|
|
Development of a Small Laser Tracking and Measuring System |
GU Chaowei1,MIAO Dongjing2,YAN Liping1,LIU Yang2,LI Jianshuang2 |
1. Nanometrics Technology Laboratory, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018,China
2. National Institute of Metrology,Beijing 100029,China |
|
|
Abstract In order to realize coordinate tracking and measuring in large size range, a small laser tracking and measuring system with small volume and light weight is developed. The mechanical structure of opto-mechatronics is designed. The optical module, mechanical structure and electronic control module are integrated to reduce the volume of the system and improve the anti-interference ability. The optical module of the system is designed, and the maximum allowable deviation of the target is increased by optimizing the optical path of the acquisition part of the target deviation based on the position sensitive detector. Through the calibration experiment of position sensitive detector, the linear interval and deviation ratio coefficient of position sensitive detector are measured, which provides key parameters for the development of tracking control algorithm. The tracking control module is designed, and the tracking control algorithm is developed to realize the fast tracking measurement of the system. The 3D visual measurement software of the system is developed to realize the real-time control of the spatial position and motion state of the system and the target. The experimental results show that the tracking stability and displacement resolution of the system are 20μm and 40μm respectively, the tracking speed of the system can reach up to 480mm/s, the acceleration can reach up to 506mm/s2, the tracking range is no less than 70m, and the system has 3D coordinate measurement and 3D visualization functions. At the same time, compared with the existing tracker, it has the advantages in volume, weight and angle measurement range, and has good tracking performance and application prospects.
|
Received: 18 September 2023
Published: 25 March 2024
|
|
Fund:National key research and development plan |
|
|
|
[3] |
孙安斌, 曹铁泽, 王继虎, 等. 高端装备大型零部件几何尺寸测量技术现状及趋势[J]. 计测技术, 2021, 41(2): 41-50.
|
[4] |
梁楚彦, 缪东晶, 李建双,等. 多边法坐标测量系统关键布局参数对测量精度影响的研究[J]. 计量学报, 2023, 44(7): 1009-1018.
|
[5] |
陈相君, 古力那尔·祖农, 薛梓, 等. 基于激光跟踪仪的协作机器人标定算法与实验研究[J]. 计量学报, 2021, 42(5): 552-557.
|
[1] |
SAHU R K. A Review on Application of Laser Trackerin Precision Positioning Metrology of Particle Accelerators [J]. Precision Engineering, 2021, 71:232-249.
|
|
WANG W N, SU Y C, REN G Y. Study on dynamic characteristics of laser tracker [J]. Acta Metrologica Sinica, 2007, 28(1): 34-36.
|
[9] |
刘永东. 运动目标坐标及姿态激光跟踪测量理论与系统研究[D]. 北京: 清华大学, 1999.
|
[6] |
LIU Y J, ZI B, WANG Z Y, et al. Kinematics Calibration of Spraying Robo based on Laser Tracker[C]//IEEE ICMA 2019. Tianjin, 2019.
|
[11] |
谢驰, 周肇飞, 蔡鹏, 等. 激光跟踪测距方法及其应用的研究[J]. 兵工学报,2007, 28 (11): 1377-1381.
|
[13] |
张逸飞. 激光跟踪仪快速跟踪测量关键技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.
|
[14] |
吴婷. 激光跟踪仪长距离光束准直及动态测控技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2016.
|
[17] |
王红智. 相位式激光测距仪自动跟踪技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2021.
|
[10] |
李杏华. 激光跟踪系统的设计[D]. 天津: 天津大学, 2003.
|
[8] |
曹儿方. 激光跟踪仪动态特性研究[D]. 西安: 中国科学院大学(中国科学院西安光精密机械研究所), 2017.
|
[16] |
宋辉旭. 高精度激光追踪测量若干关键技术[D]. 北京: 北京工业大学, 2020.
|
|
SUN A B, CAO T Z, WANG J H, et al. Technological Development Trends of Geometric Dimension Measurements of Large Parts in the High-end Equipment[J].Metrology & Measurement Technology,2021, 41(2): 41-50.
|
[2] |
JIN Z J, KE C S, XIONG R B, et al. Thermal Deformation Compensation of Laser Tracker Relocating in Aircraft Assembly[J]. International Journal of Precision Engineering and Manufacturing, 2020, 21(4): 641-647.
|
|
LIANG C Y, MIAO D J, LI J S, et al. Research on the influence of key layout Parameters on measurement accuracy of multi-lateral coordinate measuring system [J]. Acta Metrologica Sinica, 2023, 44(7):1009-1018.
|
|
CHEN X J, GULINAR ZUNONG, XUE Z, et al. Calibration algorithm and experimental research of collaborative robot based on laser tracker [J]. Acta Metrologica Sinica, 2021, 42(5): 552-557.
|
[7] |
王为农, 苏永昌, 任国营. 激光跟踪仪的动态特性研究[J]. 计量学报, 2007, 28(1): 34-36.
|
|
XIE C, ZHOU Z F, CAI P, et al. Research on laser tracking ranging Method and its application [J]. Acta Ordnance Engineering, 2007, 28 (11): 1377-1381.
|
[15] |
董登峰, 周维虎, 纪荣祎, 等. 激光跟踪仪精密跟踪系统的设[J]. 光学精密工程, 2016, 24(2): 309-318.
|
|
DONG D F, ZHOU W H, JI R Y, et al. Design of precision tracking system for laser tracker [J]. Optics and Precision Engineering,2016, 24(2): 309-318.
|
[12] |
张亚娟. 单站式激光跟踪坐标测量系统研究[D]. 天津: 天津大学, 2012.
|
|
|
|