|
|
Design and Experimental Research of Radial Magnetization Electromagnetic Sensor |
TANG Bo1,2,GUO Bi-ben1,CHEN Wei2,TAN Long2 |
1. College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. Ningbo Water Meter (Group) Co. Ltd, Ningbo, Zhejiang 315033, China
|
|
|
Abstract A radially magnetized electromagnetic sensor is proposed for the detection of the defects of the traction steel strip, which can realize the accurate detection of the defects of the traction steel strip in-situ nondestructive. Based on the electromagnetic coupling and the magnetic properties of high magnetic permeability materials, an equivalent model of the radially magnetized electromagnetic sensor is established by using the finite element analysis method. The laws of influence of the magnitude of the magnetic induction at the measurement location of the magnetized electromagnetic sensor. Finally, a radially magnetized electromagnetic sensor is prepared on the basis of numerical simulation and to measure its performance, and it is further applied to the defect detection of traction steel strips. The experimental results show that the system can realize the broken strand with a resolution of 0.5mm. This demonstrated that a feasible solution is provided for the defect detection of traction steel strips.
|
Received: 12 July 2022
Published: 10 October 2023
|
|
|
|
|
[4] |
唐波, 陈慎慎, 郭必奔, 等. 基于特征参数迁移的滚动轴承故障诊断 [J]. 计量学报, 2022, 43(3): 386-391.
|
[5] |
许鹏, 耿明, 方舟, 等. 基于复合电磁的高速轨道缺陷检测方法研究 [J]. 机械工程学报, 2021, 57(18): 57-65.
|
[12] |
Ripka P. Magnetic sensors and magnetometers [M]. 2nd ed. London: Artech House, 2021: 29-33.
|
[2] |
史荣, 魏英杰, 王劲东. 钢丝绳缺陷的微磁无损检测技术研究 [J]. 计量学报, 2015, 36(3): 303-308.
|
[7] |
张智超, 沈常宇, 朱周洪, 等. 漏磁结合涡流的非铁磁性金属材料探伤研究 [J]. 仪器仪表学报, 2021, 42(4): 150-159.
|
[13] |
余亚东, 宋凯, 李光海, 等. 多通道低频电磁传感器的仿真及优化 [J]. 仪器仪表学报, 2019, 40(10): 19-27.
|
[14] |
常予, 焦敬品, 李光海, 等. 漏磁传感器励磁结构影响因素分析及优化设计 [J]. 机械工程学报, 2018, 54(24): 7-17.
|
[1] |
Zhang D L, Zhang E C, Yan X L. Quantitative method for detecting internal and surface defects in wire rope [J]. NDT & E International, 2021, 119(3): 102405.
|
|
Ji Y Y, Liu Y N, Deng C X, et al. Research on the Testing of Adhesive Defects of Aeronautical Composites Based on ECT [J]. Acta Metrologica Sinica, 2019, 40(6): 952-957.
|
|
Tang B, Chen S S, Guo B B, et al. Fault diagnosis of rolling bearings based on migration of characteristic parameters [J]. Acta Metrologica Sinica, 2022, 43(3): 386-391.
|
[16] |
任飞安, 许金鑫, 由强, 等. 能量天平永磁体系统的温度场分析 [J]. 计量学报, 2019, 40(3): 353-360.
|
|
Shi R, Wei Y J, Wang J D. Wire rope defects with the micro-magnetic NDT technology [J]. Acta Metrologica Sinica, 2015, 36(3): 303-308.
|
|
Xu P, Geng M, Fang Z, et al. Study on high-speed rail defect detection method based on combination of EC and MFL testing [J]. Journal of Mechanical Engineering, 2021, 57(18): 57-65.
|
|
Zhang Z C, Shen C Y, Zhu Z H, et al. Magnetic flux leakage combined with eddy current for non-ferromagnetic metal materials damage detection [J]. Chinese Journal of Scientific Instrument, 2021, 42(4): 150-159.
|
[8] |
周德强, 田贵云, 王海涛, 等. 脉冲涡流技术在应力检测中的应用 [J]. 仪器仪表学报, 2010, 31(7): 1588-1593.
|
[9] |
Raisutis R, Kazys R, Mazeika L, et al. Propagation of ultrasonic guided waves in composite multi-wire ropes [J]. Materials, 2016, 9(6): 451.
|
[11] |
Sun Y H, Feng B, Liu S W, et al. A methodology for identifying defects in the magnetic flux leakage method and suggestions for standard specimens [J]. Journal of Nondestructive Evaluation, 2015, 34(3): 1-9.
|
|
Chang Y, Jiao J P, Li G H, et al. Influencesand optimization of excitation structure of magnetic flux leakage sensor [J]. Journal of Mechanical Engineering, 2018, 54(24): 7-17.
|
[15] |
于新龙, 徐科军, 许伟, 等. 基于间歇励磁和信号重构的电磁水表变送器研制 [J]. 计量学报, 2021, 42(9): 1160-1166.
|
[6] |
Carboni M, Crivelli D. An acoustic emission based structural health monitoring approach to damage development in solid railway axles [J]. International Journal of Fatigue, 2020, 139: 105753.
|
|
Yu Y D, Song K, Li G H, et al. Simulation and optimization of multichannel low frequency electromagnetic sensor [J]. Chinese Journal of Scientific Instrument, 2019, 40(10): 19-27.
|
[3] |
季厌庸, 刘亚楠, 邓晨肖, 等. 基于ECT的航空复合材料缺陷检测研究 [J]. 计量学报, 2019, 40(6): 952-957.
|
|
Zhou D Q, Tian G Y, Wang H T, et al. Evaluation of applied stress using pulsed eddy current technology [J]. Chinese Journal of Scientific Instrument, 2010, 31(7): 1588-1593.
|
[10] |
Lei H M, Tian G Y, Zhao H, et al. Health monitoring for coated steel belts in an elevator system [J]. Journal of Sensors, 2012, 2012(3): 276-283.
|
|
Yu X L, Xu K J, Xu W, et al. Development of electromagnetic water meter transmitter based on intermittent excitation and signal reconstruction [J]. Acta Metrologica Sinica, 2021, 42(9): 1160-1166.
|
|
Ren F A, Xu J X, You Q, et al. Thermal analysis of permanent-magnet system in the joule balance [J]. Acta Metrologica Sinica, 2019, 40(3): 353-360.
|
|
|
|