语义分割的海面溢油区域识别算法研究[D]. 秦皇岛: 燕山大学, 2022..
|
[11] |
沈少伟, 颜树华, 周春雷, 等. 基于CCD视觉的螺纹参数自动检测技术研究[J]. 半导体光电, 2007(6): 865-869.
|
[5] |
周斌, 虞文武, 蒋庆斌, 等. 一种半自动麻花钻检测装置: 中国, A: CN111220046[P].2020-06-02
|
[9] |
XU X Y, SHI P X, ZHOU X Q, et al. A novel vision measurement system for health monitoring of tunnel structures[J]. Mechanics of Advanced Materials and Structures, 2022, 29(15): 2208-2218.
|
[12] |
YANG S, WANG J, SHI L, et al. Engineering management for high-end equipment intelligent manufacturing [J]. Frontiers of Engineering Management, 2018, 5(4): 420-450.
|
[13] |
李晓辉. 并联机器人双目主动视觉平台刀具定位及位姿检测研究[D]. 秦皇岛: 燕山大学, 2010.
|
|
CHENG Y, LI XF, ZHU N. Research on on-line detection method for tool profile base on machine vision [J]. Optical technology, 2020, 46(2): 167-172.
|
|
FAN Y Q, LI Y M, ZHANG T, et al. Research on the height measurement method of blowout liquid column based on machine vision [J]. Laser magazine, 2023, 44(1): 22-26.
|
[18] |
OTSU N. A threshold selection method from gray-level histograms[J]. IEEE transactions on systems, man, and cybernetics, 1979, 9(1): 62-66.
|
[1] |
HE B, HE Y, XUE R, et al. High-precision automatic measurement of two-dimensional geometric features based on machine vision[J]. Journal of Southeast University, 2012, 28(4): 428-433.
|
[8] |
杨艳军. 基于视觉特性的图像增强与边缘检测算法研究[D]. 成都: 成都理工大学, 2018.
|
|
LI M Q, KE Z X, YU D R, et al. Vehicle license plate number recognition algorithm based on mobile edge calculation[J]. Computer engineering and design, 2021, 42(11): 3151-3157.
|
|
SHEN S W, YAN S H, ZHOU C L, et al. Research of Automatic Detection Technology of Thread Parameters Based on CCD Vision [J]. Semiconductor photoelectricity,. 2007(6): 865-869.
|
[15] |
范英琪, 李玉梅, 张涛, 等. 基于机器视觉的井喷液柱高度测量方法研究[J]. 激光杂志, 2023, 44(1): 22-26.
|
[17] |
KORAY S E. Adaptive usage of the Butterworth digital filter[J]. Journal of Biomechanics, 2007, 40(13): 2934-2943.
|
[19] |
LOURAKIS M I A. A brief description of the Levenberg-Marquardt algorithm implemented by levmar[J]. Foundation of Research and Technology, 2005, 4(1): 1-6.
|
[6] |
LI W, SINGH M H, GUO B Y. An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy [J]. The International Journal of Advanced Manufacturing Technology, 2013, 67:1067-1077.
|
|
|
|