|
|
Study on the Measurement of the Emissivity Distribution of Flat PlateRadiation Source Based on the Integrating Sphere Reflection Method |
LIU Guang-yu1,HUAN Ke-wei1,AN Bao-lin2,DONG Wei2,ZHAO Yun-long2,SONG Xu-yao3,YUAN Zun-dong2 |
1. Changchun University of Science and Technology, Changchun, Jilin 130022, China
2. National Institute of Metrology,Beijing 100029, China
3. Beijing Aeronautical Engineering Technology Research Center, Beijing 100084, China |
|
|
Abstract The measurement of emissivity distribution characteristics is an important basis for evaluating the radiation uniformity of large-aperture radiation sources, but the related research is relatively scarce at present. Therefore, a measurement system for the emissivity distribution characteristics of the infrared radiation source is designed and built based on complete hemispherical laser integrated reflection scheme. The performance of the measurement system is studied, the stability of the laser light source subsystem is evaluated, and the experiment of measuring the emissivity distribution characteristics of surface radiation source is carried out at 3 W laser power. The results show that the measurement system has good stability. Taking the surface of standard gold plate as the research object, the repeatability of multiple measurement results is 0.30%; The experimental measurement of emissivity distribution of carbon based surface radiation source is carried out, and the distribution cloud map of emissivity of surface radiation source is obtained, the uniformity of emissivity is 98.1%.
|
Received: 17 May 2022
Published: 18 April 2023
|
|
Fund:Research on measurement technology of spatial distribution of radiation characteristics of blackbody surface source and complex structure |
|
|
|
[10] |
宋旭尧, 董伟, 潘奕捷, 等. 基于集成黑体法1000~1500℃石墨材料高温红外光谱发射率测量[J].红外与毫米波学报, 2021, 40(2): 204-213.
|
[1] |
臧延哲, 董伟, 宦克为, 等. 半透明材料红外光谱发射率测量研究[C]//第七届全国温度测量与控制技术学术交流会.杭州, 2015.
|
[5] |
韩伟, 刘岩, 杜蕾, 等. 发射率对半导体器件显微红外测温结果的影响[J].计量学报, 2021, 42(1): 35-40.
|
[4] |
戴景民, 宋扬, 王宗伟.光谱发射率测量技术[J].红外与激光工程, 2009, 38(4): 710-715.
|
[9] |
邵春滕, 宦克为, 李志彬, 等.基于激光积分球反射计的集成黑体发射率测量研究[J].计量学报, 2019, 40(3): 427-431.
|
[16] |
Gene J, Jeon M Y, Lim S D. Reflectometers for Absolute and Relative Reflectance Measurements in the Mid-IR Region at Vacuum[J]. Sensors, 2021: 21(4): 1169.
|
[8] |
熊兵, 石小江, 陈洪敏, 等.航空发动机涡轮叶片发射率测量[J].燃气涡轮试验与研究, 2011, 24(2): 45-48.
|
[6] |
刘波, 郑伟, 李海洋.材料表面发射率测量技术研究进展[J].红外技术, 2018, 40(8): 725-732.
|
|
Dai J M, Song Y, Wang Z W. Review of spectral emissivity measurement[J]. Infrared and laser engineering, 2009, 38(4): 710-715.
|
[17] |
宋贵才, 全薇, 宦克为, 等.红外物理学[M].北京:清华大学出版社, 2018.
|
[3] |
曾鸣, 熊磊, 侯志全,等.材料发射率检测方法研究进展[J].绿色环保建材, 2020(12): 3-4.
|
[15] |
张会燕. 基于积分球的发射率测量装置及纯铜在热氧化过程中的发射率研究[D]. 新乡: 河南师范大学, 2019.
|
[2] |
杨白雪, 杜永明, 肖青, 等.蒙特卡洛方法研究积分球测量发射率的影响因素[J].遥感技术与应用, 2017, 32(1): 149-157.
|
|
Zhang S K, Cai J, Yang Y J. Research and Progress on Material spectral Emissivity Measurement[J]. Industrial metrology, 2013, 23 (6): 5-9.
|
|
Xiong B Shi X J, Chen H M, et al. Emissivity Measurement of Aeroengine Turbine Blade[J]. Gas turbine test and research, 2011, 24 (2): 45-48.
|
|
Shao C T, H K W, Li Z B, et al. Research on Integrated Blackbody Emissivity Measurement Based on Laser Integral Sphere Reflectometry[J].Acta Metrologica Sinica, 2019, 40 (3): 427-431.
|
[12] |
Hanssen L, Mekhontsev S N, Khromchenko V B, et al. Infrared Spectral Emissivity Characterization Facility at NIST[C]//Thermosense XXVI. Orlando, FL, United States, 2004.
|
[13] |
Zeng J N, Hanssen L. An infrared laser-based reflectometer for low reflectance measurements of samples and cavity structures[C]//Reflection, Scattering, and Diffraction from Surfaces. San Diego, California, United States, 2008.
|
[14] |
张宇峰, 戴景民, 张昱, 等.基于积分球反射计的红外光谱发射率测量系统校正方法[J].光谱学与光谱分析, 2013, 33(8): 2267-2271.
|
|
Han W,Liu Y,Du Lei,et al. Influence of Emissivity of Infrared Thermal Results of Semiconductor Device[J].Acta Metrologica Sinica, 2021, 42(1): 35-40.
|
|
Song X Y, Dong W, Pan Y J, et al. The infrared spectral emissivity measurement of a graphite material in a high temperature range of 1000~1500℃ using integrated blackbody principle[J]. Journal of infrared and millimeter wave, 2021, 40(2): 204-213.
|
|
Yang B X, Du Y M, Xiao Q, et al.Study of Effecting Factors on Emissivity Measurement by Integrating Sphere with Monte Carlo Simulation[J]. Remote sensing technology and application, 2017, 32 (1): 149-157.
|
|
Liu B, Zheng W, Li H Y. Research and Progress on Material Surface Emissivity Measurement[J]. Infrared technology, 2018, 40 (8): 725-732.
|
[7] |
张术坤, 蔡静, 杨永军.材料光谱发射率测量技术研究进展[J].工业计量, 2013, 23(6): 5-9.
|
[11] |
Hanssen L M, Mekhontsev S N, Khromchenko V B. Validation of the Infrared Emittance Characterization of Materials Through Intercomparison of Direct and Indirect Methods[J]. International Journal of Thermophysics, 2010, 31: 1972-1978.
|
|
Zhang Y F, Dai J M, Zhang Y, et al. Correction Method for Infrared Spectral Emissivity Measurement System Based on Integrating Sphere Reflectometer[J]. Spectroscopy and spectral analysis, 2013, 33(8): 2267-2271.
|
|
|
|