|
|
The Influence of Inducing Methods on the Zinc Freezing Plateaus |
HU Ziliang1,YAN Xiaoke2,XIONG Yaxuan1,ZHANG Mingyu2 |
1. Beijing Key Lab of Heating, Gas Supply, Ventilating and Air Conditioning Engineering, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
2. National Institute of Metrology, Beijing 100029, China |
|
|
Abstract The zinc freezing point is the defining fixed-point of the International Temperature Scale of 1990 (ITS-90). Also, it is an important reference point for calibrating standard platinum resistance thermometers (SPRT). In order to improve the level of realization of the zinc freezing point, the zinc fixed point cell with metal shell was used to study the influence of different inducing methods on the zinc freezing plateaus and supercoolings. The Overall Maximum Estimate (OME) method was adopted to determine the impurity concentration. The reliability of the cell was evaluated using the changes of the impurity concentrations and the differences between the melting plateaus and freezing plateaus. The results showed that the zinc fixed point cell with metal shell had good reliability; under different induction times, the value of zinc freezing plateaus obtained by using quartz, stainless steel and nickel inducation rods was consistent in the range of 0.15 mK, that is, the different inducing methods can obtain good zinc freezing plateaus; and the inducing methods had no effect on the supercoolings of high purity zinc.
|
Received: 14 November 2022
Published: 03 April 2024
|
|
|
|
|
[1] |
PRESTON-THOMAS H. The International Temper-ature Scale of 1990 (ITS-90) [J]. Metrologia, 1990, 27 (2): 107.
|
[4] |
王宁, 闫小克, 张明宇, 等. 高精度复现铟凝固点 [J]. 计量学报, 2021, 42 (5): 582-588.
|
[2] |
STROUSE G F. Small Fixed-Point Cells for Use in Dry Well Block Calibrators [R]. Institute for Telecommunication Sciences FY 2007 Technical Progress Report, 2008.
|
[5] |
邱萍,闫小克,汪洪军,等. 金属外壳水三相点容器[J]. 计量学报, 2022, 43(2): 196-200.
|
[8] |
标准铂电阻温度计检定规程:JJG 160—2007[S].北京:中国质检出版社,2007.
|
[15] |
LEE H K, GAM K S, RHEE C. Realization of the Indium Freezing Point [J]. Metrologia, 2005, 28 (5): 413-417.
|
[3] |
LI X M, ZHAO M J, CHEN D M. Realization of the Freezing Points of Indium, Tin and Zinc Using Stainless Steel-Cased Cells [C]// 9th International Symposium on Temperature and Thermal Measurements in Industry and Science. 2004.
|
|
WANG N, YAN X K, ZHANG M Y, et al.Highly Precise Realization of the Indium Freezing Point[J]. Acta Metrologica Sinica, 2021, 42 (5): 582-588.
|
|
QIU P,YAN X K,WANG H J,et al. Triple Point of Water Cells with Metal Containers[J]. Acta Metrologica Sinica, 2022, 43(2): 196-200.
|
|
HE P, LIN L, YAN X K, et al. Study on the Realization of Aluminum Freezing Point in the Three-zone Temperature Controlled Fixed Point Furnance [J]. Acta Metrologica Sinica, 2021, 42 (3): 321-326.
|
[9] |
STROUSE G F. Standard Platinum Resistance Thermometer Calibrations From the AR TP to the Ag FP [R]. NIST Special publication, 2008.
|
[11] |
LOPARDO G D, DEMATTEIS R, STEUR P P M. Characterization of a New Zinc Fixed-Point Cell for ITS-90 Realization [J]. International Journal of Thermophysics, 2022, 43 (7): 1-13.
|
[5] |
何沛, 林林, 闫小克, 等. 三段控温固定点炉复现铝凝固点研究 [J]. 计量学报, 2021, 42 (3): 321-326.
|
[6] |
RUDTSCH S, AULICH A. The Influence of Impurities on the Zinc Fixed Point [J]. International Journal of Thermophysics, 2017, 38 (2): 32-42.
|
[7] |
ANCSIN J. Impurity dependence of the Zn point [J]. Metrologia, 2007, 44 (5): 303-307.
|
[13] |
WIDIATMO J V, SAKAI M, SATOU K, et al. Study on the Realization of Zinc Point and the Zinc-Point Cell Comparison [J]. International Journal of Thermophysics, 2011, 32 (1-2): 309-325.
|
[14] |
DING R, ZHAO M J, CABANA D, et al. Comparison Between Melting and Freezing Points of Indium and Zinc [J]. NCSLI Measure, 2008, 3 (1): 70-74.
|
[16] |
马幼平, 崔春娟. 金属凝固理论及应用技术 [M]. 北京: 冶金工业出版社, 2015.
|
[10] |
ZVIZDIC D, VELIKI T, BERMANEC L G. Realization of the temperature scale in the range from 234.3 K (Hg triple point) to 1084.62℃ (Cu freezing point) in croatia [J]. International Journal of Thermophysics, 2008, 29 (3): 984-90.
|
[12] |
FELLMUTH B, HILL K D, PEARCE J V, et al. Fixed Points: Influence of Impurities [R]. Guide to the Realization of the ITS-90,2015.
|
|
|
|