|
|
Parameter Identification of Linear-angular Vibration Exciter Based on Electromechanical Analogy |
YANG Jian-gen1,TANG Bo1,2,CHEN Wei2,YU Jin-hui1 |
1. College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. Ningbo Water Meter (Group) Co.,Ltd, Ningbo, Zhejiang 315033, China |
|
|
Abstract Aiming at the problem that the dynamic parameters of the electromagnetic linear-angular vibration exciter are difficult to obtain directly, a dynamic parameter identification method based on the principle of electromechanical analogy is proposed, which can obtain the dynamic parameters of uniaxial and coupling vibration of the exciter. Firstly, the structural and working principle of the electromagnetic linear-angular vibration exciter are introduced, and the motion differential equations of uniaxial vibration and coupling vibration are established. Secondly, based on the admittance electromechanical analogy principle, the electromechanical analogy models of uniaxial vibration and coupled vibration with mechanical parameters are established. Finally, the impedance formula containing dynamic parameters is established according to the electromechanical ratio model, and the dynamic parameter identification model of the exciter is obtained by combining the additional mass method. The validity of the model is further verified by numerical simulation. The simulation results show that this method has high identification accuracy and anti-noise ability, and the identification relative errors of each parameter are within 5%.
|
Received: 15 July 2022
Published: 10 October 2023
|
|
|
|
|
[7] |
张旭飞, 姜文琦, 胡天恩, 等. 低频电磁振动台非均匀气隙磁场优化设计 [J]. 计量学报, 2022, 43(1):85-91.
|
[16] |
唐波, 何闻. 宽频带电磁式角振动台运动部件动态优化设计 [J]. 农业机械学报, 2015, 46(10):376-382, 390.
|
|
Zhang X F, Zhang F Y, Li K, et al. Optimization of leaf-spring-type recovery mechanism for low-frequency standard vibrator based on genetic algoorithm [J]. Acta Metrologica Sinica, 2021, 42(11):1459-1456.
|
[2] |
唐波, 何闻, 刘爱东. 宽频带电磁式角振动校准系统研究进展 [J]. 计量学报, 2021, 42(10):1328-1334.
|
[3] |
Takiguchi M, Sugimoto H, Kurihara N, et al. Acoustic noise and vibration reduction of SRM by elimination of third harmonic component in sum of radial forces [J]. IEEE Transactions on Energy Conversion, 2015, 30(3): 883-891.
|
[5] |
邱汉平, 冯咬齐, 樊世超. 多轴随机振动试验控制技术研究 [J]. 航天器环境工程, 2015, 32(5):527-531.
|
|
Qiu H P, Feng Y Q, Fan S C. The multi-axis random vibration test control techniques [J]. Spacecraft Environment Engineering, 2015, 32(5):527-531.
|
[14] |
Saraswat A, Tiwari N. Modeling and study of nonlinear effects in electrodynamic shakers[J]. Mechanical Systems and Signal Processing, 2017, 85: 162-176.
|
[1] |
张旭飞, 张锋阳, 李凯, 等. 基于遗传算法的低频标准振动台簧片式回复结构优化 [J]. 计量学报, 2021, 42(11):1459-1465.
|
[6] |
Guo Y Q, Li Z Y, Yang X L. Research on Structure Design of Mechanical Shaking Table and Its Waveform Recurrence Performance Test [J]. Aerospace Shanghai, 2021, 38(1):53-60.
|
|
Zhang X F, Jiang W Q, Hu T E, et al. Optimization design of non-uniform air gap magnetic field for low-frequency electromagnetic vibrator [J]. Acta Metrologica Sinica, 2022, 43(1):85-91.
|
[9] |
Kwon J, Choi K, Park F C. Kinodynamic Model Identification: A Unified Geometric Approach [J]. IEEE Transactions on Robotics, 2021, 37(4): 1100-1114.
|
[11] |
Wen Q, Hua X G, Chen Z Q, et al. Modal parameter identification of a long-span footbridge by forced vibration expeirments [J]. Advances in Structural Engineering, 2017, 20(5), 661-673.
|
[15] |
Tiwari N, Puri A, Saraswat A. Lumped parameter modelling and methodology for extraction of model parameters for an electrodynamic shaker [J]. Journal of Low Frequency Noise, Vibration and Active Control, 2017, 36(2): 99-115.
|
|
Tang B, He W. Dynamic optimization deaign of moving component for broadband electromagnetic angular vibrator[J]. Transactions of the Chinede Society for Agricultural Machinery, 2015, 46(10):376-382, 390.
|
[4] |
Zhai G, Yang X, Lü Q. A calibration system of resonant high-acceleration and metrological traceability [J]. Measurement Science and Technology. 2021, 32(12):125904.
|
[12] |
Xia J N, Song H W. Modal parameter identification of structure under base excitation using vibration test data [J]. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering, 2016, 231(G8):1428-1450.
|
|
Tang B, He W, Liu A D. Research progress on broadband electromagnetic angular vibration calibration system [J]. Acta Metrologica Sinica, 2021, 42(10):1328-1334.
|
[10] |
Ng C T, Au S K. Mode shape scaling and implications in modal identification with known input [J]. Engineering Structures, 2018, 156:411-416.
|
[8] |
Ni H, Zhang C, Hu T, et al. A dynamic parameter identification method of industrial robots considering joint elasticity [J]. International Journal of Advanced Robotic Systems, 2019, 16(1).
|
[13] |
López-Martínez J, Martínez J C, García-Vallejo D, et al. A new electromechanical analogy approach based on electrostatic coupling for vertical dynamic analysis of planar vehicle models [J]. IEEE Access, 2021, 9: 119492-119502.
|
[17] |
Huang Q W, Liu H Y, Cao J Y. Investigation of Lumped-Mass Method on Coupled Torsional-longitudinal Vibrations for a Marine Propulsion Shaft with Impact Factors [J]. Journal of Marine Science and Engineering, 2019, 7(4):95-95.
|
|
|
|