|
|
Measurement Errors of Piston Pressure Gauge for Mass Weights and Pressure Weights |
PANG Gui-bing1,YANG Yi1,FAN Shuang-jiao1,YANG Yuan-chao2 |
1. College of Mechanical Engineering and Automation,Dalian Polytechnic University,Dalian,Liaoning 116034,China
2. National Institute of Metrology,Beijing 100029,China |
|
|
Abstract The types of weights used in existing piston pressure gauges are pressure nominal weights and mass nominal weights,both of which produce different principles of error and lead to different outcome of error. For free distortion pistons,a pressure error model is developed based on the effect of the deformation coefficient on the effective area of the piston,and a general formula for the relative error in pressure generated by using pressure nominal weights and mass nominal weights is derived. Using a piston pressure gauge with a measurement range of 10 to 510MPa as the object of study,error calculations and comparative analyses are carried out to obtain the variation pattern of the pressure errors of the two types of weights. The results show that,under the same conditions,the pressure scale weights produce an additional error of up to -0.0041%within each pressure band due to the repeated use of small,unnumbered weights compared to the mass scale weights.
|
Received: 21 November 2022
Published: 27 December 2023
|
|
|
|
|
[4] |
洪宝林. 力学计量 [M]. 北京: 原子能出版社, 2002.
|
[9] |
周宇仁, 林正皓, 张忠立. 活塞式压力计无编号砝码的误差分析与修正[J]. 中国仪器仪表, 2022(4): 62-65.
|
|
Wang H Y, Hu S S, Liu Z S, et al. High Precision Deep Sea Pressure Simulation Method with Double Pistons[J]. Acta Metrologica Sinica, 2021, 42(2): 199-203.
|
|
Wang L, Sheng X Y. Piston-Cylinder Assembly Design of the Digital Piston Pressure Gauge[J]. Measurement & Control Technology, 2012, 31(7): 13-15.
|
|
Yang Y C, Yue J, Li Y H. The Effective Area and Distortion Coefficient of CCM. P-K13 Transfer Standard and the Analysis of Uncertainty [J]. Acta Metrologica Sinica, 2011, 32(5): 441-445.
|
[7] |
王琛, 刘环宇, 杨远超, 等. 500MPa活塞式压力计活塞系统关键参数设计[J]. 计量学报, 2021, 42(12): 1624-1628.
|
[8] |
张遥奇, 曾麟, 陈岳飞. 可控间隙活塞式压力计的理论模型构建及其应用[J]. 中国检验检测, 2020, 28(5):17-20.
|
[10] |
张金亮. 气体活塞式压力计压力专用砝码质量的检定问题[J]. 计测技术, 2014, 34(4): 83-85.
|
[11] |
JJG 99-2006 砝码检定规程[S]. 2006.
|
[2] |
王丽, 盛晓岩. 数字式气体活塞式压力计的活塞系统设计[J]. 测控技术, 2012, 31(7): 13-15.
|
[3] |
Heydemann P L M, Welch B E. Experimental Thermodynamics[M]. London: International Union of Pure and Applied Chemistry, 1975: 147-202.
|
[5] |
杨远超, 悦进, 李燕华. CCM. P-K13传递标准的有效面积和形变系数及不确定度分析 [J]. 计量学报, 2011, 32(5): 441-445.
|
|
Zhang Y Q, Zeng L,Chen Y F. Study and Application Theoretical Model of Controlled-clearance Piston Pressure Gauge[J]. China Inspection Body & Laboratory, 2020, 28(5):17-20.
|
|
Zhou Y R, Lin Z H, Zhang Z L. The Error Analysis and Correction about no Order Weights of Piston Gauge[J]. China Instrumentation, 2022(4): 62-65.
|
[18] |
Dadson R S, Lewis S L, Peggs G N. The Pressure Balance: Theory and Practice[M]. London: HMSO, 1982.
|
[1] |
王淮阳, 胡珊珊, 刘正士, 等. 双活塞式高精度深海压力模拟方法[J]. 计量学报, 2021, 42(2): 199-203.
|
[6] |
Scherschligt J, Cross C D, Quintavalle J, et al. Automated Piston Gauge Calibration System[J]. NCSLI Measure, 2018, 12(1): 42-45.
|
|
Wang C, Liu H Y, Yang Y C, et al. Design of Key Parameters of Piston-cylinder Assembly of 500MPa Piston Pressure Gauge[J]. Acta Metrologica Sinica, 2021, 42(12): 1624-1628.
|
|
Zhang J L. Verification of the weight quality of the gas piston manometer pressure special [J]. Metrology & Measurement Technology, 2014,34(4):83-85.
|
[12] |
李燕华. 活塞式压力计专用砝码质量在计算和修正中的问题 [J]. 计量技术, 2007(4): 50-52.
|
[14] |
Kajikawa H, Ide K, Kobata T. Precise determination of the pressure distortion coefficient of new controlled-clearance piston-cylinders based on the Heydemann-Welch model[J]. Review of Scientific Instruments, 2009, 80(9): 095101.
|
[16] |
Yang Y C, Yue J. Determination of the distortion coefficient of a 500 MPa free-deformation piston gauge using a controlled-clearance one up to 200 MPA[C]//XX IMEKO World Congress Metrology for Green Growth. Busan, Korea, 2012.
|
[13] |
Sabuga W, Molinar G, Buonanno G, et al. Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis—EUROMET project 463[J]. Metrologia, 2005, 42(6): S202.
|
[15] |
Fitzgerald M P, Sutton C M. Pressure balance elastic distortion: experiment versus theory[J]. Metrologia, 2005, 42(6): S239.
|
[17] |
Rab S, Yadav S, Haleem A. A laconic capitulation of high pressure metrology[J]. Measurement, 2022, 187: 110226.
|
[19] |
GB/T 30432-2013 液体活塞式压力计[S]. 2013.
|
|
|
|