|
|
|
| Evaluation of Uncertainty in Measurement of Etallographic Microscope Distortion |
| YU Ze-li1,FANG Yong-qiang1,YANG Jun-hong1,2,ZHANG Bing1,ZHANG Yi-xin1,ZHENG Yi1,BI Ge-ping1 |
1. Xi'an Hantang Analysis and Testing Co. Ltd., Xi'an, Shaanxi 710201, China;
2. Northwest Institute for Non-ferrous Metal Research, Xi'an, Shaanxi 710016, China |
|
|
|
|
Abstract Distortion can reflect the deviation between the actual image and the ideal image of a metallographic microscope, and is an important technical indicator for accurate and reliable performance of metallographic microscopes. According to the calibration standard "Evaluation and Representation of Measurement Uncertainty", the distortion measurement process of the metallographic microscope was studied, the mathematical model for the uncertainty evaluation of the distortion measurement results was established, the sources of uncertainty were comprehensively analyzed, and the uncertainty of the distortion measurement results of the metallographic microscope was evaluated.The results show that when the coverage factor k=2, the confidence level is 95%, under the condition of the total magnifications is 50×, 100×, 200×, 500× and 1000×, the relative distortion measurement results of the metallographic microscope is (0.5±0.4)%, (0.3±0.6)%, (1.3±0.4)%, (0.4±0.4)%, (0.9±0.1)%, respectively. The uncertainty of the measurement results mainly comes from the distortion measurement system and repeatability test.
|
|
Received: 12 October 2022
Published: 17 November 2023
|
|
|
|
|
|
|
Xia Y G,Peng Y Z,Liu Z H,et al. The Measurement Uncertainty Evaluation of Linear Regression Fitting. Acta Metrologica Sinica, 2023, 44(4): 664-670.
|
| ［4］ |
陈凌峰. 标准不确定度A类评定中极差法的深入讨论 ［J］. 计量学报, 2019, 40(2): 347-352.
|
| ［9］ |
西安汉唐分析检测有限公司. 一种光学显微镜系统畸变测量方法 ［P］. CN113884283A,2022-01-04.
|
| ［11］ |
西安汉唐分析检测有限公司. 一种光学显微镜畸变测量用线纹尺 ［P］. CN215865750U,2022-02-18.
|
|
Cai X Y, Wei J S, Sun K X, et al. Evaluation of uncertainty inmeasurement withwhite-light interference system ［J］. Acta Metrologica Sinica, 2021, 42 (6): 731-737.
|
| ［6］ |
崔洪州, 孔渊, 周起勃, 等. 基于畸变率的图像几何校正 ［J］. 应用光学, 2006, 27(3): 183-185.
|
| ［14］ |
JJG146-2011 量块检定规程 ［S］.
|
| ［17］ |
Bi G P. The measuring method for actual total magnification of metallographic microscope—digital image method ［J］. Materials Science and Engineering, 2018,(397): 961-972.
|
| ［3］ |
叶德培. 测量不确定度理解评定与应用 ［M］. 北京: 中国质检出版社, 2013.
|
| ［10］ |
JJF 1059.1-2012 测量不确定度评定与表示 ［S］.
|
| ［8］ |
钱磊, 吴丹. 一种标定显微镜镜头畸变的方法 ［J］. 宁波大学学报, 2021, 34(3): 24-29.
|
| ［12］ |
西安汉唐分析检测有限公司. 一种光学显微镜用数码相机转接装置 ［P］.CN215642048U, 2022-01-25.
|
| ［2］ |
夏玉国,彭友志,刘正华,等. 线性回归拟合的测量不确定度评定［J］. 计量学报, 2023, 44(4): 664-670.
|
|
Qian L, Wu D. A method for calibrating the distortion of microscope lens ［J］. Journal of Ningbo University, 2021, 34(3): 24-29.
|
| ［1］ |
蔡潇雨, 魏佳斯, 孙恺欣, 等. 白光干涉测量系统的测量不确定度评定 ［J］. 计量学报, 2021, 42(6): 731-737.
|
|
Chen L F. The Further Discussion of the Range Method in the Type AEvaluation of Sstandard Uncertainty ［J］. Acta Metrologica Sinica, 2019, 40(2): 347-352.
|
| ［5］ |
董章. 适于固体生物大样本的光学显微成像方法初步研究 ［D］. 武汉: 华中科技大学, 2011.
|
|
Cui H Z, Kong Y, Zhou Q B, et al. Image geometric correction based on distortion rate ［J］. Applied Optics, 2006, 27 (3): 183-185.
|
| ［7］ |
施韦特 D, 安胡特 T, 沃尔德 M, 等. 具有低畸变像差的显微镜 ［P］. 德国: CN107003506B, 2020-05-05.
|
| ［13］ |
JJG117-2013 平板检定规程 ［S］.
|
| ［15］ |
JJG73-2005 高等别线纹尺检定规程 ［S］.
|
| ［16］ |
吴伯群, 毕革平. 一种实现显微镜照相系统计算机化的方法 ［P］. CN1220403A, 1999-06-23.
|
|
|
|
2023, Vol. 44 
