|
|
Research on Calibration Technology of Reciprocal Piezoelectric Accelerometer |
LÜ Si-yao1,CAI Chen-guang2,KONG Ming1,YANG Ming3,LIU Zhi-hua2,LÜ Qi2 |
1. Collage of Metrology & Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. National Institute of Metrology, Beijing 100029, China
3. The Electrical Engineering College, Guizhou University, Guiyang, Guizhou 550025, China |
|
|
Abstract A calibration method for piezoelectric accelerometers with internal driving components was introduced. Based on the calibration principle of the reciprocal method, the reciprocal piezoelectric accelerometer can be calibrated by measuring the ratio and product of the two port sensitivities through two experiments. By establishing the vibration equation and mechanical model of the reciprocal piezoelectric accelerometer, the frequency response characteristics of the sensitivity ratio, sensitivity product and self-calibration coefficient are analyzed, and the corresponding measurement methods are explained. The comparison validation experiment between this method and the laser interferometry was carried out, the experimental results show that in the frequency range of 5~4000Hz, the average relative deviation of the sensitivity of the two ports does not exceed 1% and 2%, respectively, and the maximum relative deviation does not exceed 2% and 4%, respectively.
|
Received: 07 May 2022
Published: 17 July 2023
|
|
Fund:Funded by the National Key R&D Program |
|
|
|
[1] |
Ghemari Z, Saad S, Khettab K. Improvement of the Vibratory Diagnostic Method by Evolution of the Piezoelectric Sensor Performances[J]. International Journal of Precision Engineering and Manufacturing, 2019, 20(8):1361-1369.
|
|
Yuan Y P, Wang D P, Li X F, et al. Design of High Sensitive Piezoelectric Accelerometer for Nuclear Power Status Monitoring [J]. Piezoelectrics and Acoustooptics, 2019, 41(1): 49-52.
|
|
Yang M, Cai C G, Liu Z H, et al. Research on the Method of the Triaxial Primary Vibration Calibration Using the Heterodyne Interferometry [J]. Acta Metrologica Sinica, 2018, 39(2):201-206.
|
[5] |
王朝, 蔡晨光, 杨明, 等. 基于激光干涉仪数字信号解码的振动校准方法[J]. 计量学报, 2021, 198(3):282-286.
|
[7] |
杨明, 赵焕兴,刘志华, 等. 基于地球重力法的低频加速度计校准[J]. 计量学报, 2022, 43(8): 1064-1069.
|
[8] |
匙庆磊. 低频标准振动台系统和振动校准技术研究 [D]. 黑龙江:中国地震局工程力学研究所, 2014.
|
[11] |
梁志国, 吕国义, 尹肖, 等. 一种适用于现场原位校准的双输入激励方法[J]. 计量学报, 2019, 40(1): 140-145.
|
[13] |
Trent H M. The absolute calibration of electromechanical pickups[J]. Journal of Applied Mechanics, 1948, 15(1): 49-52.
|
|
Wang Z, Cai C G, Yang M, et al. Vibration Calibration Method Based on the Decoding of Heterodyne Interferometer Output S/PDIF Digital Signal[J]. Acta Metrologica Sinica, 2021, 198(3):282-286.
|
|
Zhu G, Yang X W, Dai Y L, et al. Portable Low-frequency Vibration Calibration System for Field Service [J]. Journal of Astronautic Metrology and Measurement, 2020, 40(6):20-24.
|
|
Liang Z G, Lü G Y, Yin X, et al. A Novel on Site Calibration Method by Using Double Stimulationsl[J]. Acta Metrologica Sinica, 2019, 40(1):140-145.
|
[15] |
林劲. 校准标准加速度计的一种互易法[J]. 计量学报, 1980, 1(2):152-156.
|
[16] |
吴慧新, 韩晓林. 加速度传感器互易校准的新方法[J]. 振动、测试与诊断, 2001, 21(2):55-58.
|
[18] |
ISO 16063-12 Methods for the calibration of vibration and shock transducers-Part12: Primary vibration calibration by the reciprocity method[S]. 2002.
|
[19] |
Reguieg S K, Ghemari Z, Benslimane T, et al. Modeling and Enhancement of Piezoelectric Accelerometer Relative Sensitivity [J]. Sensing and Imaging, 2019, 20(1):1-14.
|
[21] |
陈涛. 惯性压电激振系统的研究[D]. 天津:天津大学, 2013.
|
[4] |
董雪明, 王敏林. 基于离心-振动复合装置的加速度计整流误差校准[J]. 计量学报, 2022, 43(9): 1166-1171.
|
[10] |
鲁敏. 一种自校准压电加速度计[J]. 宇航计测技术, 1995, 15(2):57-60.
|
|
Wu H X, Han X L. A New Method for Reciprocal Calibration of Accelerometers[J]. Journal of Vibration, Measurement & Diagnosis, 2001, 21(2): 55-58.
|
[3] |
杨明, 蔡晨光, 刘志华, 等. 基于外差激光干涉法的三轴向振动绝对校准方法研究[J]. 计量学报, 2018, 39(2): 201-206.
|
[9] |
朱刚, 杨晓伟, 戴宜霖, 等. 便携式现场低频振动校准装置[J]. 宇航计测技术, 2020, 40(6): 20-24.
|
|
Lin J. A Reciprocal Method for Calibrating Standard Accelerometers [J]. Acta Metrologica Sinica, 1980, 1 (2):152-156.
|
[2] |
袁宇鹏, 王登攀, 李小飞, 等. 面向核电状态监测用的压电加速度传感器设计[J]. 压电与声光, 2019, 41(1):49-52.
|
|
Dong X M, Wang M L. Rectification Error Calibration of Accelerometer Based on Centrifugal-Vibration Composite Device[J]. Acta Metrologica Sinica, 2022, 43(9): 1166-1171.
|
|
Yang M, Zhao H X, Liu Z H, et al. Calibration of Low Frequency Accelerometer Based on the Earths Graviation Method[J]. Acta Metrologica Sinica, 2022, 43(8): 1064-1069.
|
|
Lu M. A self-calibrating piezoelectric accelerometer [J]. Journal of Astronautic Metrology and Measurement, 1995, 15(2):57-60.
|
[14] |
Ramboz J D. Absolute calibration of vibration standards by the three-mass reciprocity method[R]. National Bureau of Standards Report No.Nbsir, 1974:74-481.
|
[17] |
ISO 16063-11 Methods for the calibration of vibration and shock transducers-Part11: Primary vibration calibration by laser interferometry[S]. 1999.
|
[6] |
Yang M, Zhu H J, Cai C G, et al. Monocular Vision-Based Earths Graviation Method Used for Low-Frequency Vibration Calibration [J]. IEEE Access, 2020, 8:129087-129093.
|
[12] |
Atherton W J, Flanagan P M. A self diagnostic system for piezoelectric sensors[C]//AIAA, ASME, SAE, & ASEE, Joint Propulsion Conference, 25th Joint Propulsion Conference, 2013.
|
[20] |
唐旭晖. 压电加速度计有限元模型及其应用研究[D]. 秦皇岛:燕山大学, 2012.
|
|
|
|